From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 29790D58CB0 for ; Sun, 22 Mar 2026 23:35:18 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:References: Message-ID:Subject:Cc:To:From:Date:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=UCGDydAdzfi9KM2NPCR5zOZ4cn84RMtYVeIxGfq6cr4=; b=Lr4Bhsn5h52mIq xMKTegnZVE8iHes8d5Bj7nQls/WCT5wtCo7XxR/p6dS8z+D7FOr1gHxqAjrXlvlGNwhHg90sj5OJf wElXPxnt3ki7fHDLyJiMOil35W/EH+WiSz1tMrojbb4MJ3lMVHbdl/Pqz0i7+FtnFaQAaaP1GwdG4 VfUKSSP2z5vfmmP6oUh+mDmvMfOjTz+mwjPw91cvAqqSUz/t3hGqGZ1/NqE4zO/p9lmVH0IZAax/+ 0QH9Fif0lZk6tcn1zNjXRwE4w3BwnOe5dyXbQqtvDEKz9nz3mN+/FEdNdb92gmQCjwSF0yfkxmZPB aGulVuzsaF7rDqwruHEA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1w4SKD-0000000FlBb-3pAK; Sun, 22 Mar 2026 23:35:17 +0000 Received: from sea.source.kernel.org ([172.234.252.31]) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1w4SKB-0000000FlBF-0zOZ for linux-i3c@lists.infradead.org; Sun, 22 Mar 2026 23:35:16 +0000 Received: from smtp.kernel.org (transwarp.subspace.kernel.org [100.75.92.58]) by sea.source.kernel.org (Postfix) with ESMTP id D992542E11; Sun, 22 Mar 2026 23:35:12 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 89799C19424; Sun, 22 Mar 2026 23:35:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1774222512; bh=Ri2XO0FRCm/AQC69Y7/yiRkrFDypS4Sf3lBTGwO2Cj0=; h=Date:From:To:Cc:Subject:References:In-Reply-To:From; b=AJjTBDiIGGTwBzFDT8QcTO/uzsuyg57sVwapN1/YeViEMULkUxLrBsq7pLiMNaukZ VInPeSdsAFQTF02mgA2VnOqFkf6ON6Z9ZV+t9ytZfMTRPvUuS8fIDvzdyuULSKfQKQ No0nUXY0ECd3hep+YmAllEOrKFrGnNudYFWZHNBre6BbI4SvlIqhwxR5s25vAMC+HC UIGf/NYPOgDkcSI+W9Xul0eazjllV7WI06pMicNKeNzJM9y2kLuhO25Bf6PbGSFoIQ Vna2pgjqKoxPZEyrXb9Py6FSbgv8s2yw85qiuGx/JHByxszJ219VifR8VIeKNCsVA/ KqhtR41+0ZJww== Date: Sun, 22 Mar 2026 18:35:11 -0500 From: Rob Herring To: Lakshay Piplani Cc: linux-kernel@vger.kernel.org, linux-i3c@lists.infradead.org, alexandre.belloni@bootlin.com, krzk+dt@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org, broonie@kernel.org, lee@kernel.org, Frank.Li@nxp.com, lgirdwood@gmail.com, vikash.bansal@nxp.com, priyanka.jain@nxp.com, aman.kumarpandey@nxp.com Subject: Re: [PATCH v7 3/7] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support Message-ID: <20260322233511.GA72130-robh@kernel.org> References: <20260319112441.3888957-1-lakshay.piplani@nxp.com> <20260319112441.3888957-4-lakshay.piplani@nxp.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20260319112441.3888957-4-lakshay.piplani@nxp.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260322_163515_340452_6D96CE92 X-CRM114-Status: GOOD ( 20.15 ) X-BeenThere: linux-i3c@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-i3c" Errors-To: linux-i3c-bounces+linux-i3c=archiver.kernel.org@lists.infradead.org On Thu, Mar 19, 2026 at 04:54:37PM +0530, Lakshay Piplani wrote: > From: Aman Kumar Pandey > > Add bindings for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) > multiport I3C hub family. These devices connect to a host via > I3C/I2C/SMBus and allow communication with multiple downstream > peripherals. > > Signed-off-by: Aman Kumar Pandey > Signed-off-by: Vikash Bansal > > --- > Changes in v7: > - Fix schema validation issues > - Adjust required properties > - Add I2C example > > Changes in v6: > - Use a vendor prefix for the attributes > > Changes in v5: > - Removed SW properties: cp0-ldo-microvolt,cp1-ldo-microvolt, > tp0145-ldo-microvolt, tp2367-ldo-microvolt > - Changed supply entries and its descriptions > > Changes in v4: > - Fixed DT binding check warning > - Removed SW properties: ibi-enable, local-dev, and always-enable > > Changes in v3: > - Added MFD (Multi-Function Device) support for I3C hub and on-die regulator > - Added Regulator supply node > > Changes in v2: > - Fixed DT binding check warning > - Revised logic for parsing DTS nodes > --- > --- > .../devicetree/bindings/i3c/nxp,p3h2840.yaml | 303 ++++++++++++++++++ > MAINTAINERS | 8 + > 2 files changed, 311 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml > > diff --git a/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml > new file mode 100644 > index 000000000000..495e0e4c1ae1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml > @@ -0,0 +1,303 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2025 NXP > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i3c/nxp,p3h2840.