From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, linux-i3c@lists.infradead.org
Subject: [PATCH V2 12/13] i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
Date: Fri, 14 Nov 2025 20:13:55 +0200 [thread overview]
Message-ID: <20251114181356.66515-13-adrian.hunter@intel.com> (raw)
In-Reply-To: <20251114181356.66515-1-adrian.hunter@intel.com>
Add support for Latency Tolerance Reporting (LTR) for Intel controllers.
Implement PM ->set_latency_tolerance() callback to set LTR register values.
Also expose LTR register values via debugfs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V2:
Make use of FIELD_PREP()
Improve handling of values that exceed the maximum
.../master/mipi-i3c-hci/mipi-i3c-hci-pci.c | 125 ++++++++++++++++++
1 file changed, 125 insertions(+)
diff --git a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
index 3f391b0854ae..2c827e877d29 100644
--- a/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
+++ b/drivers/i3c/master/mipi-i3c-hci/mipi-i3c-hci-pci.c
@@ -7,12 +7,15 @@
* Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
*/
#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/debugfs.h>
#include <linux/idr.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/pm_qos.h>
struct mipi_i3c_hci_pci {
struct pci_dev *pci;
@@ -35,10 +38,122 @@ static DEFINE_IDA(mipi_i3c_hci_pci_ida);
#define INTEL_RESETS_RESET_DONE BIT(1)
#define INTEL_RESETS_TIMEOUT_US (10 * USEC_PER_MSEC)
+#define INTEL_ACTIVELTR 0x0c
+#define INTEL_IDLELTR 0x10
+
+#define INTEL_LTR_REQ BIT(15)
+#define INTEL_LTR_SCALE_MASK GENMASK(11, 10)
+#define INTEL_LTR_SCALE_1US FIELD_PREP(INTEL_LTR_SCALE_MASK, 2)
+#define INTEL_LTR_SCALE_32US FIELD_PREP(INTEL_LTR_SCALE_MASK, 3)
+#define INTEL_LTR_VALUE_MASK GENMASK(9, 0)
+
struct intel_host {
void __iomem *priv;
+ u32 active_ltr;
+ u32 idle_ltr;
+ struct dentry *debugfs_root;
};
+static void intel_cache_ltr(struct intel_host *host)
+{
+ host->active_ltr = readl(host->priv + INTEL_ACTIVELTR);
+ host->idle_ltr = readl(host->priv + INTEL_IDLELTR);
+}
+
+static void intel_ltr_set(struct device *dev, s32 val)
+{
+ struct mipi_i3c_hci_pci *hci = dev_get_drvdata(dev);
+ struct intel_host *host = hci->private;
+ u32 ltr;
+
+ /*
+ * Program latency tolerance (LTR) accordingly what has been asked
+ * by the PM QoS layer or disable it in case we were passed
+ * negative value or PM_QOS_LATENCY_ANY.
+ */
+ ltr = readl(host->priv + INTEL_ACTIVELTR);
+
+ if (val == PM_QOS_LATENCY_ANY || val < 0) {
+ ltr &= ~INTEL_LTR_REQ;
+ } else {
+ ltr |= INTEL_LTR_REQ;
+ ltr &= ~INTEL_LTR_SCALE_MASK;
+ ltr &= ~INTEL_LTR_VALUE_MASK;
+
+ if (val > INTEL_LTR_VALUE_MASK) {
+ val >>= 5;
+ if (val > INTEL_LTR_VALUE_MASK)
+ val = INTEL_LTR_VALUE_MASK;
+ ltr |= INTEL_LTR_SCALE_32US | val;
+ } else {
+ ltr |= INTEL_LTR_SCALE_1US | val;
+ }
+ }
+
+ if (ltr == host->active_ltr)
+ return;
+
+ writel(ltr, host->priv + INTEL_ACTIVELTR);
+ writel(ltr, host->priv + INTEL_IDLELTR);
+
+ /* Cache the values into intel_host structure */
+ intel_cache_ltr(host);
+}
+
+static void intel_ltr_expose(struct device *dev)
+{
+ dev->power.set_latency_tolerance = intel_ltr_set;
+ dev_pm_qos_expose_latency_tolerance(dev);
+}
+
+static void intel_ltr_hide(struct device *dev)
+{
+ dev_pm_qos_hide_latency_tolerance(dev);
+ dev->power.set_latency_tolerance = NULL;
+}
+
+static struct dentry *intel_actualize_debugfs_root(bool add)
+{
+ static struct dentry *debugfs_root;
+ static DEFINE_MUTEX(lock);
+ static int ref_cnt;
+
+ guard(mutex)(&lock);
+
+ ref_cnt += add ? 1 : -1;
+
+ if (ref_cnt) {
+ if (IS_ERR_OR_NULL(debugfs_root))
+ debugfs_root = debugfs_create_dir("intel_i3c", NULL);
+ } else {
+ debugfs_remove(debugfs_root);
+ debugfs_root = NULL;
+ }
+
+ return debugfs_root;
+}
+
+static void intel_add_debugfs(struct mipi_i3c_hci_pci *hci)
+{
+ struct dentry *debugfs_root = intel_actualize_debugfs_root(true);
+ struct dentry *dir = debugfs_create_dir(dev_name(&hci->pci->dev), debugfs_root);
+ struct intel_host *host = hci->private;
+
+ intel_cache_ltr(host);
+
+ host->debugfs_root = dir;
+ debugfs_create_x32("active_ltr", 0444, dir, &host->active_ltr);
+ debugfs_create_x32("idle_ltr", 0444, dir, &host->idle_ltr);
+}
+
+static void intel_remove_debugfs(struct mipi_i3c_hci_pci *hci)
+{
+ struct intel_host *host = hci->private;
+
+ debugfs_remove_recursive(host->debugfs_root);
+ intel_actualize_debugfs_root(false);
+}
+
static void intel_reset(void __iomem *priv)
{
u32 reg;
@@ -73,11 +188,21 @@ static int intel_i3c_init(struct mipi_i3c_hci_pci *hci)
intel_reset(priv);
+ intel_ltr_expose(&hci->pci->dev);
+ intel_add_debugfs(hci);
+
return 0;
}
+static void intel_exit(struct mipi_i3c_hci_pci *hci)
+{
+ intel_remove_debugfs(hci);
+ intel_ltr_hide(&hci->pci->dev);
+}
+
static const struct mipi_i3c_hci_pci_info intel_info = {
.init = intel_i3c_init,
+ .exit = intel_exit,
};
static int mipi_i3c_hci_pci_probe(struct pci_dev *pci,
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2025-11-14 18:14 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 18:13 [PATCH V2 00/13] i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers Adrian Hunter
2025-11-14 18:13 ` [PATCH V2 01/13] i3c: mipi-i3c-hci-pci: Set 64-bit DMA mask " Adrian Hunter
2025-11-14 19:43 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 02/13] i3c: mipi-i3c-hci-pci: Move all Intel-related definitions together Adrian Hunter
2025-11-14 18:13 ` [PATCH V2 03/13] i3c: mipi-i3c-hci-pci: Rename some Intel-related identifiers Adrian Hunter
2025-11-14 19:44 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 04/13] i3c: mipi-i3c-hci-pci: Use readl_poll_timeout() Adrian Hunter
2025-11-14 19:44 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 05/13] i3c: mipi-i3c-hci-pci: Constify driver data Adrian Hunter
2025-11-14 18:13 ` [PATCH V2 06/13] i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping Adrian Hunter
2025-11-14 18:13 ` [PATCH V2 07/13] i3c: mipi-i3c-hci-pci: Factor out intel_reset() Adrian Hunter
2025-11-14 19:46 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 08/13] i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information Adrian Hunter
2025-11-14 18:13 ` [PATCH V2 09/13] i3c: mipi-i3c-hci-pci: Change callback parameter Adrian Hunter
2025-11-14 19:49 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 10/13] i3c: mipi-i3c-hci-pci: Add exit callback Adrian Hunter
2025-11-14 19:52 ` Frank Li
2025-11-14 19:59 ` Adrian Hunter
2025-11-17 15:33 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 11/13] i3c: mipi-i3c-hci-pci: Allocate a structure for Intel controller information Adrian Hunter
2025-11-14 20:11 ` Frank Li
2025-11-14 18:13 ` Adrian Hunter [this message]
2025-11-14 20:09 ` [PATCH V2 12/13] i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers Frank Li
2025-11-17 11:36 ` Adrian Hunter
2025-11-17 15:59 ` Frank Li
2025-11-17 17:47 ` Adrian Hunter
2025-11-17 17:54 ` Frank Li
2025-11-17 18:09 ` Adrian Hunter
2025-11-17 18:56 ` Frank Li
2025-11-17 19:07 ` Adrian Hunter
2025-11-17 19:35 ` Frank Li
2025-11-14 18:13 ` [PATCH V2 13/13] i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 " Adrian Hunter
2025-11-14 20:10 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251114181356.66515-13-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).