From: "Matwey V. Kornilov" <matwey.kornilov@gmail.com>
To: frank zago <frank@zago.net>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Wolfram Sang <wsa@kernel.org>, Johan Hovold <johan@kernel.org>,
linux-usb@vger.kernel.org, Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org
Subject: Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
Date: Fri, 8 Nov 2024 18:58:07 +0300 [thread overview]
Message-ID: <cf32d676-831c-4c3f-8965-c9be3abd5300@gmail.com> (raw)
In-Reply-To: <20220616013747.126051-1-frank@zago.net>
Hi Frank,
Are you going to further proceed with this patch set? As far as I can
see, there were no updates since 2022.
16.06.2022 04:37, frank zago пишет:
> The CH341 is a multifunction chip, presenting 3 different USB PID. One
> of these functions is for I2C/SPI/GPIO. This new set of drivers will
> manage I2C and GPIO.
>
> Changes from v5:
> Addressed reviewers' comments.
> Better handling of 0-bytes i2c commands
> Use of better USB API.
>
> Changes from v4:
> I should have addressed all the comments: rework of the GPIO interrupt
> handling code to be more modern, changes in Kconfig wording, some code
> cleanup.
> Driver was tested again with up to 4 of these devices. No
> error seen.
>
> Changes from v3:
> - really converted to an MFD driver. Driver is now split into 3
> modules (MFD+I2C+GPIO).
> - minor code cleanups
>
> Changes from v2:
> - bug fixes
> - more robust USB enumeration
> - Changed to an MFD driver as suggested
>
> During testing I found that i2c handles hot removal, but not gpio. The
> gpio subsystem will complain with 'REMOVING GPIOCHIP WITH GPIOS STILL
> REQUESTED', but it's a gpiolib issue.
>
> Changes from v1:
> - Removed double Signed-off-by
> - Move Kconfig into the same directory as the driver
>
> frank zago (4):
> mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
> gpio: ch341: add GPIO MFD cell driver for the CH341
> i2c: ch341: add I2C MFD cell driver for the CH341
> docs: misc: add documentation for ch341 driver
>
> Documentation/misc-devices/ch341.rst | 109 ++++++++
> Documentation/misc-devices/index.rst | 1 +
> MAINTAINERS | 9 +
> drivers/gpio/Kconfig | 10 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-ch341.c | 385 +++++++++++++++++++++++++++
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-ch341.c | 377 ++++++++++++++++++++++++++
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/ch341-core.c | 90 +++++++
> include/linux/mfd/ch341.h | 26 ++
> 13 files changed, 1030 insertions(+)
> create mode 100644 Documentation/misc-devices/ch341.rst
> create mode 100644 drivers/gpio/gpio-ch341.c
> create mode 100644 drivers/i2c/busses/i2c-ch341.c
> create mode 100644 drivers/mfd/ch341-core.c
> create mode 100644 include/linux/mfd/ch341.h
> ---
> 2.32.0
next prev parent reply other threads:[~2024-11-08 15:58 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-16 1:37 [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode frank zago
2022-06-16 1:37 ` [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode frank zago
2022-06-27 14:04 ` Lee Jones
2022-06-27 14:28 ` Greg Kroah-Hartman
2022-06-27 14:43 ` Lee Jones
2022-06-27 23:30 ` Frank Zago
2022-07-04 10:09 ` Lee Jones
2022-06-16 1:37 ` [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341 frank zago
2022-06-17 8:29 ` Linus Walleij
2022-06-20 10:25 ` Johan Hovold
2022-06-20 16:08 ` Andy Shevchenko
2022-06-21 6:57 ` Johan Hovold
2022-06-16 1:37 ` [PATCH v6 3/4] i2c: ch341: add I2C " frank zago
2022-06-16 5:09 ` Randy Dunlap
2022-06-16 9:18 ` kernel test robot
2022-06-16 11:10 ` kernel test robot
2022-06-16 1:37 ` [PATCH v6 4/4] docs: misc: add documentation for ch341 driver frank zago
2022-06-20 10:08 ` [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode Johan Hovold
2024-11-08 15:58 ` Matwey V. Kornilov [this message]
2024-11-08 19:11 ` Linus Walleij
2024-11-08 23:15 ` Frank Zago
2024-11-09 7:32 ` Matwey V. Kornilov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf32d676-831c-4c3f-8965-c9be3abd5300@gmail.com \
--to=matwey.kornilov@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=frank@zago.net \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).