[PATCH V2 08/20] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore

[Adrian Hunter <adrian.hunter@intel.com>]

Prepare for Runtime PM support, which requires restoring the Device Address
Table (DAT) registers after resume.  Maintain a copy of DAT in memory so it
can be reprogrammed when the controller is powered back up.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---


Changes in V2:

	Add Frank's Rev'd-by


 drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 29 +++++++++++++++++++-----
 drivers/i3c/master/mipi-i3c-hci/hci.h    |  6 +++++
 2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
index c60ef5d77ca3..644ab939be1c 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
@@ -34,13 +34,26 @@
 /*	DAT_0_IBI_PAYLOAD		W0_BIT_(12) */
 #define DAT_0_STATIC_ADDRESS		W0_MASK(6, 0)
 
-#define dat_w0_read(i)		readl(hci->DAT_regs + (i) * 8)
-#define dat_w1_read(i)		readl(hci->DAT_regs + (i) * 8 + 4)
-#define dat_w0_write(i, v)	writel(v, hci->DAT_regs + (i) * 8)
-#define dat_w1_write(i, v)	writel(v, hci->DAT_regs + (i) * 8 + 4)
+#define dat_w0_read(i)		hci->DAT[i].w0
+#define dat_w1_read(i)		hci->DAT[i].w1
+#define dat_w0_write(i, v)	hci_dat_w0_write(hci, i, v)
+#define dat_w1_write(i, v)	hci_dat_w1_write(hci, i, v)
+
+static inline void hci_dat_w0_write(struct i3c_hci *hci, int i, u32 v)
+{
+	hci->DAT[i].w0 = v;
+	writel(v, hci->DAT_regs + i * 8);
+}
+
+static inline void hci_dat_w1_write(struct i3c_hci *hci, int i, u32 v)
+{
+	hci->DAT[i].w1 = v;
+	writel(v, hci->DAT_regs + i * 8 + 4);
+}
 
 static int hci_dat_v1_init(struct i3c_hci *hci)
 {
+	struct device *dev = hci->master.dev.parent;
 	unsigned int dat_idx;
 
 	if (!hci->DAT_regs) {
@@ -54,9 +67,13 @@ static int hci_dat_v1_init(struct i3c_hci *hci)
 		return -EOPNOTSUPP;
 	}
 
-	if (!hci->DAT_data) {
-		struct device *dev = hci->master.dev.parent;
+	if (!hci->DAT) {
+		hci->DAT = devm_kcalloc(dev, hci->DAT_entries, hci->DAT_entry_size, GFP_KERNEL);
+		if (!hci->DAT)
+			return -ENOMEM;
+	}
 
+	if (!hci->DAT_data) {
 		/* use a bitmap for faster free slot search */
 		hci->DAT_data = devm_bitmap_zalloc(dev, hci->DAT_entries, GFP_KERNEL);
 		if (!hci->DAT_data)
diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
index fd08b701d094..aa8a03594e64 100644
--- a/drivers/i3c/master/mipi-i3c-hci/hci.h
+++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
@@ -31,6 +31,11 @@
 
 struct hci_cmd_ops;
 
+struct dat_words {
+	u32 w0;
+	u32 w1;
+};
+
 /* Our main structure */
 struct i3c_hci {
 	struct i3c_master_controller master;
@@ -51,6 +56,7 @@ struct i3c_hci {
 	unsigned int DAT_entries;
 	unsigned int DAT_entry_size;
 	void *DAT_data;
+	struct dat_words *DAT;
 	unsigned int DCT_entries;
 	unsigned int DCT_entry_size;
 	u8 version_major;
-- 
2.51.0


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c