From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action
Date: Thu, 8 Jan 2026 10:05:45 +0200 [thread overview]
Message-ID: <20260108080558.21767-8-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260108080558.21767-1-adrian.hunter@intel.com>
The driver already uses devres for resource management, but the standard
resource-managed DMA allocation helpers cannot be used because they assume
the DMA device matches the managed device.
To address this, factor out the deallocation logic from hci_dma_cleanup()
into a new helper, hci_dma_free(), and register it as a devres action.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
Changes in V2:
Move hci_dma_free() below hci_dma_cleanup() to make patch look
better to review
Frank suggested using devm_add_action_and_reset() but it doesn't
work because the error path needs to call hci_dma_cleanup() before
hci_dma_free
drivers/i3c/master/mipi-i3c-hci/dma.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 54849aa98fad..4999cf3d9674 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -169,6 +169,22 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
rh_reg_write(CR_SETUP, 0);
rh_reg_write(IBI_SETUP, 0);
+ }
+
+ rhs_reg_write(CONTROL, 0);
+}
+
+static void hci_dma_free(void *data)
+{
+ struct i3c_hci *hci = data;
+ struct hci_rings_data *rings = hci->io_data;
+ struct hci_rh_data *rh;
+
+ if (!rings)
+ return;
+
+ for (int i = 0; i < rings->total; i++) {
+ rh = &rings->headers[i];
if (rh->xfer)
dma_free_coherent(rings->sysdev,
@@ -190,8 +206,6 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
kfree(rh->ibi_data);
}
- rhs_reg_write(CONTROL, 0);
-
kfree(rings);
hci->io_data = NULL;
}
@@ -359,10 +373,15 @@ static int hci_dma_init(struct i3c_hci *hci)
RING_CTRL_RUN_STOP);
}
+ ret = devm_add_action(hci->master.dev.parent, hci_dma_free, hci);
+ if (ret)
+ goto err_out;
+
return 0;
err_out:
hci_dma_cleanup(hci);
+ hci_dma_free(hci);
return ret;
}
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-08 8:06 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-08 8:05 [PATCH V2 00/20] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 01/20] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 02/20] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 03/20] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-08 14:52 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 04/20] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 05/20] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 06/20] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-08 8:05 ` Adrian Hunter [this message]
2026-01-08 14:56 ` [PATCH V2 07/20] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Frank Li
2026-01-08 8:05 ` [PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 09/20] i3c: mipi-i3c-hci: Introduce helper to restore DAT Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 10/20] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 11/20] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 12/20] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 13/20] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-08 8:05 ` [PATCH V2 14/20] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-08 14:57 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 15/20] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-08 15:03 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 16/20] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-08 15:25 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 17/20] i3c: mipi-i3c-hci: Factor out master dynamic address setting " Adrian Hunter
2026-01-08 15:28 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 18/20] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-08 15:09 ` Frank Li
2026-01-09 11:42 ` Adrian Hunter
2026-01-12 16:04 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 19/20] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-08 15:15 ` Frank Li
2026-01-08 8:05 ` [PATCH V2 20/20] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-08 15:17 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260108080558.21767-8-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox