* [PATCH v4 08/10] arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
[not found] <20250701-axiado-ax3000-soc-and-evaluation-board-support-v4-0-11ba6f62bf86@axiado.com>
2025-07-01 20:27 ` [PATCH v4 01/10] dt-bindings: vendor-prefixes: Add Axiado Corporation Harshit Shah
2025-07-01 20:27 ` [PATCH v4 06/10] dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller Harshit Shah
@ 2025-07-01 20:27 ` Harshit Shah
2025-07-02 6:20 ` Krzysztof Kozlowski
2025-07-01 20:27 ` [PATCH v4 10/10] MAINTAINERS: Add entry for Axiado Harshit Shah
` (2 subsequent siblings)
5 siblings, 1 reply; 8+ messages in thread
From: Harshit Shah @ 2025-07-01 20:27 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij,
Bartosz Golaszewski, Arnd Bergmann, Catalin Marinas, Will Deacon,
Jan Kotas, Greg Kroah-Hartman, Jiri Slaby, Michal Simek,
Przemysław Gaj, Alexandre Belloni, Frank Li, Boris Brezillon
Cc: devicetree, linux-kernel, linux-arm-kernel, linux-gpio, soc,
Jan Kotas, linux-serial, linux-i3c, Harshit Shah
Add initial device tree support for the AX3000 SoC and its evaluation
platform. The AX3000 is a multi-core SoC featuring 4 Cortex-A53 cores,
Secure Vault, AI Engine and Firewall.
It adds support for Cortex-A53 CPUs, timer, UARTs, and I3C
controllers on the AX3000 evaluation board.
Signed-off-by: Harshit Shah <hshah@axiado.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/axiado/Makefile | 2 +
arch/arm64/boot/dts/axiado/ax3000-evk.dts | 79 +++++
arch/arm64/boot/dts/axiado/ax3000.dtsi | 520 ++++++++++++++++++++++++++++++
4 files changed, 602 insertions(+)
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 79b73a21ddc22b17308554e502f8207392935b45..47dd8a1a7960d179ee28969a1d6750bfa0d73da1 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -9,6 +9,7 @@ subdir-y += amlogic
subdir-y += apm
subdir-y += apple
subdir-y += arm
+subdir-y += axiado
subdir-y += bitmain
subdir-y += blaize
subdir-y += broadcom
diff --git a/arch/arm64/boot/dts/axiado/Makefile b/arch/arm64/boot/dts/axiado/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..6676ad07db6129f8b333b0feffee705d272517c2
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AXIADO) += ax3000-evk.dtb
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
new file mode 100644
index 0000000000000000000000000000000000000000..92101c5b534bfac8b463adaa1c4f0d4367d01e21
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ax3000.dtsi"
+
+/ {
+ model = "Axiado AX3000 EVK";
+ compatible = "axiado,ax3000-evk", "axiado,ax3000";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* Cortex-A53 will use following memory map */
+ reg = <0x00000000 0x3d000000 0x00000000 0x23000000>,
+ <0x00000004 0x00000000 0x00000000 0x80000000>;
+ };
+};
+
+/* GPIO bank 0 - 7 */
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&gpio4 {
+ status = "okay";
+};
+
+&gpio5 {
+ status = "okay";
+};
+
+&gpio6 {
+ status = "okay";
+};
+
+&gpio7 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/axiado/ax3000.dtsi b/arch/arm64/boot/dts/axiado/ax3000.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..792f52e0c7dd42cbc54b0eb47e25b0fbf1a706b8
--- /dev/null
+++ b/arch/arm64/boot/dts/axiado/ax3000.dtsi
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021-25 Axiado Corporation (or its affiliates). All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/memreserve/ 0x3c0013a0 0x00000008; /* cpu-release-addr */
+/ {
+ model = "Axiado AX3000";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x3c0013a0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x100000>;
+ cache-unified;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ };
+ };
+
+ clocks {
+ clk_xin: clock-200000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "clk_xin";
+ };
+
+ refclk: clock-125000000 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic500>;
+
+ gic500: interrupt-controller@80300000 {
+ compatible = "arm,gic-v3";
+ reg = <0x00 0x80300000 0x00 0x10000>,
+ <0x00 0x80380000 0x00 0x80000>;
+ ranges;
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* GPIO Controller banks 0 - 7 */
+ gpio0: gpio-controller@80500000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80500000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio-controller@80580000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80580000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio2: gpio-controller@80600000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80600000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio3: gpio-controller@80680000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80680000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio4: gpio-controller@80700000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80700000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio5: gpio-controller@80780000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80780000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio6: gpio-controller@80800000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80800000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio7: gpio-controller@80880000 {
+ compatible = "axiado,ax3000-gpio", "cdns,gpio-r1p02";
+ reg = <0x00 0x80880000 0x00 0x400>;
+ clocks = <&refclk>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ /* I3C Controller 0 - 16 */
+ i3c0: i3c@80500400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80500400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c1: i3c@80500800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80500800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c2: i3c@80580400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80580400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c3: i3c@80580800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80580800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c4: i3c@80600400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80600400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c5: i3c@80600800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80600800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c6: i3c@80680400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80680400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c7: i3c@80680800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80680800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c8: i3c@80700400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80700400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c9: i3c@80700800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80700800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c10: i3c@80780400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80780400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c11: i3c@80780800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80780800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c12: i3c@80800400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80800400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c13: i3c@80800800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80800800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c14: i3c@80880400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80880400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c15: i3c@80880800 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80880800 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i3c16: i3c@80620400 {
+ compatible = "axiado,ax3000-i3c", "cdns,i3c-master";
+ reg = <0x00 0x80620400 0x00 0x400>;
+ clocks = <&refclk &clk_xin>;
+ clock-names = "pclk", "sysclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ i2c-scl-hz = <100000>;
+ i3c-scl-hz = <400000>;
+ #address-cells = <3>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart0: serial@80520000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80520000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart1: serial@805a0000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x805A0000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart2: serial@80620000 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80620000 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+
+ uart3: serial@80520800 {
+ compatible = "axiado,ax3000-uart", "cdns,uart-r1p12";
+ reg = <0x00 0x80520800 0x00 0x100>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "uart_clk", "pclk";
+ clocks = <&refclk &refclk>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
--
2.25.1
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
^ permalink raw reply related [flat|nested] 8+ messages in thread