From: Aurelien Jarno <aurelien@aurel32.net>
To: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Cc: Andi Shyti <andi.shyti@kernel.org>, Yixun Lan <dlan@gentoo.org>,
Alex Elder <elder@riscstar.com>,
Michael Opdenacker <michael.opdenacker@rootcommit.com>,
Troy Mitchell <troymitchell988@gmail.com>,
linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-riscv@lists.infradead.org, spacemit@lists.linux.dev
Subject: Re: [PATCH v5 1/2] i2c: spacemit: replace i2c_xfer_msg()
Date: Mon, 29 Dec 2025 15:39:39 +0100 [thread overview]
Message-ID: <aVKSqx6J4HHfnBNX@aurel32.net> (raw)
In-Reply-To: <20251226-k1-i2c-atomic-v5-1-023c798c5523@linux.spacemit.com>
On 2025-12-26 11:31, Troy Mitchell wrote:
> The upcoming PIO support requires a wait_pio_xfer() helper, which is
> invoked from xfer_msg().
>
> Since wait_pio_xfer() depends on err_check(), move the definition of
> xfer_msg() after err_check() to avoid a forward declaration of
> err_check().
>
> Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
> ---
> drivers/i2c/busses/i2c-k1.c | 62 ++++++++++++++++++++++-----------------------
> 1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
> index d42c03ef5db5984ea8e06b3d7eb485b4f899e616..accef6653b56bd3505770328af17e441fad613a7 100644
> --- a/drivers/i2c/busses/i2c-k1.c
> +++ b/drivers/i2c/busses/i2c-k1.c
> @@ -304,37 +304,6 @@ static void spacemit_i2c_start(struct spacemit_i2c_dev *i2c)
> writel(val, i2c->base + SPACEMIT_ICR);
> }
>
> -static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c)
> -{
> - unsigned long time_left;
> - struct i2c_msg *msg;
> -
> - for (i2c->msg_idx = 0; i2c->msg_idx < i2c->msg_num; i2c->msg_idx++) {
> - msg = &i2c->msgs[i2c->msg_idx];
> - i2c->msg_buf = msg->buf;
> - i2c->unprocessed = msg->len;
> - i2c->status = 0;
> -
> - reinit_completion(&i2c->complete);
> -
> - spacemit_i2c_start(i2c);
> -
> - time_left = wait_for_completion_timeout(&i2c->complete,
> - i2c->adapt.timeout);
> - if (!time_left) {
> - dev_err(i2c->dev, "msg completion timeout\n");
> - spacemit_i2c_conditionally_reset_bus(i2c);
> - spacemit_i2c_reset(i2c);
> - return -ETIMEDOUT;
> - }
> -
> - if (i2c->status & SPACEMIT_SR_ERR)
> - return spacemit_i2c_handle_err(i2c);
> - }
> -
> - return 0;
> -}
> -
> static bool spacemit_i2c_is_last_msg(struct spacemit_i2c_dev *i2c)
> {
> if (i2c->msg_idx != i2c->msg_num - 1)
> @@ -418,6 +387,37 @@ static void spacemit_i2c_err_check(struct spacemit_i2c_dev *i2c)
> complete(&i2c->complete);
> }
>
> +static int spacemit_i2c_xfer_msg(struct spacemit_i2c_dev *i2c)
> +{
> + unsigned long time_left;
> + struct i2c_msg *msg;
> +
> + for (i2c->msg_idx = 0; i2c->msg_idx < i2c->msg_num; i2c->msg_idx++) {
> + msg = &i2c->msgs[i2c->msg_idx];
> + i2c->msg_buf = msg->buf;
> + i2c->unprocessed = msg->len;
> + i2c->status = 0;
> +
> + reinit_completion(&i2c->complete);
> +
> + spacemit_i2c_start(i2c);
> +
> + time_left = wait_for_completion_timeout(&i2c->complete,
> + i2c->adapt.timeout);
> + if (!time_left) {
> + dev_err(i2c->dev, "msg completion timeout\n");
> + spacemit_i2c_conditionally_reset_bus(i2c);
> + spacemit_i2c_reset(i2c);
> + return -ETIMEDOUT;
> + }
> +
> + if (i2c->status & SPACEMIT_SR_ERR)
> + return spacemit_i2c_handle_err(i2c);
> + }
> +
> + return 0;
> +}
> +
> static irqreturn_t spacemit_i2c_irq_handler(int irq, void *devid)
> {
> struct spacemit_i2c_dev *i2c = devid;
With the patch title updated as suggested:
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@aurel32.net http://aurel32.net
next prev parent reply other threads:[~2025-12-29 14:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-26 3:31 [PATCH v5 0/2] i2c: spacemit: introduce pio for k1 Troy Mitchell
2025-12-26 3:31 ` [PATCH v5 1/2] i2c: spacemit: replace i2c_xfer_msg() Troy Mitchell
2025-12-27 19:45 ` Andi Shyti
2025-12-28 10:31 ` Troy Mitchell
2025-12-28 23:24 ` Alex Elder
2025-12-29 14:39 ` Aurelien Jarno [this message]
2025-12-26 3:31 ` [PATCH v5 2/2] i2c: spacemit: introduce pio for k1 Troy Mitchell
2025-12-28 23:24 ` Alex Elder
2025-12-29 2:03 ` Troy Mitchell
2025-12-29 2:07 ` Troy Mitchell
2025-12-29 13:54 ` Aurelien Jarno
2025-12-29 15:07 ` Aurelien Jarno
2026-01-08 7:43 ` Troy Mitchell
2025-12-27 19:38 ` [PATCH v5 0/2] " Andi Shyti
2025-12-28 10:33 ` Troy Mitchell
2025-12-29 14:38 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aVKSqx6J4HHfnBNX@aurel32.net \
--to=aurelien@aurel32.net \
--cc=andi.shyti@kernel.org \
--cc=dlan@gentoo.org \
--cc=elder@riscstar.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=michael.opdenacker@rootcommit.com \
--cc=spacemit@lists.linux.dev \
--cc=troy.mitchell@linux.spacemit.com \
--cc=troymitchell988@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox