From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jon Smirl" Subject: Re: [PATCH] Convert pfc8563 i2c driver from old style to new style Date: Tue, 19 Feb 2008 10:17:43 -0500 Message-ID: <9e4733910802190717g3a4b6ddejbd180a32d7dfae47@mail.gmail.com> References: <20080121200901.15517.30253.stgit@terra.home> <20080219161020.61f7ec10@hyperion.delvare> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20080219161020.61f7ec10-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org> Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jean Delvare Cc: linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, Alessandro Zummo , i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org, Clemens Koller List-Id: linux-i2c@vger.kernel.org On 2/19/08, Jean Delvare wrote: > Hi Jon, > > On Mon, 21 Jan 2008 15:09:01 -0500, Jon Smirl wrote: > > Convert pfc8563 i2c driver from old style to new style. Let's just forget about this patch until the dynamic module loading support goes into the base. The Phytec PCM030 mpc5200 board uses this chip. They are staying out of tree because they've integrated real-time support which is not in mainline yet. -- Jon Smirl jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c