From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH v3 07/11] staging: typec: fusb302: Export current-limit through a power_supply class dev Date: Wed, 30 Aug 2017 07:01:38 -0700 Message-ID: <9e20e69b-2e9d-cada-a6a6-609fe7644479@roeck-us.net> References: <20170830094814.17758-1-hdegoede@redhat.com> <20170830094814.17758-8-hdegoede@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Return-path: Received: from bh-25.webhostbox.net ([208.91.199.152]:38335 "EHLO bh-25.webhostbox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751317AbdH3OEN (ORCPT ); Wed, 30 Aug 2017 10:04:13 -0400 In-Reply-To: <20170830094814.17758-8-hdegoede@redhat.com> Content-Language: en-US Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: Hans de Goede , Darren Hart , Andy Shevchenko , Wolfram Sang , Sebastian Reichel , Greg Kroah-Hartman , Heikki Krogerus Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Liam Breck , Tony Lindgren , linux-pm@vger.kernel.org, devel@driverdev.osuosl.org, "Yueyao (Nathan) Zhu" On 08/30/2017 02:48 AM, Hans de Goede wrote: > The fusb302 Type-C port-controller cannot control the current-limit > directly, so we need to exported the limit so that another driver > (e.g. the charger driver) can pick the limit up and configure the > system accordingly. > > The power-supply subsys already provides infrastructure for this, > power-supply devices have the notion of being supplied by another > power-supply and have properties through which we can export the > current-limit. > > Register a power_supply and export the current-limit through the > power_supply's current-max property. > > Cc: "Yueyao (Nathan) Zhu" > Signed-off-by: Hans de Goede Reviewed-by: Guenter Roeck > --- > Changes in v2: > -Put the psy class device code directly in fusb302.c rather then introducing > helpers which are only used by fusb302.c > -Add an online property to the psy so that upower does not mistake it for a > second battery in the system > --- > drivers/staging/typec/fusb302/Kconfig | 2 +- > drivers/staging/typec/fusb302/fusb302.c | 63 +++++++++++++++++++++++++++++++-- > 2 files changed, 62 insertions(+), 3 deletions(-) > > diff --git a/drivers/staging/typec/fusb302/Kconfig b/drivers/staging/typec/fusb302/Kconfig > index fce099ff39fe..48a4f2fcee03 100644 > --- a/drivers/staging/typec/fusb302/Kconfig > +++ b/drivers/staging/typec/fusb302/Kconfig > @@ -1,6 +1,6 @@ > config TYPEC_FUSB302 > tristate "Fairchild FUSB302 Type-C chip driver" > - depends on I2C > + depends on I2C && POWER_SUPPLY > help > The Fairchild FUSB302 Type-C chip driver that works with > Type-C Port Controller Manager to provide USB PD and USB > diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c > index 6f007f66d597..cf6355f59cd9 100644 > --- a/drivers/staging/typec/fusb302/fusb302.c > +++ b/drivers/staging/typec/fusb302/fusb302.c > @@ -28,6 +28,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -108,6 +109,11 @@ struct fusb302_chip { > /* lock for sharing chip states */ > struct mutex lock; > > + /* psy + psy status */ > + struct power_supply *psy; > + u32 current_limit; > + u32 supply_voltage; > + > /* chip status */ > enum toggling_mode toggling_mode; > enum src_current_status src_current_status; > @@ -876,11 +882,13 @@ static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge) > chip->vbus_on = on; > fusb302_log(chip, "vbus := %s", on ? "On" : "Off"); > } > - if (chip->charge_on == charge) > + if (chip->charge_on == charge) { > fusb302_log(chip, "charge is already %s", > charge ? "On" : "Off"); > - else > + } else { > chip->charge_on = charge; > + power_supply_changed(chip->psy); > + } > > done: > mutex_unlock(&chip->lock); > @@ -896,6 +904,11 @@ static int tcpm_set_current_limit(struct tcpc_dev *dev, u32 max_ma, u32 mv) > fusb302_log(chip, "current limit: %d ma, %d mv (not implemented)", > max_ma, mv); > > + chip->supply_voltage = mv; > + chip->current_limit = max_ma; > + > + power_supply_changed(chip->psy); > + > return 0; > } > > @@ -1681,6 +1694,43 @@ static irqreturn_t fusb302_irq_intn(int irq, void *dev_id) > return IRQ_HANDLED; > } > > +static int fusb302_psy_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct fusb302_chip *chip = power_supply_get_drvdata(psy); > + > + switch (psp) { > + case POWER_SUPPLY_PROP_ONLINE: > + val->intval = chip->charge_on; > + break; > + case POWER_SUPPLY_PROP_VOLTAGE_NOW: > + val->intval = chip->supply_voltage * 1000; /* mV -> µV */ > + break; > + case POWER_SUPPLY_PROP_CURRENT_MAX: > + val->intval = chip->current_limit * 1000; /* mA -> µA */ > + break; > + default: > + return -ENODATA; > + } > + > + return 0; > +} > + > +static enum power_supply_property fusb302_psy_properties[] = { > + POWER_SUPPLY_PROP_ONLINE, > + POWER_SUPPLY_PROP_VOLTAGE_NOW, > + POWER_SUPPLY_PROP_CURRENT_MAX, > +}; > + > +const struct power_supply_desc fusb302_psy_desc = { > + .name = "fusb302-typec-source", > + .type = POWER_SUPPLY_TYPE_USB_TYPE_C, > + .properties = fusb302_psy_properties, > + .num_properties = ARRAY_SIZE(fusb302_psy_properties), > + .get_property = fusb302_psy_get_property, > +}; > + > static int init_gpio(struct fusb302_chip *chip) > { > struct device_node *node; > @@ -1720,6 +1770,7 @@ static int fusb302_probe(struct i2c_client *client, > struct fusb302_chip *chip; > struct i2c_adapter *adapter; > struct device *dev = &client->dev; > + struct power_supply_config cfg = {}; > const char *name; > int ret = 0; > u32 v; > @@ -1766,6 +1817,14 @@ static int fusb302_probe(struct i2c_client *client, > return -EPROBE_DEFER; > } > > + cfg.drv_data = chip; > + chip->psy = devm_power_supply_register(dev, &fusb302_psy_desc, &cfg); > + if (IS_ERR(chip->psy)) { > + ret = PTR_ERR(chip->psy); > + dev_err(chip->dev, "Error registering power-supply: %d\n", ret); > + return ret; > + } > + > ret = fusb302_debugfs_init(chip); > if (ret < 0) > return ret; >