messages from 2023-08-16 10:08:53 to 2023-08-28 07:26:21 UTC [more...]
[PATCH v2 0/2] i2c: add support for Zhaoxin I2C controller
2023-08-28 7:25 UTC (9+ messages)
` [PATCH v2 1/2] i2c: wmt: split out i2c-viai2c-common.{c,h}
` [PATCH v2 2/2] i2c: add support for Zhaoxin I2C controller
[PATCH 0/4] i2c: i801: next set of improvements
2023-08-28 7:01 UTC (12+ messages)
` [PATCH 1/4] i2c: i801: Use i2c_mark_adapter_suspended/resumed
` [PATCH 2/4] i2c: i801: Replace acpi_lock with I2C bus lock
` [PATCH 3/4] i2c: i801: Improve i801_block_transaction_byte_by_byte
[PATCH] i2c: i801: fix cleanup code in remove() and error path of probe()
2023-08-27 20:26 UTC
[PATCH v2 5/8] I2C: ali15x3: Do PCI error checks on own line
2023-08-27 13:37 UTC
[PATCH] i2c: mt65xx: allow optional pmic clock
2023-08-27 2:13 UTC
[PATCH v10 0/4] Add Intel LJCA device driver
2023-08-26 23:14 UTC (5+ messages)
` [PATCH v10 1/4] usb: Add support for Intel LJCA device
` [PATCH v10 2/4] i2c: Add support for Intel LJCA USB I2C driver
` [PATCH v10 3/4] spi: Add support for Intel LJCA USB SPI driver
` [PATCH v10 4/4] gpio: update Intel LJCA USB GPIO driver
[PATCH] i2c: pxa: fix clang -Wvoid-pointer-to-enum-cast warning
2023-08-25 22:59 UTC (5+ messages)
[PATCH] i2c: Make I2C_ATR invisible
2023-08-25 21:16 UTC (4+ messages)
[PATCH 0/4] i2c: devm_pinctrl_get() usage fixes
2023-08-25 21:11 UTC (7+ messages)
` [PATCH 1/4] i2c: mv64xxx: devm_pinctrl_get() cannot return NULL
` [PATCH 2/4] i2c: at91-master: "
` [PATCH 3/4] i2c: i2c-cadence: Reset pinctrl to NULL in case devm_pinctrl_get() fails
` [PATCH 4/4] i2c: imx: devm_pinctrl_get() cannot return NULL
[PATCH -next v3] I2C: Make return value check more accurate and explicit for devm_pinctrl_get()
2023-08-25 21:07 UTC (4+ messages)
[PATCH v6] i2c: designware: Add support for recovery when GPIO need pinctrl
2023-08-25 20:26 UTC (5+ messages)
[PATCH i2c-next 0/2] i2c: mlxcpld: Extend driver functionality and allow to run on ARM64
2023-08-25 20:13 UTC (5+ messages)
` [PATCH i2c-next 1/2] i2c: mlxcpld: Allow driver to run on ARM64 architecture
` [PATCH i2c-next 2/2] i2c: mlxcpld: Add support for extended transaction length
[PATCH next] i2c: qcom-cci: Fix error checking in cci_probe()
2023-08-25 20:07 UTC (4+ messages)
[PATCH RESEND] i2c: at91: Use dev_err_probe() instead of dev_err()
2023-08-25 14:32 UTC
[PATCH] i2c: at91: Use dev_err_probe() instead of dev_err()
2023-08-25 14:28 UTC (2+ messages)
[PATCH 07/14] I2C: ali15x3: Do PCI error checks on own line
2023-08-25 8:34 UTC (7+ messages)
` [PATCH 08/14] I2C: nforce2: Do PCI error check "
` [PATCH 09/14] I2C: sis5595: Do PCI error checks "
Prezentacja
2023-08-25 8:15 UTC
[PATCH] i2c: iproc: handle invalid slave state
2023-08-24 21:23 UTC
[PATCH] dt-bindings: Drop remaining unneeded quotes
2023-08-24 20:24 UTC (12+ messages)
[RFC] i2c: whether need create *-common.{c,h} for i801 piix4 viapro driver
2023-08-24 16:57 UTC (2+ messages)
[PATCH 0/8] i2c: sprd: Modification of UNIOC Platform IIC Driver
2023-08-24 16:44 UTC (12+ messages)
` [PATCH 1/8] i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
` [PATCH 2/8] i2c: sprd: Add I2C driver to use 'reset framework' function
` [PATCH 3/8] i2c: sprd: Use global variables to record IIC ack/nack status instead of local variables
` [PATCH 4/8] i2c: sprd: Add IIC controller driver to support dynamic switching of 400K/1M/3.4M frequency
` [PATCH 5/8] i2c: sprd: Configure the enable bit of the IIC controller before each transmission initiation
` [PATCH 6/8] i2c: sprd: Add additional IIC control bit configuration to adapt to the new IP version of the UNISOC platform
