Re: [PATCH] i2c: meson: Fix wrong speed use from probe

Neil Armstrong
2022-03-07T08:46:51Z

On 01/03/2022 08:26, Lucas Tanure wrote:
> Having meson_i2c_set_clk_div after i2c_add_adapter
> causes issues for client drivers that try to use
> the bus before the requested speed is applied.
>
> The bus can be used just after i2c_add_adapter, so
> move i2c_add_adapter to the final step as
> meson_i2c_set_clk_div needs to be called before
> the bus is used.
>
> Signed-off-by: Lucas Tanure <tanure@linux.com>
> ---
> drivers/i2c/busses/i2c-meson.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
> index ef73a42577cc..07eb819072c4 100644
> --- a/drivers/i2c/busses/i2c-meson.c
> +++ b/drivers/i2c/busses/i2c-meson.c
> @@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev)
> */
> meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
>
> - ret = i2c_add_adapter(&i2c->adap);
> - if (ret < 0) {
> - clk_disable_unprepare(i2c->clk);
> - return ret;
> - }
> -
> /* Disable filtering */
> meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
> REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
>
> meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
>
> + ret = i2c_add_adapter(&i2c->adap);
> + if (ret < 0) {
> + clk_disable_unprepare(i2c->clk);
> + return ret;
> + }
> +
> return 0;
> }
>

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>