Linux-i3c Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Frank Li <Frank.Li@nxp.com>
Cc: linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] i3c: dw: reduce do_daa time if there's no client
Date: Fri, 14 Aug 2026 12:20:15 +0800	[thread overview]
Message-ID: <20260814042015.25397-1-jszhang@kernel.org> (raw)

dw_i3c_master_daa() derives the number of newly assigned dynamic
addresses from cmd->rx_len, the ISR sets it to the number of address
slots ENTDAA left unassigned. It starts out as zero, which already
means "every address was assigned", so a timed out transfer leaves
that value in place and it gets used as a result.

If there's no client connected, the addr assign cmd times out, then
the driver calls i3c_master_add_i3c_dev_locked() to add devices that
are not there, each costing about 1s, thus adds non necessary boot
time up to (maxdev * 1)s.

Start from maxdevs instead: no address is assigned before ENTDAA runs,
and make newdevs as 0 if the existing rx_len >= maxdevs.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---

since v1:
 - use another method to remove the non-necessary calling of
   i3c_master_add_i3c_dev_locked() if there's no client
 - update commit msg

 drivers/i3c/master/dw-i3c-master.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 1053cfb05c05..883b542c7bfc 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -876,6 +876,7 @@ static int dw_i3c_master_daa(struct i3c_master_controller *m)
 		goto rpm_out;
 	}
 	cmd = &xfer->cmds[0];
+	cmd->rx_len = master->maxdevs;
 	cmd->cmd_hi = COMMAND_PORT_TRANSFER_ARG;
 	cmd->cmd_lo = COMMAND_PORT_DEV_COUNT(master->maxdevs - pos) |
 		      COMMAND_PORT_DEV_INDEX(pos) |
@@ -888,7 +889,10 @@ static int dw_i3c_master_daa(struct i3c_master_controller *m)
 	if (!wait_for_completion_timeout(&xfer->comp, XFER_TIMEOUT))
 		dw_i3c_master_dequeue_xfer(master, xfer);
 
-	newdevs = GENMASK(master->maxdevs - cmd->rx_len - 1, 0);
+	if (cmd->rx_len >= master->maxdevs)
+		newdevs = 0;
+	else
+		newdevs = GENMASK(master->maxdevs - cmd->rx_len - 1, 0);
 	newdevs &= ~olddevs;
 
 	for (pos = 0; pos < master->maxdevs; pos++) {
-- 
2.51.0


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

                 reply	other threads:[~2026-08-14  4:39 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260814042015.25397-1-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=Frank.Li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox