Linux I2C development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Ruoyu Wang <ruoyuw560@gmail.com>
Cc: Andi Shyti <andi.shyti@kernel.org>, Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>, Marek Vasut <marex@denx.de>,
	Wolfram Sang <wsa@kernel.org>,
	linux-i2c@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] i2c: mxs: fix DMA channel leak on probe error
Date: Mon, 17 Aug 2026 10:57:32 -0500	[thread overview]
Message-ID: <aoMvbNkUFZR8hzr5@SMW015318> (raw)
In-Reply-To: <20260815151720.3757460-1-ruoyuw560@gmail.com>

On Sat, Aug 15, 2026 at 11:17:20PM +0800, Ruoyu Wang wrote:
> mxs_i2c_probe() requests an exclusive DMA channel before resetting the
> controller and registering the I2C adapter. If either later operation
> fails, probe returns without releasing the channel because the remove
> callback is not invoked after a failed probe.
>
> Use devm_dma_request_chan() so the device core releases the channel on
> probe failure and driver detach. Remove the manual release from the
> remove callback because the channel is now device-managed.
>
> This issue was found by a static analysis checker and confirmed by
> manual source review.
>
> Fixes: 62885f59a261 ("MXS: Implement DMA support into mxs-i2c")
> Assisted-by: unnamed:claude-opus-4.8 typestate
> Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> Changes in v2:
> - Use devm_dma_request_chan() instead of explicit error unwinding.
> - Remove the now-redundant manual release in remove().
> - Add the Assisted-by tag.
>
> v1: https://lore.kernel.org/r/20260814134033.1386874-1-ruoyuw560@gmail.com/
> ---
>  drivers/i2c/busses/i2c-mxs.c | 5 +----
>  1 file changed, 1 insertion(+), 4 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
> index 4e07babea9c3f4..eee4fdcd9df31a 100644
> --- a/drivers/i2c/busses/i2c-mxs.c
> +++ b/drivers/i2c/busses/i2c-mxs.c
> @@ -839,7 +839,7 @@ static int mxs_i2c_probe(struct platform_device *pdev)
>  	}
>
>  	/* Setup the DMA */
> -	i2c->dmach = dma_request_chan(dev, "rx-tx");
> +	i2c->dmach = devm_dma_request_chan(dev, "rx-tx");
>  	if (IS_ERR(i2c->dmach)) {
>  		return dev_err_probe(dev, PTR_ERR(i2c->dmach),
>  				     "Failed to request dma\n");
> @@ -877,9 +877,6 @@ static void mxs_i2c_remove(struct platform_device *pdev)
>
>  	i2c_del_adapter(&i2c->adapter);
>
> -	if (i2c->dmach)
> -		dma_release_channel(i2c->dmach);
> -
>  	writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET);
>  }
>
> --
> 2.51.0
>
>

  reply	other threads:[~2026-08-17 15:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-15 15:17 [PATCH v2] i2c: mxs: fix DMA channel leak on probe error Ruoyu Wang
2026-08-17 15:57 ` Frank Li [this message]
2026-08-19  7:00 ` Andi Shyti

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aoMvbNkUFZR8hzr5@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=andi.shyti@kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=ruoyuw560@gmail.com \
    --cc=s.hauer@pengutronix.de \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox