From: Heiner Kallweit <hkallweit1@gmail.com>
To: Wolfram Sang <wsa@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: "linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
linux-sound@vger.kernel.org
Subject: [PATCH v2 2/4] i2c: Replace list-based mechanism for handling auto-detected clients
Date: Thu, 22 Aug 2024 21:48:05 +0200 [thread overview]
Message-ID: <d52c2722-5f2e-4224-a8b3-7c9d0cb431d0@gmail.com> (raw)
In-Reply-To: <3982b2a6-975e-40d2-bf02-2155e5c36c14@gmail.com>
So far a list is used to track auto-detected clients per driver.
The same functionality can be achieved much simpler by flagging
auto-detected clients.
Two notes regarding the usage of driver_for_each_device:
In our case it can't fail, however the function is annotated __must_check.
So a little workaround is needed to avoid a compiler warning.
Then we may remove nodes from the list over which we iterate.
This is safe, see the explanation at the beginning of lib/klist.c.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/i2c/i2c-core-base.c | 48 ++++++++++---------------------------
include/linux/i2c.h | 3 +--
2 files changed, 13 insertions(+), 38 deletions(-)
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 79292bb33..ea76007ea 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1662,23 +1662,6 @@ int i2c_add_numbered_adapter(struct i2c_adapter *adap)
}
EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
-static void i2c_do_del_adapter(struct i2c_driver *driver,
- struct i2c_adapter *adapter)
-{
- struct i2c_client *client, *_n;
-
- /* Remove the devices we created ourselves as the result of hardware
- * probing (using a driver's detect method) */
- list_for_each_entry_safe(client, _n, &driver->clients, detected) {
- if (client->adapter == adapter) {
- dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
- client->name, client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
- }
-}
-
static int __unregister_client(struct device *dev, void *dummy)
{
struct i2c_client *client = i2c_verify_client(dev);
@@ -1694,12 +1677,6 @@ static int __unregister_dummy(struct device *dev, void *dummy)
return 0;
}
-static int __process_removed_adapter(struct device_driver *d, void *data)
-{
- i2c_do_del_adapter(to_i2c_driver(d), data);
- return 0;
-}
-
/**
* i2c_del_adapter - unregister I2C adapter
* @adap: the adapter being unregistered
@@ -1723,11 +1700,6 @@ void i2c_del_adapter(struct i2c_adapter *adap)
}
i2c_acpi_remove_space_handler(adap);
- /* Tell drivers about this removal */
- mutex_lock(&core_lock);
- bus_for_each_drv(&i2c_bus_type, NULL, adap,
- __process_removed_adapter);
- mutex_unlock(&core_lock);
/* Remove devices instantiated from sysfs */
mutex_lock_nested(&adap->userspace_clients_lock,
@@ -1967,7 +1939,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
- INIT_LIST_HEAD(&driver->clients);
/* When registration returns, the driver core
* will have called probe() for all matching-but-unbound devices.
