Re: [RESEND v4 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188

[Matthias Brugger <matthias.bgg@gmail.com>]

On 08/07/2022 05:47, kewei.xu@mediatek.com wrote:
> From: Kewei Xu <kewei.xu@mediatek.com>
> 
> Add i2c compatible for MT8188. Compare to MT8192 i2c controller,
> The MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94.
> 

Having a look at mt8192_compat there seem to be more changes. I suppose you 
wanted to say, that in the register mapping the only difference is the 
OFFSET_SLAVE_ADDR address, that changes.

Regards,
Matthias

> Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
> ---
> v4: no changes
> V3: no changes
> V2: added mt_i2c_regs_v3[] to replace slave_addr_version.
> ---
>   drivers/i2c/busses/i2c-mt65xx.c | 43 +++++++++++++++++++++++++++++++++
>   1 file changed, 43 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 8e6985354fd5..70aff42adf5d 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -229,6 +229,35 @@ static const u16 mt_i2c_regs_v2[] = {
>   	[OFFSET_DCM_EN] = 0xf88,
>   };
>   
> +static const u16 mt_i2c_regs_v3[] = {
> +	[OFFSET_DATA_PORT] = 0x0,
> +	[OFFSET_SLAVE_ADDR] = 0x94,
> +	[OFFSET_INTR_MASK] = 0x8,
> +	[OFFSET_INTR_STAT] = 0xc,
> +	[OFFSET_CONTROL] = 0x10,
> +	[OFFSET_TRANSFER_LEN] = 0x14,
> +	[OFFSET_TRANSAC_LEN] = 0x18,
> +	[OFFSET_DELAY_LEN] = 0x1c,
> +	[OFFSET_TIMING] = 0x20,
> +	[OFFSET_START] = 0x24,
> +	[OFFSET_EXT_CONF] = 0x28,
> +	[OFFSET_LTIMING] = 0x2c,
> +	[OFFSET_HS] = 0x30,
> +	[OFFSET_IO_CONFIG] = 0x34,
> +	[OFFSET_FIFO_ADDR_CLR] = 0x38,
> +	[OFFSET_SDA_TIMING] = 0x3c,
> +	[OFFSET_TRANSFER_LEN_AUX] = 0x44,
> +	[OFFSET_CLOCK_DIV] = 0x48,
> +	[OFFSET_SOFTRESET] = 0x50,
> +	[OFFSET_MULTI_DMA] = 0x8c,
> +	[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
> +	[OFFSET_DEBUGSTAT] = 0xe4,
> +	[OFFSET_DEBUGCTRL] = 0xe8,
> +	[OFFSET_FIFO_STAT] = 0xf4,
> +	[OFFSET_FIFO_THRESH] = 0xf8,
> +	[OFFSET_DCM_EN] = 0xf88,
> +};
> +
>   struct mtk_i2c_compatible {
>   	const struct i2c_adapter_quirks *quirks;
>   	const u16 *regs;
> @@ -442,6 +471,19 @@ static const struct mtk_i2c_compatible mt8186_compat = {
>   	.max_dma_support = 36,
>   };
>   
> +static const struct mtk_i2c_compatible mt8188_compat = {
> +	.regs = mt_i2c_regs_v3,
> +	.pmic_i2c = 0,
> +	.dcm = 0,
> +	.auto_restart = 1,
> +	.aux_len_reg = 1,
> +	.timing_adjust = 1,
> +	.dma_sync = 0,
> +	.ltiming_adjust = 1,
> +	.apdma_sync = 1,
> +	.max_dma_support = 36,
> +};
> +
>   static const struct mtk_i2c_compatible mt8192_compat = {
>   	.quirks = &mt8183_i2c_quirks,
>   	.regs = mt_i2c_regs_v2,
> @@ -465,6 +507,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
>   	{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
>   	{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
>   	{ .compatible = "mediatek,mt8186-i2c", .data = &mt8186_compat },
> +	{ .compatible = "mediatek,mt8188-i2c", .data = &mt8188_compat },
>   	{ .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat },
>   	{}
>   };