From: Thor Thayer <thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/3] Documentation: dt: i2c: Add Altera I2C Controller
Date: Fri, 14 Apr 2017 08:46:28 -0500 [thread overview]
Message-ID: <7c803e53-5c1b-cd59-6c59-5a32b07edcb8@linux.intel.com> (raw)
In-Reply-To: <20170413212240.uxwh5525baqmgny4@rob-hp-laptop>
Hi Rob,
On 04/13/2017 04:22 PM, Rob Herring wrote:
> On Tue, Apr 11, 2017 at 11:02:26AM -0500, thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org wrote:
>> From: Thor Thayer <thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>>
>> Add the documentation to support the Altera I2C Controller.
>
> "dt-bindings: i2c: ..." for the subject.
>
Got it. Thanks.
>>
>> Signed-off-by: Thor Thayer <thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>> ---
>> .../devicetree/bindings/i2c/i2c-altera.txt | 37 ++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-altera.txt
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-altera.txt b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
>> new file mode 100644
>> index 0000000..a67241c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-altera.txt
>> @@ -0,0 +1,37 @@
>> +* Altera I2C Controller
>
> This is the only one? For synthesizable logic or a hard block in
> socfpga?
>
This is synthesizable logic in an FPGA.
>> +
>> +Required properties :
>> + - compatible : should be "altr,sip-i2c"
>
> Seems kind of generic.
>
I'm using sip for soft IP - right now we only offer 1 flavor.
>> + - reg : Offset and length of the register set for the device
>> + - interrupts : <IRQ> where IRQ is the interrupt number.
>> + - clocks : phandles to input clocks.
>
> Need to specify how many clocks.
>
OK. There is only 1 so I'll change to singular. phandle to input clock.
>> + - #address-cells = <1>;
>> + - #size-cells = <0>;
>> +
>> +Recommended properties :
>> + - clock-frequency : desired I2C bus clock frequency in Hz.
>> +
>> +Optional properties :
>> + - altr,fifo-size : Size of the RX and TX FIFOs.
>
> in bytes?
>
> Just "fifo-size" is already fairly common, so drop the vendor prefix.
>
Yes, it is in bytes. I'll make the change.
Thanks for reviewing!
>> + - Child nodes conforming to i2c bus binding
>> +
>> +Example :
>> +
>> + i2c@100080000 {
>> + compatible = "altr,sip-i2c";
>> + reg = <0x00000001 0x00080000 0x00000040>;
>> + interrupt-parent = <&intc>;
>> + interrupts = <0 43 4>;
>> + clocks = <&clk_0>;
>> + clock-frequency = <100000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + altr,fifo-size = <4>;
>> +
>> + eeprom@51 {
>> + compatible = "atmel,24c32";
>> + reg = <0x51>;
>> + pagesize = <32>;
>> + };
>> + };
>> +
>> --
>> 1.9.1
>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-04-14 13:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-11 16:02 [PATCH 0/3] Add Altera I2C Controller Driver thor.thayer
2017-04-11 16:02 ` [PATCH 1/3] MAINTAINERS: " thor.thayer
2017-04-11 16:02 ` [PATCH 2/3] Documentation: dt: i2c: Add Altera I2C Controller thor.thayer
[not found] ` <1491926547-29510-3-git-send-email-thor.thayer-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-04-13 21:22 ` Rob Herring
2017-04-14 13:46 ` Thor Thayer [this message]
[not found] ` <7c803e53-5c1b-cd59-6c59-5a32b07edcb8-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2017-04-20 15:47 ` Rob Herring
[not found] ` <CAL_JsqLcrFsRDXfVUtnvUT+RWuk-eduJKV9vN94_d9TswEuCdQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-05-05 14:55 ` Thor Thayer
2017-04-11 16:02 ` [PATCH 3/3] i2c: altera: Add Altera I2C Controller driver thor.thayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7c803e53-5c1b-cd59-6c59-5a32b07edcb8@linux.intel.com \
--to=thor.thayer-vuqaysv1563yd54fqh9/ca@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).