From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V3 09/21] i3c: mipi-i3c-hci: Introduce helper to restore DAT
Date: Tue, 13 Jan 2026 09:26:50 +0200 [thread overview]
Message-ID: <20260113072702.16268-10-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260113072702.16268-1-adrian.hunter@intel.com>
Add a dedicated function to restore the Device Address Table (DAT) in
preparation for Runtime PM support. This will allow reprogramming the DAT
after the controller resumes from a low-power state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in V3:
None
Changes in V2:
Add Frank's Rev'd-by
drivers/i3c/master/mipi-i3c-hci/dat.h | 1 +
drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dat.h b/drivers/i3c/master/mipi-i3c-hci/dat.h
index 5277c65fc601..6881f19da77f 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat.h
+++ b/drivers/i3c/master/mipi-i3c-hci/dat.h
@@ -24,6 +24,7 @@ struct hci_dat_ops {
void (*set_flags)(struct i3c_hci *hci, unsigned int dat_idx, u32 w0, u32 w1);
void (*clear_flags)(struct i3c_hci *hci, unsigned int dat_idx, u32 w0, u32 w1);
int (*get_index)(struct i3c_hci *hci, u8 address);
+ void (*restore)(struct i3c_hci *hci);
};
extern const struct hci_dat_ops mipi_i3c_hci_dat_v1;
diff --git a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
index 644ab939be1c..852966aa20d9 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c
@@ -181,6 +181,14 @@ static int hci_dat_v1_get_index(struct i3c_hci *hci, u8 dev_addr)
return -ENODEV;
}
+static void hci_dat_v1_restore(struct i3c_hci *hci)
+{
+ for (int i = 0; i < hci->DAT_entries; i++) {
+ writel(hci->DAT[i].w0, hci->DAT_regs + i * 8);
+ writel(hci->DAT[i].w1, hci->DAT_regs + i * 8 + 4);
+ }
+}
+
const struct hci_dat_ops mipi_i3c_hci_dat_v1 = {
.init = hci_dat_v1_init,
.alloc_entry = hci_dat_v1_alloc_entry,
@@ -190,4 +198,5 @@ const struct hci_dat_ops mipi_i3c_hci_dat_v1 = {
.set_flags = hci_dat_v1_set_flags,
.clear_flags = hci_dat_v1_clear_flags,
.get_index = hci_dat_v1_get_index,
+ .restore = hci_dat_v1_restore,
};
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-13 7:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-13 7:26 [PATCH V3 00/21] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 01/21] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 02/21] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 03/21] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 04/21] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 05/21] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 06/21] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 07/21] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 08/21] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-13 7:26 ` Adrian Hunter [this message]
2026-01-13 7:26 ` [PATCH V3 10/21] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 11/21] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 12/21] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 13/21] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 14/21] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 15/21] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 16/21] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-13 16:27 ` Frank Li
2026-01-13 17:27 ` Adrian Hunter
2026-01-13 17:48 ` Frank Li
2026-01-13 7:26 ` [PATCH V3 17/21] i3c: mipi-i3c-hci: Allow core re-initialization for Runtime PM support Adrian Hunter
2026-01-13 16:31 ` Frank Li
2026-01-13 7:26 ` [PATCH V3 18/21] i3c: mipi-i3c-hci: Factor out master dynamic address setting into helper Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 19/21] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 20/21] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 21/21] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-14 16:44 ` [PATCH V3 00/21] " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260113072702.16268-10-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox