[PULL REQUEST] i2c-for-6.12-rc1-additional_fixes

[Wolfram Sang <wsa@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 2458 bytes --]

The following changes since commit 075dbe9f6e3c21596c5245826a4ee1f1c1676eb8:

  Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (2024-09-26 12:00:25 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git tags/i2c-for-6.12-rc1-additional_fixes

for you to fetch changes up to 26de8614d83f1f1a0b0b0a300e3be40a95b9a340:

  Merge tag 'i2c-host-fixes-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current (2024-09-27 18:57:38 +0200)

----------------------------------------------------------------
i2c-for-6.12-rc1-additional_fixes

I2C host fixes for v6.12-rc1 (from Andi)

The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.

In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.

The recent KEBA driver required a dependency fix in Kconfig.

The XIIC driver now has a corrected power suspend sequence.

----------------------------------------------------------------
Ard Biesheuvel (1):
      i2c: synquacer: Deal with optional PCLK correctly

Geert Uytterhoeven (1):
      i2c: keba: I2C_KEBA should depend on KEBA_CP500

Jinjie Ruan (1):
      i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled

Kimriver Liu (1):
      i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

Wolfram Sang (1):
      Merge tag 'i2c-host-fixes-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current


with much appreciated quality assurance from
----------------------------------------------------------------
Andy Shevchenko (1):
      (Rev.) i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

Gerhard Engleder (1):
      (Rev.) i2c: keba: I2C_KEBA should depend on KEBA_CP500

Mika Westerberg (1):
      (Rev.) i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled

 drivers/i2c/busses/Kconfig                 |  1 +
 drivers/i2c/busses/i2c-designware-common.c | 14 +++++++++++
 drivers/i2c/busses/i2c-designware-core.h   |  1 +
 drivers/i2c/busses/i2c-designware-master.c | 38 ++++++++++++++++++++++++++++++
 drivers/i2c/busses/i2c-synquacer.c         |  5 ++--
 drivers/i2c/busses/i2c-xiic.c              |  2 +-
 6 files changed, 58 insertions(+), 3 deletions(-)

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]