Re: [PATCH v6 2/3] i2c: tegra: Use internal reset when reset property is not available

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On Mon, Jul 14, 2025 at 10:52:25AM +0530, Akhil R wrote:
> On Fri, 11 Jul 2025 18:00:45 +0200, Andi Shyti wrote:

...

> >> I would perhaps expand the comment here to explain ENOENT check and what do we
> >> do in this case. (Note, no rewriting of the existing, just adding a paragraph)
> >> 
> >> 	*
> >> 	* In case ... we compare with -ENOENT ...
> >> 	* ...
> >> 	*/
> >
> > If you write it here I can expand your comment before merging.
> >
> > Or if you prefer sending a v7 is still fine.
> 
> Hi Andi,
> 
> I thought to update the comments as below. Please let me know if this can be
> folded in. I can send a v7 if that is easier to merge.
> 
> 	/*
> 	 * Reset the controller before initializing it.
> 	 * In case if device_reset() returns -ENOENT, i.e. when the reset is
> 	 * not available, the internal software reset will be used if it is
> 	 * supported by the controller.
> 	 */
> 	err = device_reset(i2c_dev->dev);
> 	if (err == -ENOENT)
> 		err = tegra_i2c_master_reset(i2c_dev);
> 
> 	/*
> 	 * The reset shouldn't ever fail in practice. The failure will be a
> 	 * sign of a severe problem that needs to be resolved. Still we don't
> 	 * want to fail the initialization completely because this may break
> 	 * kernel boot up since voltage regulators use I2C. Hence, we will
> 	 * emit a noisy warning on error, which won't stay unnoticed and
> 	 * won't hose machine entirely.
> 	 */
> 	WARN_ON_ONCE(err);

Good for me.

-- 
With Best Regards,
Andy Shevchenko