linux-i3c.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Qasim Ijaz <qasdev00@gmail.com>
To: Frank Li <Frank.li@nxp.com>
Cc: miquel.raynal@bootlin.com, alexandre.belloni@bootlin.com,
	linux-i3c@lists.infradead.org, imx@lists.linux.dev,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] i3c: master: svc: fix signed/unsigned mismatch in dynamic address assignment
Date: Tue, 18 Mar 2025 14:41:47 +0000	[thread overview]
Message-ID: <Z9mGK0x8fsWvbTvo@qasdev.system> (raw)
In-Reply-To: <Z9l3waI5EdrWmYC3@lizhi-Precision-Tower-5810>

On Tue, Mar 18, 2025 at 09:40:17AM -0400, Frank Li wrote:
> On Mon, Mar 17, 2025 at 10:15:16AM +0000, Qasim Ijaz wrote:
> > svc_i3c_master_do_daa_locked() declares dyn_addr as an unsigned int
> > however it initialises it with i3c_master_get_free_addr() which
> > returns a signed int type and then attempts to check if dyn_addr is
> > less than 0. Unsigned integers cannot be less than 0, so the check
> > is essentially redundant. Furthermore i3c_master_get_free_addr()
> > could return -ENOMEM which an unsigned int cannot store.
> >
> > Fix this by capturing the return value of i3c_master_get_free_addr()
> > in a signed int ‘dyn_addr_ret’. If that value is negative, return
> > an error. Otherwise, assign it to the unsigned int ‘dyn_addr’ once
> > we know it’s valid.
> >
> > Fixes: 4008a74e0f9b ("i3c: master: svc: Fix npcm845 FIFO empty issue")
> > Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
> > ---
> 
> Thank you for your patch, but similar one was already applied
> https://lore.kernel.org/linux-i3c/174225158210.1593610.10018812780731849409.b4-ty@bootlin.com/T/#m5120e1c362e7e57f4cab139a45410fde421c2f37
>

Hi Frank 
 
I sent a fix for this issue on the 9th March, which is before the patch
you linked which was sent on the 10th March.

You can view my orignal patch here:

https://lore.kernel.org/all/20250309164314.15039-1-qasdev00@gmail.com/

Thanks
Qasim
> Frank
> >  drivers/i3c/master/svc-i3c-master.c | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
> > index f22fb9e75142..eea08f00d7ce 100644
> > --- a/drivers/i3c/master/svc-i3c-master.c
> > +++ b/drivers/i3c/master/svc-i3c-master.c
> > @@ -998,9 +998,10 @@ static int svc_i3c_master_do_daa_locked(struct svc_i3c_master *master,
> >  			 * filling within a few hundred nanoseconds, which is significantly
> >  			 * faster compared to the 64 SCL clock cycles.
> >  			 */
> > -			dyn_addr = i3c_master_get_free_addr(&master->base, last_addr + 1);
> > -			if (dyn_addr < 0)
> > +			int dyn_addr_ret = i3c_master_get_free_addr(&master->base, last_addr + 1);
> > +			if (dyn_addr_ret < 0)
> >  				return -ENOSPC;
> > +			dyn_addr = dyn_addr_ret;
> >
> >  			writel(dyn_addr, master->regs + SVC_I3C_MWDATAB);
> >
> > --
> > 2.39.5
> >

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply	other threads:[~2025-03-18 15:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-17 10:15 [PATCH] i3c: master: svc: fix signed/unsigned mismatch in dynamic address assignment Qasim Ijaz
2025-03-18 13:40 ` Frank Li
2025-03-18 14:41   ` Qasim Ijaz [this message]
2025-03-19 13:18     ` Frank Li
2025-03-20 22:01       ` Alexandre Belloni
  -- strict thread matches above, loose matches on Subject: below --
2025-03-09 16:43 Qasim Ijaz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z9mGK0x8fsWvbTvo@qasdev.system \
    --to=qasdev00@gmail.com \
    --cc=Frank.li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=imx@lists.linux.dev \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).