@@ -1985,10 +1956,13 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
}
EXPORT_SYMBOL(i2c_register_driver);
-static int __process_removed_driver(struct device *dev, void *data)
+static int __i2c_unregister_detected_client(struct device *dev, void *argp)
{
- if (dev->type == &i2c_adapter_type)
- i2c_do_del_adapter(data, to_i2c_adapter(dev));
+ struct i2c_client *client = i2c_verify_client(dev);
+
+ if (client && client->flags & I2C_CLIENT_AUTO)
+ i2c_unregister_device(client);
+
return 0;
}
@@ -1999,7 +1973,10 @@ static int __process_removed_driver(struct device *dev, void *data)
*/
void i2c_del_driver(struct i2c_driver *driver)
{
- i2c_for_each_dev(driver, __process_removed_driver);
+ /* Satisfy __must_check, function can't fail */
+ if (driver_for_each_device(&driver->driver, NULL, NULL,
+ __i2c_unregister_detected_client)) {
+ }
driver_unregister(&driver->driver);
pr_debug("driver [%s] unregistered\n", driver->driver.name);
@@ -2426,6 +2403,7 @@ static int i2c_detect_address(struct i2c_client *temp_client,
/* Finally call the custom detection function */
memset(&info, 0, sizeof(struct i2c_board_info));
info.addr = addr;
+ info.flags = I2C_CLIENT_AUTO;
err = driver->detect(temp_client, &info);
if (err) {
/* -ENODEV is returned if the detection fails. We catch it
@@ -2452,9 +2430,7 @@ static int i2c_detect_address(struct i2c_client *temp_client,
dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n",
info.type, info.addr);
client = i2c_new_client_device(adapter, &info);
- if (!IS_ERR(client))
- list_add_tail(&client->detected, &driver->clients);
- else
+ if (IS_ERR(client))
dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n",
info.type, info.addr);
}
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 377def497..910a9b259 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -244,7 +244,6 @@ enum i2c_driver_flags {
* @id_table: List of I2C devices supported by this driver
* @detect: Callback for device detection
* @address_list: The I2C addresses to probe (for detect)
- * @clients: List of detected clients we created (for i2c-core use only)
* @flags: A bitmask of flags defined in &enum i2c_driver_flags
*
* The driver.owner field should be set to the module owner of this driver.
@@ -299,7 +298,6 @@ struct i2c_driver {
/* Device detection callback for automatic device creation */
int (*detect)(struct i2c_client *client, struct i2c_board_info *info);
const unsigned short *address_list;
- struct list_head clients;
u32 flags;
};
@@ -334,6 +332,7 @@ struct i2c_client {
#define I2C_CLIENT_SLAVE 0x20 /* we are the slave */
#define I2C_CLIENT_HOST_NOTIFY 0x40 /* We want to use I2C host notify */
#define I2C_CLIENT_WAKE 0x80 /* for board_info; true iff can wake */
+#define I2C_CLIENT_AUTO 0x100 /* for board_info; auto-detected */
#define I2C_CLIENT_SCCB 0x9000 /* Use Omnivision SCCB protocol */
/* Must match I2C_M_STOP|IGNORE_NAK */
--
2.46.0
next prev parent reply other threads:[~2024-08-22 19:48 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 19:45 [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients Heiner Kallweit
2024-08-22 19:47 ` [PATCH v2 1/4] ALSA: ppc: Remove i2c client removal hack Heiner Kallweit
2024-08-23 7:49 ` Takashi Iwai
2024-08-22 19:48 ` Heiner Kallweit [this message]
2024-10-08 8:50 ` [PATCH v2 2/4] i2c: Replace list-based mechanism for handling auto-detected clients Wolfram Sang
2024-10-08 9:20 ` Wolfram Sang
2024-11-01 7:36 ` Wolfram Sang
2024-11-01 20:45 ` Heiner Kallweit
2024-11-01 20:57 ` Wolfram Sang
2024-11-01 21:16 ` Heiner Kallweit
2024-08-22 19:48 ` [PATCH v2 3/4] i2c: Replace list-based mechanism for handling userspace-created clients Heiner Kallweit
2024-10-08 9:00 ` Wolfram Sang
2024-08-22 19:49 ` [PATCH v2 4/4] i2c: core: Remove obsolete members of i2c_adapter and i2c_client Heiner Kallweit
2024-10-08 9:00 ` Wolfram Sang
2024-10-08 10:59 ` Heiner Kallweit
2024-09-01 9:30 ` [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients Wolfram Sang
2024-09-01 20:08 ` Heiner Kallweit
2024-09-30 10:10 ` Heiner Kallweit
2024-09-30 10:59 ` Wolfram Sang
2024-10-08 8:43 ` Wolfram Sang
2024-10-08 11:31 ` Heiner Kallweit
2024-10-29 6:44 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d52c2722-5f2e-4224-a8b3-7c9d0cb431d0@gmail.com \
--to=hkallweit1@gmail.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).