From: Dmitry Osipenko <digetx@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>,
thierry.reding@gmail.com, jonathanh@nvidia.com,
wsa@the-dreams.de
Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-i2c@vger.kernel.org
Subject: Re: [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
Date: Tue, 12 Jan 2021 22:17:08 +0300 [thread overview]
Message-ID: <7858911f-4a37-a578-45ed-7522d06d735c@gmail.com> (raw)
In-Reply-To: <1610478161-4877-2-git-send-email-skomatineni@nvidia.com>
12.01.2021 22:02, Sowjanya Komatineni пишет:
> VI I2C controller has known hardware bug where immediate multiple
> writes to TX_FIFO register gets stuck.
>
> Recommended software work around is to read I2C register after
> each write to TX_FIFO register to flush out the data.
>
> This patch implements this work around for VI I2C controller.
You could have kept Thierry's ack since it was given to the fix in
general. No need to make v4.
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
> drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 6f08c0c..4a27782 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
> /* read back register to make sure that register writes completed */
> if (reg != I2C_TX_FIFO)
> readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
> + else if (i2c_dev->is_vi)
> + readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
> }
>
> static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
> @@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
> writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
> }
>
> +static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
> + unsigned int reg, unsigned int len)
> +{
> + u32 *data32 = data;
> +
> + /*
> + * VI I2C controller has known hardware bug where writes get stuck
> + * when immediate multiple writes happen to TX_FIFO register.
> + * Recommended software work around is to read I2C register after
> + * each write to TX_FIFO register to flush out the data.
> + */
> + while (len--)
> + i2c_writel(i2c_dev, *data32++, reg);
> +}
> +
> static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
> unsigned int reg, unsigned int len)
> {
> @@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
> i2c_dev->msg_buf_remaining = buf_remaining;
> i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
>
> - i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
> + if (i2c_dev->is_vi)
> + i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
> + else
> + i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
>
> buf += words_to_transfer * BYTES_PER_FIFO_WORD;
> }
>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
next prev parent reply other threads:[~2021-01-12 19:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-12 19:02 [PATCH v3] Create i2c_writesl_vi() to use with VI I2C Sowjanya Komatineni
2021-01-12 19:02 ` [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO Sowjanya Komatineni
2021-01-12 19:17 ` Dmitry Osipenko [this message]
2021-01-15 15:57 ` Thierry Reding
2021-01-17 11:24 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7858911f-4a37-a578-45ed-7522d06d735c@gmail.com \
--to=digetx@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=skomatineni@nvidia.com \
--cc=thierry.reding@gmail.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox