messages from 2026-08-17 18:06:19 to 2026-08-18 23:18:04 UTC [more...]
[PATCH] i2c: qcom-cci: fix device_node refcount leak in cci_probe()/cci_remove()
2026-08-18 23:18 UTC (4+ messages)
` [PATCH v2] "
[PATCH net-next v5 0/7] ptp: ocp: Add R4006 and V9 I2C peripheral support
2026-08-18 18:12 UTC (7+ messages)
` [PATCH net-next v5 1/7] dt-bindings: leds: Add IS32FL3207 controller
[PATCH net-next v5 7/7] ptp: ocp: Add Time Card V9 I2C peripheral topology
2026-08-18 16:57 UTC (2+ messages)
[PATCH net-next v5 6/7] ptp: ocp: Add R4006 I2C peripheral topology
2026-08-18 16:57 UTC (2+ messages)
[PATCH net-next v5 5/7] ptp: ocp: Add profile-driven I2C topology support
2026-08-18 16:57 UTC (2+ messages)
[PATCH net-next v5 4/7] ptp: ocp: Track EEPROM fields independently
2026-08-18 16:57 UTC (2+ messages)
[PATCH net-next v5 3/7] i2c: mux: Propagate software nodes to channel adapters
2026-08-18 16:57 UTC (2+ messages)
[PATCH net-next v5 2/7] leds: is32fl3207: Add controller driver
2026-08-18 16:57 UTC (2+ messages)
[PATCH v3] i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
2026-08-18 15:35 UTC
[PATCH] i2c: bcm2835: add missing braces to for loop in bcm2835_i2c_xfer
2026-08-18 14:58 UTC (2+ messages)
[PATCH] i2c: i2c-s3c2410: fix runtime PM cleanup
2026-08-18 14:52 UTC (2+ messages)
[RFC PATCH] i2c: designware: Enable SAR in slave mode for Multiple SAR controllers
2026-08-18 14:43 UTC (5+ messages)
` [PATCH v5] "
` [EXTERNAL] "
` [PATCH v6] "
[PATCH] i2c: i2c-rzv2m: fix runtime PM cleanup
2026-08-18 14:28 UTC (3+ messages)
[PATCH] i2c: cp2615: Validate read length before copying
2026-08-18 12:47 UTC
[PATCH] i2c: microchip-corei2c: disable clock after removing adapter
2026-08-18 12:41 UTC
[PATCH] i2c: axxia: disable clock after removing adapter in remove
2026-08-18 12:41 UTC
[PATCH] i2c: altera: disable clock after removing adapter
2026-08-18 12:41 UTC
[PATCH v4 0/5] i2c: qcom-cci: Enforce the required CCI clock rate
2026-08-18 12:16 UTC (11+ messages)
` [PATCH v4 1/5] i2c: qcom-cci: Switch msm8953 to the CCI v2 timing/rate config
` [PATCH v4 2/5] i2c: qcom-cci: Support per-mode CCI clock rates
` [PATCH v4 3/5] i2c: qcom-cci: Add 19.2 MHz timings for the v2 CCI
` [PATCH v4 4/5] i2c: qcom-cci: Share the timing table across CCI revisions
` [PATCH v4 5/5] i2c: qcom-cci: Enforce the required CCI clock rate
[PATCH] i2c: cp2615: handle allocation failure
2026-08-18 11:17 UTC (2+ messages)
` [PATCH v2] "
[PATCH v2 0/2] I2C SCL counter updates for Qualcomm IPQ5424 SoC
2026-08-18 10:58 UTC (4+ messages)
` [PATCH v2 1/2] i2c: qcom-geni: update frequency table to fix timing parameters
[PATCH v2] i2c: xiic: restore runtime PM teardown in remove to fix clk WARN flood
2026-08-18 10:16 UTC (6+ messages)
[PATCH] i2c: amd-mp2: fix autosuspend cleanup during teardown
2026-08-18 8:40 UTC (2+ messages)
[PATCH 0/2] i2c: qcom-geni: Quiesce hardware on shutdown and panic
2026-08-18 5:01 UTC (3+ messages)
` [PATCH 1/2] i2c: qcom-geni: Add shutdown callback to quiesce hardware on reboot
` [PATCH 2/2] i2c: qcom-geni: Add panic notifier to prevent transfers during panic
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).