From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Maciej W. Rozycki" Subject: Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts Date: Tue, 7 Dec 2010 14:30:27 +0000 (GMT) Message-ID: References: <1291617494-18430-1-git-send-email-mattst88@gmail.com> <20101206173040.GA18372@ericsson.com> <20101207051438.GA20144@ericsson.com> Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Return-path: In-Reply-To: <20101207051438.GA20144-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Guenter Roeck Cc: Matt Turner , Jean Delvare , "linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org" , Ralf Baechle List-Id: linux-i2c@vger.kernel.org On Mon, 6 Dec 2010, Guenter Roeck wrote: > A quick look through sb1250 vs. sb1480 code shows that the 1480 uses different > interrupt numbers. The patch assigns the sb1250 interrupt numbers, so unless > I am missing something the code as written can not work for sb1480. That well could be -- I never had access to a BigSur board. The board-specific interrupt numbers should either be available from the board manual (I haven't checked if one has been released; I certainly have one for my SWARM) or quoted somewhere in our tree. Otherwise figuring them out by trial and error should be a trivial exercise for someone with actual hardware at hand. Maciej