From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Andrej *" Subject: i2c isa and 2.6.24 Date: Fri, 8 Feb 2008 12:06:09 +0100 Message-ID: <7ed6758e0802080306v4ca26537ob578de47a03f8035@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org List-Id: linux-i2c@vger.kernel.org Hello I have ABIT bx6 v2 MB, sensor chip w83781d (isa bus). I have these modules : CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_LM90=m which are modprobe-d without problem. Emerged lm_sensors 2.10.4 (also tried lm sensors 3.0.1), but all I get is temperature from nvidia card and NOT from MB. Nvidia is also only hwmon device in sys/clas/... hwmon0. Code: lm99-i2c-2-4c Adapter: NVIDIA i2c adapter G/C Temp: +37.0 C (low = +0.0 C, high = +90.0 C) (crit = +127.0 C, hyst = +117.0 C) GPU Temp: +49.6 C (low = +5.0 C, high = +105.0 C) (crit = +143.0 C, hyst = +133.0 C) Sensors-detects shows right module for MB, but there ins't any temperature readings. Code: Some chips are also accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM78-J' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... Success! (confidence 8, driver `w83781d') Probing for `Silicon Integrated Systems SIS5595'... No Probing for `VIA VT82C686 Integrated Sensors'... No Probing for `VIA VT8231 Integrated Sensors'... No Probing for `IPMI BMC KCS' at 0xca0... No Probing for `IPMI BMC SMIC' at 0xca8... No Before 2.6.24 I had also i2c_isa module, but there isn't any in latest kernel, and I think that lack ot it is causing problem. How can I get temperature, voltage and fan readings for MB with 2.6.24 kernel? _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c