Re: [PATCH 0/6] i2c: designware: Generic polling mode code

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

On 2/1/24 14:08, Andy Shevchenko wrote:
> On Wed, Jan 31, 2024 at 04:16:46PM +0200, Jarkko Nikula wrote:
>> Hi Jiawen, Sanket and Basavaraj
>>
>> Could you test on your Wangxun 10Gb NIC and AMD NAVI GPU harware this
>> patchset since it's touching both.
>>
>> For the AMD NAVI GPU and changes are less but for the Wangxun 10Gb NIC
>> patchset replaces the txgbe_i2c_dw_xfer_quirk() with generic polling mode
>> code.
>>
>> I've been testing this on our HW which all have interrupt connected and
>> tried to cover also FIFO depth defines for Wangxun 10Gb NIC. Obviously I
>> would like to know how this set works on your real HW.
> 
> ...
> 
>> Jarkko Nikula (6):
>>    i2c: designware: Uniform initialization flow for polling mode
>>    i2c: designware: Do not enable interrupts shortly in polling mode
>>    i2c: designware: Use accessors to DW_IC_INTR_MASK register
>>    i2c: designware: Move interrupt handling functions before
>>      i2c_dw_xfer()
>>    i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
>>    i2c: designware: Implement generic polling mode code for Wangxun 10Gb
>>      NIC
> 
> Last two patches named the same, Something is screwed up.
> 
Indeed, thanks Andy. 5/5 was accidental left over file.