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP P3H2X4X I3C HUB > + > +maintainers: > + - Aman Kumar Pandey > + - Vikash Bansal > + > +description: | > + P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) is a family of multiport I3C > + hub devices that connect to:- > + 1. A host CPU via I3C/I2C/SMBus bus on upstream side and connect to multiple > + peripheral devices on the downstream side. > + 2. Have two Controller Ports which can support either > + I2C/SMBus or I3C buses and connect to a CPU, BMC or SOC. > + 3. P3H2840/ P3H2841 are 8 port I3C hub with eight I3C/I2C Target Port. > + 4. P3H2440/ P3H2441 are 4 port I3C hub with four I3C/I2C Target Port. > + Target ports can be configured as I2C/SMBus, I3C or GPIO and connect to > + peripherals. > + > +properties: > + compatible: > + const: nxp,p3h2840 > + > + reg: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + assigned-address: > + maximum: 0x7f > + > + nxp,tp0145-pullup-ohms: > + description: > + Selects the pull up resistance for target Port 0/1/4/5, in ohms. > + enum: [250, 500, 1000, 2000] > + default: 500 > + > + nxp,tp2367-pullup-ohms: > + description: > + Selects the pull up resistance for target Port 2/3/6/7, in ohms. > + enum: [250, 500, 1000, 2000] > + default: 500 > + > + nxp,cp0-io-strength-ohms: > + description: > + Selects the IO drive strength for controller Port 0, in ohms. > + enum: [20, 30, 40, 50] > + default: 20 > + > + nxp,cp1-io-strength-ohms: > + description: > + Selects the IO drive strength for controller Port 1, in ohms. > + enum: [20, 30, 40, 50] > + default: 20 > + > + nxp,tp0145-io-strength-ohms: > + description: > + Selects the IO drive strength for target port 0/1/4/5, in ohms. > + enum: [20, 30, 40, 50] > + default: 20 > + > + nxp,tp2367-io-strength-ohms: > + description: > + Selects the IO drive strength for target port 2/3/6/7, in ohms. > + enum: [20, 30, 40, 50] > + default: 20 > + > + vcc1-supply: > + description: Controller port 0 power supply. > + > + vcc2-supply: > + description: Controller port 1 power supply. > + > + vcc3-supply: > + description: Target port 0/1/4/5 power supply. > + > + vcc4-supply: > + description: Target port 2/3/6/7 power supply. > + > + regulators: > + type: object > + additionalProperties: false > + > + properties: > + ldo-cp0: > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + unevaluatedProperties: false > + > + ldo-cp1: > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + unevaluatedProperties: false > + > + ldo-tpg0: > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + unevaluatedProperties: false > + > + ldo-tpg1: > + type: object > + $ref: /schemas/regulator/regulator.yaml# > + unevaluatedProperties: false > + > +required: > + - reg > + > +patternProperties: > + "^i3c@[0-7]$": > + type: object > + unevaluatedProperties: false > + > + properties: > + reg: > + description: > + The I3C HUB Target Port number. > + maximum: 7 > + > + '#address-cells': > + const: 3 > + > + '#size-cells': > + const: 0 > + > + nxp,pullup-enable: > + type: boolean > + description: > + Enables the on-die pull-up for Target Port. > + > + required: > + - reg > + - "#address-cells" > + - "#size-cells" > + > + "^(i2c|smbus)@[0-7]$": > + type: object > + unevaluatedProperties: false > + > + properties: > + reg: > + description: > + The I3C HUB Target Port number. > + maximum: 7 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + nxp,pullup-enable: > + type: boolean > + description: > + Enables the on-die pull-up for Target Port. > + > + required: > + - reg > + - "#address-cells" > + - "#size-cells" > + > +unevaluatedProperties: false > + > +examples: > + - | > + i3c { > + #address-cells = <3>; > + #size-cells = <0>; > + > + hub@70,236153000c2 { > + reg = <0x70 0x236 0x3000c2>; Once again, you must have a compatible. "The device is discoverable" is not an argument. If it is discoverable, then don't put the device in DT in the first place. Rob -- linux-i3c mailing list linux-i3c@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-i3c