` [PATCH 7/8] i2c: sprd: Set I2C_RX_ACK when clear irq
` [PATCH 8/8] i2c: sprd: Increase the waiting time for IIC transmission to avoid system crash issues
[PATCH v10] i2c: Add support for Intel LJCA USB I2C driver
2023-08-24 12:26 UTC (4+ messages)
[PATCH v9 0/4] Add Intel LJCA device driver
2023-08-24 0:54 UTC (11+ messages)
` [PATCH v9 1/4] usb: Add support for Intel LJCA device
` [PATCH v9 2/4] i2c: Add support for Intel LJCA USB I2C driver
` [PATCH v9 3/4] spi: Add support for Intel LJCA USB SPI driver
` [PATCH v9 4/4] gpio: update Intel LJCA USB GPIO driver
[PATCH] i2c: cadence: Fix the kernel-doc warnings
2023-08-23 21:30 UTC (3+ messages)
[PATCH v2] media: dt-bindings: Convert Omnivision OV7251 to DT schema
2023-08-23 21:28 UTC (2+ messages)
[PATCH v15 0/4] Add support for Maxim MAX735x/MAX736x variants
2023-08-23 21:21 UTC (17+ messages)
` [PATCH v15 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
` [PATCH v15 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
` [PATCH v15 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
` [PATCH v15 4/4] i2c: muxes: pca954x: Add regulator support
[PATCH i2c-mux-next v2 0/1] mux: Add regmap based mux driver
2023-08-23 15:53 UTC (2+ messages)
` [PATCH i2c-mux-next v2 1/1] i2c: mux: Add register map "
[PATCH i2c-mux-next 0/1] mux: Add regmap based mux driver
2023-08-23 15:00 UTC (3+ messages)
` [PATCH i2c-mux-next 1/1] i2c: mux: Add register map "
[PATCH v2] i2c: designware: add support for pinctrl for recovery
2023-08-23 14:43 UTC (7+ messages)
[v16 0/4] Add support for Maxim MAX735x/MAX736x variants
2023-08-23 14:16 UTC (9+ messages)
` [v16 1/4] dt-bindings: i2c: pca954x: Correct interrupt support
` [v16 2/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
` [v16 3/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
` [v16 4/4] i2c: muxes: pca954x: Add regulator support
[PATCH v5] i2c: designware: Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
2023-08-22 14:31 UTC (3+ messages)
[PATCH v4] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPI
2023-08-22 14:27 UTC (5+ messages)
[PATCH v3] Currently if the SoC needs pinctrl to switch the SCL and SDA from the I2C function to GPIO function, the recovery won't work
2023-08-22 12:18 UTC (5+ messages)
[PATCH v3] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
2023-08-22 10:28 UTC (3+ messages)
[PATCH v2] i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low
2023-08-22 9:04 UTC (3+ messages)
[PATCH 0/9] Use dev_err_probe in i2c probe function
2023-08-21 23:08 UTC (5+ messages)
` [PATCH 5/9] i2c: qcom-cci: Use dev_err_probe in "
W sprawie samochodu
2023-08-21 7:51 UTC
[PATCH -next v2 RESEND] I2C: Fix return value check for devm_pinctrl_get()
2023-08-21 2:56 UTC (7+ messages)
[PULL REQUEST] i2c-for-6.5-rc7
2023-08-19 17:30 UTC (2+ messages)
Pytanie o samochód
2023-08-18 8:15 UTC
[PATCH -next v2] I2C: Fix return value check for devm_pinctrl_get()
2023-08-18 7:27 UTC (11+ messages)
[PATCH 1/2] i2c: designware: fix __i2c_dw_disable in case master is holding SCL low
2023-08-17 15:51 UTC (7+ messages)
` [PATCH 2/2] i2c: designware: abort the transfer if receiving byte count of 0
[PATCH] i2c: Drop legacy callback .probe_new()
2023-08-17 11:29 UTC (2+ messages)
[PATCH -next] I2C: Use helper function IS_ERR_OR_NULL()
2023-08-17 1:39 UTC (8+ messages)
[PATCH] i2c:octeon:Add block-mode r/w
2023-08-16 23:07 UTC (2+ messages)
[PATCH -next RESEND] I2C: Use helper function IS_ERR_OR_NULL()
2023-08-16 10:23 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox