From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
Aniket <aniketmaurya@google.com>,
linux-i3c@lists.infradead.org
Subject: [PATCH V3 07/21] i3c: mipi-i3c-hci: Manage DMA deallocation via devres action
Date: Tue, 13 Jan 2026 09:26:48 +0200 [thread overview]
Message-ID: <20260113072702.16268-8-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260113072702.16268-1-adrian.hunter@intel.com>
The driver already uses devres for resource management, but the standard
resource-managed DMA allocation helpers cannot be used because they assume
the DMA device matches the managed device.
To address this, factor out the deallocation logic from hci_dma_cleanup()
into a new helper, hci_dma_free(), and register it as a devres action.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in V3:
Add Frank's Rev'd-by
Changes in V2:
Move hci_dma_free() below hci_dma_cleanup() to make patch look
better to review
Frank suggested using devm_add_action_and_reset() but it doesn't
work because the error path needs to call hci_dma_cleanup() before
hci_dma_free
drivers/i3c/master/mipi-i3c-hci/dma.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c
index 54849aa98fad..4999cf3d9674 100644
--- a/drivers/i3c/master/mipi-i3c-hci/dma.c
+++ b/drivers/i3c/master/mipi-i3c-hci/dma.c
@@ -169,6 +169,22 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
rh_reg_write(CR_SETUP, 0);
rh_reg_write(IBI_SETUP, 0);
+ }
+
+ rhs_reg_write(CONTROL, 0);
+}
+
+static void hci_dma_free(void *data)
+{
+ struct i3c_hci *hci = data;
+ struct hci_rings_data *rings = hci->io_data;
+ struct hci_rh_data *rh;
+
+ if (!rings)
+ return;
+
+ for (int i = 0; i < rings->total; i++) {
+ rh = &rings->headers[i];
if (rh->xfer)
dma_free_coherent(rings->sysdev,
@@ -190,8 +206,6 @@ static void hci_dma_cleanup(struct i3c_hci *hci)
kfree(rh->ibi_data);
}
- rhs_reg_write(CONTROL, 0);
-
kfree(rings);
hci->io_data = NULL;
}
@@ -359,10 +373,15 @@ static int hci_dma_init(struct i3c_hci *hci)
RING_CTRL_RUN_STOP);
}
+ ret = devm_add_action(hci->master.dev.parent, hci_dma_free, hci);
+ if (ret)
+ goto err_out;
+
return 0;
err_out:
hci_dma_cleanup(hci);
+ hci_dma_free(hci);
return ret;
}
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-13 7:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-13 7:26 [PATCH V3 00/21] i3c: mipi-i3c-hci-pci: Add Runtime PM support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 01/21] i3c: mipi-i3c-hci: Reset RING_OPERATION1 fields during init Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 02/21] i3c: mipi-i3c-hci: Ensure proper bus clean-up Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 03/21] i3c: master: Update hot-join flag only on success Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 04/21] i3c: master: Replace WARN_ON() with dev_err() in i3c_dev_free_ibi_locked() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 05/21] i3c: mipi-i3c-hci: Switch DAT bitmap allocation to devm_bitmap_zalloc() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 06/21] i3c: mipi-i3c-hci: Switch PIO data allocation to devm_kzalloc() Adrian Hunter
2026-01-13 7:26 ` Adrian Hunter [this message]
2026-01-13 7:26 ` [PATCH V3 08/21] i3c: mipi-i3c-hci: Cache DAT in memory for Runtime PM restore Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 09/21] i3c: mipi-i3c-hci: Introduce helper to restore DAT Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 10/21] i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init() Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 11/21] i3c: mipi-i3c-hci: Add DMA suspend and resume support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 12/21] i3c: mipi-i3c-hci: Refactor PIO register initialization Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 13/21] i3c: mipi-i3c-hci: Add PIO suspend and resume support Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 14/21] i3c: mipi-i3c-hci: Factor out software reset into helper Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 15/21] i3c: mipi-i3c-hci: Factor out IO mode setting " Adrian Hunter
2026-01-13 7:26 ` [PATCH V3 16/21] i3c: mipi-i3c-hci: Factor out core initialization " Adrian Hunter
2026-01-13 16:27 ` Frank Li
2026-01-13 17:27 ` Adrian Hunter
2026-01-13 17:48 ` Frank Li
2026-01-13 7:26 ` [PATCH V3 17/21] i3c: mipi-i3c-hci: Allow core re-initialization for Runtime PM support Adrian Hunter
2026-01-13 16:31 ` Frank Li
2026-01-13 7:26 ` [PATCH V3 18/21] i3c: mipi-i3c-hci: Factor out master dynamic address setting into helper Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 19/21] i3c: master: Introduce optional Runtime PM support Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 20/21] i3c: mipi-i3c-hci: Add " Adrian Hunter
2026-01-13 7:27 ` [PATCH V3 21/21] i3c: mipi-i3c-hci-pci: Add " Adrian Hunter
2026-01-14 16:44 ` [PATCH V3 00/21] " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260113072702.16268-8-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=aniketmaurya@google.com \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox