Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled

["Liu Kimriver/刘金河" <kimriver.liu@siengine.com>]

Hi Andi
 I am sorry for not replying to questions in time, when I left the office early on Friday.
 I sincerely apologize to you again.

I will improve my response progress and follow Andy's suggestion. Thanks.
And will resend new patch V7 on Moday:
[PATCH V7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled

-----邮件原件-----
发件人: Andi Shyti <andi.shyti@kernel.org> 
发送时间: 2024年9月7日 5:35
收件人: Liu Kimriver/刘金河 <kimriver.liu@siengine.com>
抄送: jarkko.nikula@linux.intel.com; andriy.shevchenko@linux.intel.com; mika.westerberg@linux.intel.com; jsd@semihalf.com; linux-i2c@vger.kernel.org; linux-kernel@vger.kernel.org
主题: Re: [PATCH] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled

Hi Kimriver,

...

> diff --git a/drivers/i2c/busses/i2c-designware-common.c 
> b/drivers/i2c/busses/i2c-designware-common.c
> index e8a688d04aee..2b3398cd4382 100644
> --- a/drivers/i2c/busses/i2c-designware-common.c
> +++ b/drivers/i2c/busses/i2c-designware-common.c
> @@ -453,6 +453,17 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev)
>  
>  	abort_needed = raw_intr_stats & DW_IC_INTR_MST_ON_HOLD;
>  	if (abort_needed) {
> +		if (!(enable & DW_IC_ENABLE_ENABLE)) {
> +			regmap_write(dev->map, DW_IC_ENABLE, DW_IC_ENABLE_ENABLE);

>BTW, your patch doesn't compile. Please make sure that you have everything in place and please resend.

>This time I expect you to follow Andy's suggestion.

Sorry, I forget to merge DW_IC_ENABLE_ENABLE patch to here. I will update V7 patch on Monday,
[PATCH V7] i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
I will update V7 patch on Monday which includes the following issues:
-------
V6->V7:
	1. add Subject versioning
	2. change fsleep(25) to usleep_range(25, 250)
	3. Add macro definition DW_iC_ENABLE_ENABLE for compiling error
------------------
Best Regards
Kimriver Liu