From: Krzysztof Kozlowski <krzk@kernel.org>
To: Pratap Nirujogi <pratap.nirujogi@amd.com>, andi.shyti@kernel.org
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
benjamin.chan@amd.com
Subject: Re: [PATCH] i2c: amd-isp: Add ISP i2c-designware driver
Date: Sat, 1 Mar 2025 14:33:31 +0100 [thread overview]
Message-ID: <d5666c26-164b-4b20-ad9e-0e1e5b0d4ebe@kernel.org> (raw)
In-Reply-To: <20250228164519.3453927-1-pratap.nirujogi@amd.com>
On 28/02/2025 17:45, Pratap Nirujogi wrote:
> The camera sensor is connected via ISP I2C bus in AMD SOC
> architectures. Add new I2C designware driver to support
> new camera sensors on AMD HW.
>
> Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-designware-amdisp.c | 266 +++++++++++++++++++++
> drivers/i2c/busses/i2c-designware-amdisp.h | 24 ++
> 4 files changed, 301 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-designware-amdisp.c
> create mode 100644 drivers/i2c/busses/i2c-designware-amdisp.h
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index fc438f445771..79448211baae 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -592,6 +592,16 @@ config I2C_DESIGNWARE_PLATFORM
> This driver can also be built as a module. If so, the module
> will be called i2c-designware-platform.
>
> +config I2C_DESIGNWARE_AMDISP
> + tristate "Synopsys DesignWare Platform for AMDISP"
> + depends on I2C_DESIGNWARE_CORE
> + help
> + If you say yes to this option, support will be included for the
> + AMDISP Synopsys DesignWare I2C adapter.
> +
> + This driver can also be built as a module. If so, the module
> + will be called amd_isp_i2c_designware.
> +
> config I2C_DESIGNWARE_AMDPSP
> bool "AMD PSP I2C semaphore support"
> depends on ACPI
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 1c2a4510abe4..cfe53038df69 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
> i2c-designware-platform-y := i2c-designware-platdrv.o
> i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP) += i2c-designware-amdpsp.o
> i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
> +obj-$(CONFIG_I2C_DESIGNWARE_AMDISP) += i2c-designware-amdisp.o
> obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
> i2c-designware-pci-y := i2c-designware-pcidrv.o
> obj-$(CONFIG_I2C_DIGICOLOR) += i2c-digicolor.o
> diff --git a/drivers/i2c/busses/i2c-designware-amdisp.c b/drivers/i2c/busses/i2c-designware-amdisp.c
> new file mode 100644
> index 000000000000..dc90510a440b
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-designware-amdisp.c
> @@ -0,0 +1,266 @@
> +/* SPDX-License-Identifier: MIT */
> +/*
> + * Copyright 2024-2025 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
Hm?
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
Drop... or you miss bindings.
Many more headers look not used or even wrong.
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-03-01 13:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-28 16:45 [PATCH] i2c: amd-isp: Add ISP i2c-designware driver Pratap Nirujogi
2025-03-01 3:33 ` Mario Limonciello
2025-03-03 5:27 ` Nirujogi, Pratap
2025-04-22 15:59 ` Nirujogi, Pratap
2025-03-01 8:32 ` Christophe JAILLET
2025-04-22 16:07 ` Nirujogi, Pratap
2025-03-01 13:26 ` Krzysztof Kozlowski
2025-04-22 16:12 ` Nirujogi, Pratap
2025-03-01 13:33 ` Krzysztof Kozlowski [this message]
2025-04-22 16:14 ` Nirujogi, Pratap
2025-03-03 9:49 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d5666c26-164b-4b20-ad9e-0e1e5b0d4ebe@kernel.org \
--to=krzk@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=benjamin.chan@amd.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pratap.nirujogi@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox