From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V2 19/20] i3c: mipi-i3c-hci: Add optional Runtime PM support
Date: Thu, 8 Jan 2026 10:05:57 +0200 [thread overview]
Message-ID: <20260108080558.21767-20-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260108080558.21767-1-adrian.hunter@intel.com>
Implement optional Runtime PM support for the MIPI I3C HCI driver.
Introduce runtime suspend and resume callbacks to manage bus state and
restore hardware configuration after resume. Optionally enable autosuspend
with a default delay of 1 second, and add helper functions to control
Runtime PM during probe and remove.
Read quirks from i3c_hci_driver_ids[] and set new quirk
HCI_QUIRK_RPM_ALLOWED for intel-lpss-i3c devices to enable runtime PM for
them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V2:
Use new i3c_hci_reset_and_init() and i3c_hci_set_master_dyn_addr()
Use devm_pm_runtime_set_active_enabled() which allows
i3c_hci_rpm_disable() to be dropped.
SET_RUNTIME_PM_OPS -> RUNTIME_PM_OPS
drivers/i3c/master/mipi-i3c-hci/core.c | 76 ++++++++++++++++++++++++--
drivers/i3c/master/mipi-i3c-hci/hci.h | 2 +
2 files changed, 72 insertions(+), 6 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index ec5425f07635..02c5a133e329 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/platform_data/mipi-i3c-hci.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include "hci.h"
#include "ext_caps.h"
@@ -182,6 +183,7 @@ void i3c_hci_sync_irq_inactive(struct i3c_hci *hci)
int irq = platform_get_irq(pdev, 0);
reg_write(INTR_SIGNAL_ENABLE, 0x0);
+ hci->irq_inactive = true;
synchronize_irq(irq);
}
@@ -564,6 +566,14 @@ static irqreturn_t i3c_hci_irq_handler(int irq, void *dev_id)
irqreturn_t result = IRQ_NONE;
u32 val;
+ /*
+ * The IRQ can be shared, so the handler may be called when the IRQ is
+ * due to a different device. That could happen when runtime suspended,
+ * so exit immediately if IRQs are not expected for this device.
+ */
+ if (hci->irq_inactive)
+ return IRQ_NONE;
+
val = reg_read(INTR_STATUS);
reg_write(INTR_STATUS, val);
dev_dbg(&hci->master.dev, "INTR_STATUS %#x", val);
@@ -723,6 +733,55 @@ static int i3c_hci_reset_and_init(struct i3c_hci *hci)
return 0;
}
+static int i3c_hci_runtime_suspend(struct device *dev)
+{
+ struct i3c_hci *hci = dev_get_drvdata(dev);
+ int ret;
+
+ ret = i3c_hci_bus_disable(hci);
+ if (ret)
+ return ret;
+
+ hci->io->suspend(hci);
+
+ return 0;
+}
+
+static int i3c_hci_runtime_resume(struct device *dev)
+{
+ struct i3c_hci *hci = dev_get_drvdata(dev);
+ int ret;
+
+ ret = i3c_hci_reset_and_init(hci);
+ if (ret)
+ return -EIO;
+
+ i3c_hci_set_master_dyn_addr(hci);
+
+ mipi_i3c_hci_dat_v1.restore(hci);
+
+ hci->irq_inactive = false;
+
+ hci->io->resume(hci);
+
+ reg_set(HC_CONTROL, HC_CONTROL_BUS_ENABLE);
+
+ return 0;
+}
+
+#define DEFAULT_AUTOSUSPEND_DELAY_MS 1000
+
+static void i3c_hci_rpm_enable(struct device *dev)
+{
+ struct i3c_hci *hci = dev_get_drvdata(dev);
+
+ pm_runtime_set_autosuspend_delay(dev, DEFAULT_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ devm_pm_runtime_set_active_enabled(dev);
+
+ hci->master.rpm_allowed = true;
+}
+
static int i3c_hci_init(struct i3c_hci *hci)
{
bool size_in_dwords;
@@ -841,6 +900,8 @@ static int i3c_hci_probe(struct platform_device *pdev)
hci->master.dev.init_name = dev_name(&pdev->dev);
hci->quirks = (unsigned long)device_get_match_data(&pdev->dev);
+ if (!hci->quirks && platform_get_device_id(pdev))
+ hci->quirks = platform_get_device_id(pdev)->driver_data;
ret = i3c_hci_init(hci);
if (ret)
@@ -852,12 +913,10 @@ static int i3c_hci_probe(struct platform_device *pdev)
if (ret)
return ret;
- ret = i3c_master_register(&hci->master, &pdev->dev,
- &i3c_hci_ops, false);
- if (ret)
- return ret;
+ if (hci->quirks & HCI_QUIRK_RPM_ALLOWED)
+ i3c_hci_rpm_enable(&pdev->dev);
- return 0;
+ return i3c_master_register(&hci->master, &pdev->dev, &i3c_hci_ops, false);
}
static void i3c_hci_remove(struct platform_device *pdev)
@@ -880,11 +939,15 @@ static const struct acpi_device_id i3c_hci_acpi_match[] = {
MODULE_DEVICE_TABLE(acpi, i3c_hci_acpi_match);
static const struct platform_device_id i3c_hci_driver_ids[] = {
- { .name = "intel-lpss-i3c" },
+ { .name = "intel-lpss-i3c", HCI_QUIRK_RPM_ALLOWED },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, i3c_hci_driver_ids);
+static const struct dev_pm_ops i3c_hci_pm_ops = {
+ RUNTIME_PM_OPS(i3c_hci_runtime_suspend, i3c_hci_runtime_resume, NULL)
+};
+
static struct platform_driver i3c_hci_driver = {
.probe = i3c_hci_probe,
.remove = i3c_hci_remove,
@@ -893,6 +956,7 @@ static struct platform_driver i3c_hci_driver = {
.name = "mipi-i3c-hci",
.of_match_table = of_match_ptr(i3c_hci_of_match),
.acpi_match_table = i3c_hci_acpi_match,
+ .pm = pm_ptr(&i3c_hci_pm_ops),
},
};
module_platform_driver(i3c_hci_driver);
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index ed89228ea971..6035f74212db 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -51,6 +51,7 @@ struct i3c_hci {
void *io_data;
const struct hci_cmd_ops *cmd;
atomic_t next_cmd_tid;
+ bool irq_inactive;
u32 caps;
unsigned int quirks;
unsigned int DAT_entries;
@@ -144,6 +145,7 @@ struct i3c_hci_dev_data {
#define HCI_QUIRK_PIO_MODE BIT(2) /* Set PIO mode for AMD platforms */
#define HCI_QUIRK_OD_PP_TIMING BIT(3) /* Set OD and PP timings for AMD platforms */
#define HCI_QUIRK_RESP_BUF_THLD BIT(4) /* Set resp buf thld to 0 for AMD platforms */
+#define HCI_QUIRK_RPM_ALLOWED BIT(5) /* Runtime PM allowed */
/* global functions */
void mipi_i3c_hci_resume(struct i3c_hci *hci);
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-08 8:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 8:05 [PATCH V2 00/20] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 01/20] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 02/20] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 03/20] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-08 14:52 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 04/20] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 05/20] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 06/20] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Adrian Hunter
2026-01-08 14:56 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 09/20] i3c: mipi-i3c-hci: Introduce helper to restore DAT Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 10/20] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 11/20] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 12/20] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 13/20] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 14/20] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-08 14:57 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 15/20] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-08 15:03 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 16/20] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-08 15:25 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 17/20] i3c: mipi-i3c-hci: Factor out master dynamic address setting " Adrian Hunter
2026-01-08 15:28 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 18/20] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-08 15:09 ` Frank Li
2026-01-09 11:42 ` Adrian Hunter
2026-01-12 16:04 ` Frank Li
2026-01-08 8:05 ` Adrian Hunter [this message]
2026-01-08 15:15 ` [PATCH V2 19/20] i3c: mipi-i3c-hci: Add " Frank Li
2026-01-08 8:05 ` [PATCH V2 20/20] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-08 15:17 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260108080558.21767-20-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox