public inbox for linux-i2c@vger.kernel.org
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Jean Delvare <jdelvare@suse.com>, Andi Shyti <andi.shyti@kernel.org>
Cc: "linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>
Subject: [PATCH] i2c: i801: add helper i801_restore_regs
Date: Mon, 18 Sep 2023 13:57:01 +0200	[thread overview]
Message-ID: <94271a34-dbf5-440a-9f53-dc27b8384812@gmail.com> (raw)

In few places relevant registers are reset to their initial value on
driver load. Factor this out to new helper i801_restore_regs to avoid
code duplication.
Even though no actual problems are known, this patch may contribute
to avoiding potential issues by:
- restoring register values also in the error path of i2c_add_adapter
- making restoring registers the last step (especially in i801_remove)

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
This patch is a reworked version of a part of previously discussed patch
"i2c: i801: fix cleanup code in remove() and error path of probe()".
---
 drivers/i2c/busses/i2c-i801.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9bd712eaf..811541797 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -1629,6 +1629,12 @@ static void i801_setup_hstcfg(struct i801_priv *priv)
 	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hstcfg);
 }
 
+static void i801_restore_regs(struct i801_priv *priv)
+{
+	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+}
+
 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	int err, i;
@@ -1755,6 +1761,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (err) {
 		platform_device_unregister(priv->tco_pdev);
 		i801_acpi_remove(priv);
+		i801_restore_regs(priv);
 		return err;
 	}
 
@@ -1779,12 +1786,10 @@ static void i801_remove(struct pci_dev *dev)
 {
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
 	i801_del_mux(priv);
 	i2c_del_adapter(&priv->adapter);
 	i801_acpi_remove(priv);
-	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 
 	platform_device_unregister(priv->tco_pdev);
 
@@ -1792,6 +1797,8 @@ static void i801_remove(struct pci_dev *dev)
 	if (!priv->acpi_reserved)
 		pm_runtime_get_noresume(&dev->dev);
 
+	i801_restore_regs(priv);
+
 	/*
 	 * do not call pci_disable_device(dev) since it can cause hard hangs on
 	 * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
@@ -1802,18 +1809,17 @@ static void i801_shutdown(struct pci_dev *dev)
 {
 	struct i801_priv *priv = pci_get_drvdata(dev);
 
-	/* Restore config registers to avoid hard hang on some systems */
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
 	i801_disable_host_notify(priv);
-	pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
+	/* Restore config registers to avoid hard hang on some systems */
+	i801_restore_regs(priv);
 }
 
 static int i801_suspend(struct device *dev)
 {
 	struct i801_priv *priv = dev_get_drvdata(dev);
 
-	outb_p(priv->original_hstcnt, SMBHSTCNT(priv));
-	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
+	i801_restore_regs(priv);
+
 	return 0;
 }
 
-- 
2.42.0


             reply	other threads:[~2023-09-18 11:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-18 11:57 Heiner Kallweit [this message]
2023-09-19 15:50 ` [PATCH] i2c: i801: add helper i801_restore_regs Jean Delvare
2023-09-19 16:34 ` Andi Shyti
2023-09-19 19:53 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=94271a34-dbf5-440a-9f53-dc27b8384812@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andi.shyti@kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-i2c@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox