On Mon, Sep 15, 2025 at 02:53:23PM +0300, Svyatoslav Ryhel wrote:
> пн, 15 вер. 2025 р. о 14:35 Wolfram Sang
> <wsa+renesas@sang-engineering.com> пише:
> >
> > On Mon, Sep 15, 2025 at 09:01:36AM +0300, Svyatoslav Ryhel wrote:
> > > Implement driver for hot-plugged I2C busses, where some devices on
> > > a bus are hot-pluggable and their presence is indicated by GPIO line.
> > > This feature is used by the ASUS Transformers family, by the  Microsoft
> > > Surface RT/2 and maybe more.
> > >
> > > ASUS Transformers expose i2c line via proprietary 40 pin plug and wire
> > > that line through optional dock accessory. Devices in the dock are
> > > connected to this i2c line and docks presence is detected by a dedicted
> > > GPIO.
> > >
> > > Michał Mirosław (1):
> > >   i2c: muxes: Add GPIO-detected hotplug I2C
> > >
> > > Svyatoslav Ryhel (1):
> > >   dt-bindings: i2c: Document GPIO detected hot-plugged I2C bus
> > >
> > >  .../bindings/i2c/i2c-hotplug-gpio.yaml        |  65 +++++
> > >  drivers/i2c/muxes/Kconfig                     |  11 +
> > >  drivers/i2c/muxes/Makefile                    |   1 +
> > >  drivers/i2c/muxes/i2c-hotplug-gpio.c          | 263 ++++++++++++++++++
> > >  4 files changed, 340 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-hotplug-gpio.yaml
> > >  create mode 100644 drivers/i2c/muxes/i2c-hotplug-gpio.c
> >
> > Adding Herve and Luca to CC because they want to achieve the same with
> > their I2C bus extensions, no?

Sorry, a misunderstanding: the question was for Herve and Luca. I wanted
to ask for a comment from them if this is the same problem (which I
think it is). The question was not meant for you.