Re: [PATCH v2 0/2] i2c: designware: add i2c gpio recovery option

[Phil Reid <preid@electromag.com.au>]

On 16/06/2017 15:42, Phil Reid wrote:
> Changes from V1:
> - In review Andy suggested change the i2c core to use the gpiod
>    I've added a patch that allows the gradual switching of drivers
>    to using gpiod interface. The old interface is preserved so
>    that changes can be made incrementally.
> - I've update Tim's patch for the designware driver to use the new
>    interface. Tweaked a couple of things to his patch and fixed
>    up things Andy id in last review.
>    The core changes in p1 don't require the get/set scl/sda functions.
>    Hopefully I've done the right thing with preserving authorship and
>    signoff.
> 
> Phil Reid (1):
>    i2c: Switch to using gpiod interface for gpio bus recovery
> 
> Tim Sander (1):
>    i2c: designware: add i2c gpio recovery option
> 
>   drivers/i2c/busses/i2c-designware-core.c    | 12 ++++--
>   drivers/i2c/busses/i2c-designware-core.h    |  1 +
>   drivers/i2c/busses/i2c-designware-platdrv.c | 58 +++++++++++++++++++++++++++++
>   drivers/i2c/i2c-core-base.c                 | 22 +++++++++--
>   include/linux/i2c.h                         |  2 +
>   5 files changed, 88 insertions(+), 7 deletions(-)
> 

Ping:

Any comments on these 2 patches?



-- 
Regards
Phil Reid