Re: [PATCH v1 1/2] i2c:busses:Register PCI1XXXX adapter to I2C subsystem

[Dmitry Osipenko <digetx@gmail.com>]

29.09.2021 09:22, LakshmiPraveen Kopparthi пишет:
> +static int pci1xxxx_i2c_suspend(struct device *dev)
> +{
> +	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +	u32 regval;
> +
> +	i2c_mark_adapter_suspended(&i2c->adap);
> +
> +	pci1xxxx_ack_high_level_intr(i2c, ALL_HIGH_LAYER_INTR);
> +	pci1xxxx_i2c_config_high_level_intr(i2c, ALL_HIGH_LAYER_INTR, false);
> +
> +	/*
> +	 * Enable the PERST_DIS bit to mask the PERST from
> +	 * resetting the core regs
> +	 */
> +	regval = readl(i2c->i2c_base + SMBUS_RESET_REG);
> +	regval |= PERI_SMBUS_D3_RESET_DIS;
> +	writel(regval, i2c->i2c_base + SMBUS_RESET_REG);
> +
> +	return 0;
> +}
> +
> +static int pci1xxxx_i2c_resume(struct device *dev)
> +{
> +	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +	u32 regval;
> +
> +	i2c_mark_adapter_resumed(&i2c->adap);
> +
> +	regval = readl(i2c->i2c_base + SMBUS_RESET_REG);
> +	regval &= ~PERI_SMBUS_D3_RESET_DIS;
> +	writel(regval, i2c->i2c_base + SMBUS_RESET_REG);
> +
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(pci1xxxx_i2c_pm_ops, pci1xxxx_i2c_suspend,
> +			 pci1xxxx_i2c_resume);

Can you move suspend/resume to NOIRQ level? Device drivers may require
to access I2C early on resume (or late on suspend), it's a common
trouble for bus drivers.