Re: [PATCH 06/21] include: dt-binding: clock: add adi clock header file

["Arnd Bergmann" <arnd@arndb.de>]

On Thu, Sep 12, 2024, at 18:24, Arturs Artamonovs via B4 Relay wrote:
> From: Arturs Artamonovs <arturs.artamonovs@analog.com>
>
> Add adi clock driver header file

Are you sure this is necessary? If the clk controller follows
a logical structure, it's usually easier to identify individual
clks by the way the hardware is laid out.

> +#ifndef DT_BINDINGS_CLOCK_ADI_SC5XX_CLOCK_H
> +#define DT_BINDINGS_CLOCK_ADI_SC5XX_CLOCK_H
> +
> +#define ADSP_SC598_CLK_DUMMY 0
> +#define ADSP_SC598_CLK_SYS_CLKIN0 1
> +#define ADSP_SC598_CLK_SYS_CLKIN1 2
> +#define ADSP_SC598_CLK_CGU0_PLL_IN 3
> +#define ADSP_SC598_CLK_CGU0_VCO_OUT 4

Unlike the DT compatible strings, these #defines don't have
to be specific to a particular SoC, you could just reuse them
for a family of chips even if they each use a slightly different
subset. Maybe name them "ADSP_CLK_*" or "ADSP_SC5XX_CLK_*"?

> +#define ADSP_SC598_CLK_END 80

This should not be part of the binding, in particular you
probably want to be able to extend this in order to support
additional chips.

      Arnd