From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Frank Li <Frank.Li@nxp.com>
Cc: conor.culhane@silvaco.com, alexandre.belloni@bootlin.com,
joe@perches.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev
Subject: Re: [PATCH 2/6] i3c: master: svc: fix wrong data return when IBI happen during start frame
Date: Tue, 17 Oct 2023 16:21:32 +0200 [thread overview]
Message-ID: <20231017162132.361be2c3@xps-13> (raw)
In-Reply-To: <20231016153232.2851095-3-Frank.Li@nxp.com>
Hi Frank,
Frank.Li@nxp.com wrote on Mon, 16 Oct 2023 11:32:28 -0400:
> ┌─────┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┏──┐ ┌─────
> SCL: ┘ └─────┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┛ └──┘
> ───┐ ┌─────┐ ┌─────┐ ┌───────────┐
> SDA: └───────────────────────┘ └─────┘ └─────┘ └─────
> xxx╱ ╲╱ ╲╱ ╲╱ ╲╱ ╲
> : xxx╲IBI ╱╲ Addr(0x0a) ╱╲ RW ╱╲NACK╱╲ S ╱
>
> In-Band Interrupt (IBI) occurred and IBI work thread may not to be
If an In-Band... occurs and the IBI work thread is not
immediately scheduled, when svc... initiates an I3C transfer and
attempts...
> scheduled. When svc_i3c_master_priv_xfers() initiates the I3C transfer
> frame and attempts to send address 0x7e, the target interprets it as an
> IBI handler and returns the target address 0x0a.
>
> However, svc_i3c_master_priv_xfers() does not handle this case and proceeds
> with other transfers, resulting in incorrect data being returned.
>
> IBIWON check has been added in svc_i3c_master_xfer(). In case this
Add IBIWON check in svc_...
> situation occurs, a failure is now returned to the driver.
return a failure...
>
> Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/i3c/master/svc-i3c-master.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> index ebdb3ea1af9d..0f57a5f75e39 100644
> --- a/drivers/i3c/master/svc-i3c-master.c
> +++ b/drivers/i3c/master/svc-i3c-master.c
> @@ -1009,6 +1009,9 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
> u32 reg;
> int ret;
>
> + /* clean SVC_I3C_MINT_IBIWON w1c bits */
> + writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
> +
> writel(SVC_I3C_MCTRL_REQUEST_START_ADDR |
> xfer_type |
> SVC_I3C_MCTRL_IBIRESP_NACK |
> @@ -1027,6 +1030,23 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
> goto emit_stop;
> }
>
> + /*
> + * According to I3C spec ver 1.1.1, 5.1.2.2.3 Consequence of Controller Starting a Frame
> + * with I3C Target Address.
> + *
> + * The I3C Controller normally should start a Frame, the Address may be arbitrated, and so
> + * the Controller shall monitor to see whether an In-Band Interrupt request, a Controller
> + * Role Request (i.e., Secondary Controller requests to become the Active Controller), or
> + * a Hot-Join Request has been made.
> + *
> + * If missed IBIWON check, the wrong data will be return. When IBIWON happen, return falure
> + * and yeild the above events handler.
Typos: yeild and falure
> + */
> + if (SVC_I3C_MSTATUS_IBIWON(reg)) {
> + ret = -ENXIO;
> + goto emit_stop;
> + }
> +
> if (rnw)
> ret = svc_i3c_master_read(master, in, xfer_len);
> else
With all the typos fixed:
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Thanks,
Miquèl
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2023-10-17 14:21 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-16 15:32 [PATCH 0/6] i3c: master: svc: collection of bugs fixes Frank Li
2023-10-16 15:32 ` [PATCH 1/6] i3c: master: svc: fix race condition in ibi work thread Frank Li
2023-10-17 13:33 ` kernel test robot
2023-10-17 14:16 ` Miquel Raynal
2023-10-17 14:37 ` Frank Li
2023-10-17 14:49 ` Miquel Raynal
2023-10-17 15:10 ` Frank Li
2023-10-17 15:23 ` Miquel Raynal
2023-10-16 15:32 ` [PATCH 2/6] i3c: master: svc: fix wrong data return when IBI happen during start frame Frank Li
2023-10-17 14:21 ` Miquel Raynal [this message]
2023-10-16 15:32 ` [PATCH 3/6] i3c: master: svc: fix ibi may not return mandatory data byte Frank Li
2023-10-17 14:27 ` Miquel Raynal
2023-10-17 20:55 ` Frank Li
2023-10-16 15:32 ` [PATCH 4/6] i3c: master: svc: fix check wrong status register in irq handler Frank Li
2023-10-17 14:28 ` Miquel Raynal
2023-10-16 15:32 ` [PATCH 5/6] i3c: master: svc: fix SDA keep low when polling IBIWON timeout happen Frank Li
2023-10-17 14:29 ` Miquel Raynal
2023-10-16 15:32 ` [PATCH 6/6] i3c: master: svc: fix random hot join failure since timeout error Frank Li
2023-10-17 14:33 ` Miquel Raynal
2023-10-17 14:45 ` Frank Li
2023-10-17 15:06 ` Miquel Raynal
2023-10-17 15:25 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231017162132.361be2c3@xps-13 \
--to=miquel.raynal@bootlin.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor.culhane@silvaco.com \
--cc=imx@lists.linux.dev \
--cc=joe@perches.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox