Re: [PATCH v2 1/2] i2c: tegra: Better handle case where CPU0 is busy for a long time

[Dmitry Osipenko <digetx@gmail.com>]

Hello Jon,

20.04.2020 22:53, Jon Hunter пишет:
> Hi Dmitry,
> 
> On 24/03/2020 19:12, Dmitry Osipenko wrote:
>> Boot CPU0 always handle I2C interrupt and under some rare circumstances
>> (like running KASAN + NFS root) it may stuck in uninterruptible state for
>> a significant time. In this case we will get timeout if I2C transfer is
>> running on a sibling CPU, despite of IRQ being raised. In order to handle
>> this rare condition, the IRQ status needs to be checked after completion
>> timeout.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>  drivers/i2c/busses/i2c-tegra.c | 27 +++++++++++++++------------
>>  1 file changed, 15 insertions(+), 12 deletions(-)
> 
> 
> I have noticed a regression on tegra30-cardhu-a04 when testing system
> suspend. Git bisect is pointing to this commit and reverting it fixes
> the problem. In the below console log I2C fails to resume ...
> 
...
> [   60.690035] PM: Device 3000.pcie failed to resume noirq: error -16

...
> [   60.696859] tegra-mc 7000f000.memory-controller: fdcdwr2: write @0x877e8400: EMEM address decode error (SMMU translation error [--S])
> 
> [   60.708876] tegra-mc 7000f000.memory-controller: fdcdwr2: write @0x877e8400: Page fault (SMMU translation error [--S])

This looks very wrong, the error tells that 3d hardware is active and
doing something odd. Are you running some 3d tests?

...
> Have you seen this?

No, I haven't seen that. I'm not using PCIE and it looks like it's the
problem.

Looking at the PCIE driver code, seems it's not syncing the RPM state on
suspend/resume.

Please try this change:

--- >8 ---
diff --git a/drivers/pci/controller/pci-tegra.c
b/drivers/pci/controller/pci-tegra.c
index 3e64ba6a36a8..b1fcbae4109c 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -2870,8 +2870,8 @@ static int __maybe_unused
tegra_pcie_pm_resume(struct device *dev)

 static const struct dev_pm_ops tegra_pcie_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_pcie_pm_suspend, tegra_pcie_pm_resume, NULL)
-	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_pcie_pm_suspend,
-				      tegra_pcie_pm_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
 };


 static struct platform_driver tegra_pcie_driver = {
--- >8 ---

Secondly, I2C driver suspends on NOIRQ level, while APBDMA driver
suspends on default level. This is also wrong, please try to apply this
hunk as well:

--- >8 ---
diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c
index f6a2f42ffc51..e682ac86bd27 100644
--- a/drivers/dma/tegra20-apb-dma.c
+++ b/drivers/dma/tegra20-apb-dma.c
@@ -1653,7 +1653,7 @@ static int __maybe_unused
tegra_dma_dev_resume(struct device *dev)
 static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_dma_runtime_suspend, tegra_dma_runtime_resume,
 			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_dma_dev_suspend, tegra_dma_dev_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_dma_dev_suspend, tegra_dma_dev_resume)
 };

 static const struct of_device_id tegra_dma_of_match[] = {
--- >8 ---