Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev

[Randy Dunlap <rdunlap@infradead.org>]

On 11/12/21 4:34 AM, Andy Shevchenko wrote:
> $ scripts/kernel-doc -none drivers/i2c/busses/i2c-designware-core.h
> warning: Function parameter or member 'rst' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'get_clk_rate_khz' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'flags' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'functionality' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'master_cfg' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'set_sda_hold_time' not described in 'dw_i2c_dev'
> warning: Function parameter or member 'rinfo' not described in 'dw_i2c_dev'
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Hi Andy,

Thanks for the kernel-doc fixes.

> ---
>   drivers/i2c/busses/i2c-designware-core.h | 13 +++++++++----
>   1 file changed, 9 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
> index 60a2e750cee9..4b26cba40139 100644
> --- a/drivers/i2c/busses/i2c-designware-core.h
> +++ b/drivers/i2c/busses/i2c-designware-core.h
> @@ -191,23 +191,26 @@ struct reset_control;
>    * @cmd_complete: tx completion indicator
>    * @clk: input reference clock
>    * @pclk: clock required to access the registers
> + * @rst: optional reset for the controller
>    * @slave: represent an I2C slave device
> + * @get_clk_rate_khz: callback to retrieve IP specific bus speed
>    * @cmd_err: run time hadware error code
>    * @msgs: points to an array of messages currently being transferred
>    * @msgs_num: the number of elements in msgs
> - * @msg_write_idx: the element index of the current tx message in the msgs
> - *	array
> + * @msg_write_idx: the element index of the current tx message in the msgs array
>    * @tx_buf_len: the length of the current tx buffer
>    * @tx_buf: the current tx buffer
> - * @msg_read_idx: the element index of the current rx message in the msgs
> - *	array
> + * @msg_read_idx: the element index of the current rx message in the msgs array
>    * @rx_buf_len: the length of the current rx buffer
>    * @rx_buf: the current rx buffer
>    * @msg_err: error status of the current transfer
>    * @status: i2c master status, one of STATUS_*
>    * @abort_source: copy of the TX_ABRT_SOURCE register
>    * @irq: interrupt number for the i2c master
> + * @flags: platform specific flags like type of IO accessors or model
>    * @adapter: i2c subsystem adapter node
> + * @functionality: I2C_FUNC_* ORed bits to reflect what controller does support
> + * @master_cfg: configuration for the master device
>    * @slave_cfg: configuration for the slave device
>    * @tx_fifo_depth: depth of the hardware tx fifo
>    * @rx_fifo_depth: depth of the hardware rx fifo
> @@ -228,7 +231,9 @@ struct reset_control;
>    * @disable: function to disable the controller
>    * @disable_int: function to disable all interrupts
>    * @init: function to initialize the I2C hardware
> + * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
>    * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
> + * @rinfo: I²C GPIO recovery information


Preferably:   "I2C"
like it is in thousands of places in the kernel source tree.

>    * @suspended: set to true if the controller is suspended
>    *
>    * HCNT and LCNT parameters can be used if the platform knows more accurate
> 


-- 
~Randy