[PATCH v3 4/5] i3c: mipi-i3c-hci: Change name of INTR_STATUS bit 11

[Jarkko Nikula <jarkko.nikula@linux.intel.com>]

INTR_STATUS bit 11 INTR_HC_RESET_CANCEL was probably projected for the
MIPI I3C HCI specification version 2 but was not ever implemented.

This bit is first time specified in the v1.2 as HC_SEQ_CANCEL_STAT
"Host Controller Cancelled Transaction Sequence". Update the definition
and debug print of it accordingly.

While at it, change DBG() print to dev_dbg().

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
v3: Added Reviewed-by
---
 drivers/i3c/master/mipi-i3c-hci/core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index 4c4100d2d9af..0bb74173ca94 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -78,7 +78,7 @@
 #define INTR_SIGNAL_ENABLE		0x28
 #define INTR_FORCE			0x2c
 #define INTR_HC_CMD_SEQ_UFLOW_STAT	BIT(12)	/* Cmd Sequence Underflow */
-#define INTR_HC_RESET_CANCEL		BIT(11)	/* HC Cancelled Reset */
+#define INTR_HC_SEQ_CANCEL		BIT(11)	/* HC Cancelled Transaction Sequence */
 #define INTR_HC_INTERNAL_ERR		BIT(10)	/* HC Internal Error */
 
 #define DAT_SECTION			0x30	/* Device Address Table */
@@ -596,9 +596,10 @@ static irqreturn_t i3c_hci_irq_handler(int irq, void *dev_id)
 	if (val)
 		result = IRQ_HANDLED;
 
-	if (val & INTR_HC_RESET_CANCEL) {
-		DBG("cancelled reset");
-		val &= ~INTR_HC_RESET_CANCEL;
+	if (val & INTR_HC_SEQ_CANCEL) {
+		dev_dbg(&hci->master.dev,
+			"Host Controller Cancelled Transaction Sequence\n");
+		val &= ~INTR_HC_SEQ_CANCEL;
 	}
 	if (val & INTR_HC_INTERNAL_ERR) {
 		dev_err(&hci->master.dev, "Host Controller Internal Error\n");
-- 
2.47.2


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c