Re: [PATCH v7 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Mon, Sep 23, 2024 at 01:33:57PM +0530, Shyam Sundar S K wrote:
> The AMD ASF controller is presented to the operating system as an ACPI
> device. The AMD ASF driver can use ACPI to obtain information about the
> ASF controller's attributes, such as the ASF address space and interrupt
> number, and to handle ASF interrupts.
> 
> Currently, the piix4 driver assumes that a specific port address is
> designated for AUX operations. However, with the introduction of ASF, the
> same port address may also be used by the ASF controller. Therefore, a
> check needs to be added to ensure that if ASF is advertised and enabled in
> ACPI, the AUX port should not be configured.

...

> +static int amd_asf_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct amd_asf_dev *asf_dev;
> +
> +	asf_dev = devm_kzalloc(dev, sizeof(*asf_dev), GFP_KERNEL);
> +	if (!asf_dev)
> +		return dev_err_probe(dev, -ENOMEM, "Failed to allocate memory\n");
> +
> +	asf_dev->mmio_cfg.use_mmio = true;
> +	asf_dev->port_addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
> +	if (!asf_dev->port_addr)
> +		return dev_err_probe(dev, -EINVAL, "missing IO resources\n");
> +
> +	asf_dev->adap.owner = THIS_MODULE;

> +	asf_dev->adap.dev.parent = &pdev->dev;

Now can also be

	asf_dev->adap.dev.parent = dev;

(no need to resend for this only thing, perhaps Andi can amend whilst applying).

> +	i2c_set_adapdata(&asf_dev->adap, asf_dev);
> +	snprintf(asf_dev->adap.name, sizeof(asf_dev->adap.name), "AMD ASF adapter");
> +
> +	return devm_i2c_add_adapter(dev, &asf_dev->adap);
> +}

-- 
With Best Regards,
Andy Shevchenko