From: Adrian Hunter <adrian.hunter@intel.com>
To: alexandre.belloni@bootlin.com
Cc: Frank.Li@nxp.com, Wolfram Sang <wsa+renesas@sang-engineering.com>,
david.nystrom@est.tech, linux-i3c@lists.infradead.org
Subject: [PATCH V3 2/3] i3c: mipi-i3c-hci: Add optional System Suspend support
Date: Tue, 20 Jan 2026 20:37:34 +0200 [thread overview]
Message-ID: <20260120183735.60654-3-adrian.hunter@intel.com> (raw)
In-Reply-To: <20260120183735.60654-1-adrian.hunter@intel.com>
Add system suspend callbacks. Implement them by forcing runtime PM.
Consequently bail out if Runtime PM is not allowed.
On resume from System Suspend (suspend to RAM), rerun Dynamic Address
Assignment to restore addresses for devices that may have lost power.
On resume from System Hibernation (suspend to disk), use the new
i3c_master_do_daa_ext() helper with 'rstdaa' set to true, which
additionally handles the case where devices are assigned different dynamic
addresses after a hibernation boot.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in V3:
Rename 'restore' parameter to 'rstdaa'
Add Frank's Rev'd-by
Changes in V2:
Helper function is now called i3c_master_do_daa_ext() and takes
'restore' as an argument
drivers/i3c/master/mipi-i3c-hci/core.c | 49 ++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
index 02c5a133e329..e925584113d1 100644
--- a/drivers/i3c/master/mipi-i3c-hci/core.c
+++ b/drivers/i3c/master/mipi-i3c-hci/core.c
@@ -769,6 +769,49 @@ static int i3c_hci_runtime_resume(struct device *dev)
return 0;
}
+static int i3c_hci_suspend(struct device *dev)
+{
+ struct i3c_hci *hci = dev_get_drvdata(dev);
+
+ if (!(hci->quirks & HCI_QUIRK_RPM_ALLOWED))
+ return 0;
+
+ return pm_runtime_force_suspend(dev);
+}
+
+static int i3c_hci_resume_common(struct device *dev, bool rstdaa)
+{
+ struct i3c_hci *hci = dev_get_drvdata(dev);
+ int ret;
+
+ if (!(hci->quirks & HCI_QUIRK_RPM_ALLOWED))
+ return 0;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ ret = i3c_master_do_daa_ext(&hci->master, rstdaa);
+ if (ret)
+ dev_err(dev, "Dynamic Address Assignment failed on resume, error %d\n", ret);
+
+ /*
+ * I3C devices may have retained their dynamic address anyway. Do not
+ * fail the resume because of DAA error.
+ */
+ return 0;
+}
+
+static int i3c_hci_resume(struct device *dev)
+{
+ return i3c_hci_resume_common(dev, false);
+}
+
+static int i3c_hci_restore(struct device *dev)
+{
+ return i3c_hci_resume_common(dev, true);
+}
+
#define DEFAULT_AUTOSUSPEND_DELAY_MS 1000
static void i3c_hci_rpm_enable(struct device *dev)
@@ -945,6 +988,12 @@ static const struct platform_device_id i3c_hci_driver_ids[] = {
MODULE_DEVICE_TABLE(platform, i3c_hci_driver_ids);
static const struct dev_pm_ops i3c_hci_pm_ops = {
+ .suspend = pm_sleep_ptr(i3c_hci_suspend),
+ .resume = pm_sleep_ptr(i3c_hci_resume),
+ .freeze = pm_sleep_ptr(i3c_hci_suspend),
+ .thaw = pm_sleep_ptr(i3c_hci_resume),
+ .poweroff = pm_sleep_ptr(i3c_hci_suspend),
+ .restore = pm_sleep_ptr(i3c_hci_restore),
RUNTIME_PM_OPS(i3c_hci_runtime_suspend, i3c_hci_runtime_resume, NULL)
};
--
2.51.0
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-01-20 18:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 18:37 [PATCH V3 0/3] i3c: mipi-i3c-hci-pci: Add System Suspend support Adrian Hunter
2026-01-20 18:37 ` [PATCH V3 1/3] i3c: master: Add i3c_master_do_daa_ext() for post-hibernation address recovery Adrian Hunter
2026-01-20 20:28 ` Frank Li
2026-01-20 18:37 ` Adrian Hunter [this message]
2026-01-20 18:37 ` [PATCH V3 3/3] i3c: mipi-i3c-hci-pci: Add System Suspend support Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260120183735.60654-3-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=david.nystrom@est.tech \
--cc=linux-i3c@lists.infradead.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox