From: Ben Dooks <ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>
To: ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org,
torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Please pull bjdooks' for-linus/i2c-3.2 branch
Date: Tue, 01 Nov 2011 00:58:03 +0000 [thread overview]
Message-ID: <E1RL2fz-0005r0-Ih@freya> (raw)
The following changes since commit 1fdb24e969110fafea36d3b393bea438f702c87f:
Merge branch 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm (2011-10-28 12:02:27 -0700)
are available in the git repository at:
git://git.fluff.org/bjdooks/linux.git for-linus/i2c-3.2
Andy Green (12):
I2C: OMAP2+: Name registers in I2C IP V2 only accordingly
I2C: OMAP: add rev to omap i2c platform data
I2C: OMAP1: set IP revision in platform data
I2C: OMAP2+: Pass hwmod rev knowledge via platform_data when i2c bus added
I2C: OMAP2+: use platform_data ip revision to select register map
I2C: OMAP2+: Solve array bounds overflow error on i2c idle
I2C: OMAP2+: address confused probed version naming
I2C: OMAP1/OMAP2+: add flags field to omap i2c platform data
I2C: OMAP2+: Pass flags up to omap i2c platform_data as well
I2C: OMAP1: set i2c unit feature implementation flags in platform data
I2C: OMAP2+: Convert omap I2C driver to use feature implementation flags from platform data
I2C: OMAP1/OMAP2+: prepend I2C IP version to probed version shown in dev_info
Ben Dooks (3):
Merge branches 'for-32/i2c/omap-v4', 'for-32/i2c/imx-dt', 'for-32/i2c/eg20t-v4', 'for-32/i2c/designware-v5' and 'for-32/i2c/au1550' into for-linus/i2c-3.2
Merge branch 'for-32/i2c/irqflags' into for-linus/i2c-3.2
Merge branches 'for-32/i2c/nomadik', 'for-32/i2c/s3c2410-dt' and 'for-32/i2c/tegra-iomem' into for-linus/i2c-3.2
Dirk Brandewie (9):
i2c-designware: Move checking of IP core version to i2c_dw_init()
i2c-designware: split of i2c-designware.c into core and bus specific parts
i2c-designware: Move retriveving the clock speed out of core code.
i2c-designware: move i2c functionality bit field to be adapter specific
i2c-designware: move controller config to bus specific portion of driver
i2c-designware: Support multiple cores using same ISR
i2c-designware: Push all register reads/writes into the core code.
i2c-designware: Add support for Designware core behind PCI devices.
i2c-designware: Add runtime power management support
Jean-Hugues Deschenes (3):
i2c-designware: Use local version of readl & writel
i2c-designware: Check component type register
i2c-designware: Allow mixed endianness accesses
Jonas Aaberg (1):
i2c-nomadik: cosmetic coding style corrections
Kevin Hilman (3):
I2C: OMAP: remove unneccesary use of pdev
I2C: OMAP: remove dev->idle, use usage counting provided by runtime PM
I2C: OMAP: remove unused function pointers from pdata
Manuel Lauss (4):
i2c-au1550: remove usage of volatile keyword
i2c-au1550: remove unused ack_timeout
i2c-au1550: increase timeout waiting for master done
i2c-au1550: dev_pm_ops conversion
Octavian Purdila (1):
i2c-designware: Fix PCI core warning on suspend/resume
Olof Johansson (1):
i2c-tegra: __iomem annotation fix
Shawn Guo (2):
i2c-imx: remove init/exit hooks from platform data
i2c-imx: add device tree probe support
Shubhrajyoti D (1):
OMAP4: I2C: Enable the wakeup in I2C_WE
Thomas Abraham (2):
i2c-s3c2410: Keep a copy of platform data and use it
i2c-s3c2410: Add device tree support
Tomoya MORINAGA (7):
i2c-eg20t: Fix bus-idle waiting issue
i2c-eg20t: Modify returned value s32 to long
i2c-eg20t: Fix 10bit access issue
i2c-eg20t: Separate error processing
i2c-eg20t: add stop sequence in case wait-event timeout occurs
i2c-eg20t: Fix flag setting issue
i2c-eg20t: Add initialize processing in case i2c-error occurs
Yong Zhang (1):
i2c: irq: Remove IRQF_DISABLED
.../devicetree/bindings/i2c/fsl-imx-i2c.txt | 25 ++
.../devicetree/bindings/i2c/samsung-i2c.txt | 39 ++
arch/arm/plat-mxc/include/mach/i2c.h | 4 -
arch/arm/plat-omap/i2c.c | 27 ++
arch/mips/include/asm/mach-au1x00/au1xxx_psc.h | 13 -
drivers/i2c/busses/Kconfig | 16 +-
drivers/i2c/busses/Makefile | 5 +-
drivers/i2c/busses/i2c-au1550.c | 280 ++++++---------
drivers/i2c/busses/i2c-bfin-twi.c | 4 +-
.../{i2c-designware.c => i2c-designware-core.c} | 382 ++++++-------------
drivers/i2c/busses/i2c-designware-core.h | 105 ++++++
drivers/i2c/busses/i2c-designware-pcidrv.c | 392 ++++++++++++++++++++
drivers/i2c/busses/i2c-designware-platdrv.c | 215 +++++++++++
drivers/i2c/busses/i2c-eg20t.c | 270 ++++++++++----
drivers/i2c/busses/i2c-highlander.c | 2 +-
drivers/i2c/busses/i2c-imx.c | 46 ++--
drivers/i2c/busses/i2c-nomadik.c | 91 +++---
drivers/i2c/busses/i2c-nuc900.c | 2 +-
drivers/i2c/busses/i2c-omap.c | 164 +++++----
drivers/i2c/busses/i2c-pmcmsp.c | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 130 ++++++-
drivers/i2c/busses/i2c-sh7760.c | 2 +-
drivers/i2c/busses/i2c-sh_mobile.c | 2 +-
drivers/i2c/busses/i2c-stu300.c | 2 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
include/linux/i2c-omap.h | 5 +-
26 files changed, 1543 insertions(+), 684 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/fsl-imx-i2c.txt
create mode 100644 Documentation/devicetree/bindings/i2c/samsung-i2c.txt
rename drivers/i2c/busses/{i2c-designware.c => i2c-designware-core.c} (65%)
create mode 100644 drivers/i2c/busses/i2c-designware-core.h
create mode 100644 drivers/i2c/busses/i2c-designware-pcidrv.c
create mode 100644 drivers/i2c/busses/i2c-designware-platdrv.c
reply other threads:[~2011-11-01 0:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1RL2fz-0005r0-Ih@freya \
--to=ben-linux-elnmno+kys3ytjvyw6ydsg@public.gmane.org \
--cc=ben-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=torvalds-de/tnXTf+JLsfHDXvbKv3WD2FQJk+8+b@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox