Linux-i3c Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Jorge Marques <jorge.marques@analog.com>
Cc: "Alexandre Belloni" <alexandre.belloni@bootlin.com>,
	"Przemysław Gaj" <pgaj@cadence.com>,
	linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] i3c: master: cdns: Use i3c_master_writesl and i3c_master_readsl
Date: Fri, 20 Jun 2025 14:46:11 -0400	[thread overview]
Message-ID: <aFWscxcJgXCVjE1B@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20250620-i3c-writesl-readsl-v1-2-e0aa1c014dff@analog.com>

On Fri, Jun 20, 2025 at 06:55:00PM +0200, Jorge Marques wrote:
> Use the inline write/read methods common to controllers that have a
> bus width of 32-bits.

Subject function need add "()".

i3c: master: cdns: Use i3c_master_writesl() and i3c_master_readsl()

Use common inline i3c_master_writesl()/i3c_master_readsl() methods to
simplify code since the FIFO of controller is a 32bit width.

Frank
>
> Signed-off-by: Jorge Marques <jorge.marques@analog.com>
> ---
>  drivers/i3c/master/i3c-master-cdns.c | 23 +++--------------------
>  1 file changed, 3 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/i3c/master/i3c-master-cdns.c b/drivers/i3c/master/i3c-master-cdns.c
> index fd3752cea654954ed1e37337754e45fddbbbf68e..6775751144ae86c1795abf45ceede17e1961bb74 100644
> --- a/drivers/i3c/master/i3c-master-cdns.c
> +++ b/drivers/i3c/master/i3c-master-cdns.c
> @@ -427,25 +427,13 @@ to_cdns_i3c_master(struct i3c_master_controller *master)
>  static void cdns_i3c_master_wr_to_tx_fifo(struct cdns_i3c_master *master,
>  					  const u8 *bytes, int nbytes)
>  {
> -	writesl(master->regs + TX_FIFO, bytes, nbytes / 4);
> -	if (nbytes & 3) {
> -		u32 tmp = 0;
> -
> -		memcpy(&tmp, bytes + (nbytes & ~3), nbytes & 3);
> -		writesl(master->regs + TX_FIFO, &tmp, 1);
> -	}
> +	i3c_master_writesl(master->regs + TX_FIFO, bytes, nbytes);
>  }
>
>  static void cdns_i3c_master_rd_from_rx_fifo(struct cdns_i3c_master *master,
>  					    u8 *bytes, int nbytes)
>  {
> -	readsl(master->regs + RX_FIFO, bytes, nbytes / 4);
> -	if (nbytes & 3) {
> -		u32 tmp;
> -
> -		readsl(master->regs + RX_FIFO, &tmp, 1);
> -		memcpy(bytes + (nbytes & ~3), &tmp, nbytes & 3);
> -	}
> +	i3c_master_readsl(master->regs + RX_FIFO, bytes, nbytes);
>  }
>
>  static bool cdns_i3c_master_supports_ccc_cmd(struct i3c_master_controller *m,
> @@ -1330,12 +1318,7 @@ static void cdns_i3c_master_handle_ibi(struct cdns_i3c_master *master,
>  	buf = slot->data;
>
>  	nbytes = IBIR_XFER_BYTES(ibir);
> -	readsl(master->regs + IBI_DATA_FIFO, buf, nbytes / 4);
> -	if (nbytes % 3) {
> -		u32 tmp = __raw_readl(master->regs + IBI_DATA_FIFO);
> -
> -		memcpy(buf + (nbytes & ~3), &tmp, nbytes & 3);
> -	}
> +	i3c_master_readsl(master->regs + IBI_DATA_FIFO, buf, nbytes);
>
>  	slot->len = min_t(unsigned int, IBIR_XFER_BYTES(ibir),
>  			  dev->ibi->max_payload_len);
>
> --
> 2.49.0
>
>

-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  reply	other threads:[~2025-06-20 18:46 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-20 16:54 [PATCH 0/3] Add helper methods i3c_master_writesl and i3c_master_readsl Jorge Marques
2025-06-20 16:54 ` [PATCH 1/3] i3c: master: Add inline i3c_master_readsl and i3c_master_writesl Jorge Marques
2025-06-20 18:41   ` Frank Li
2025-06-22  8:43     ` Jorge Marques
2025-06-20 21:15   ` Wolfram Sang
2025-06-22  8:31     ` Jorge Marques
2025-06-20 16:55 ` [PATCH 2/3] i3c: master: cdns: Use i3c_master_writesl and i3c_master_readsl Jorge Marques
2025-06-20 18:46   ` Frank Li [this message]
2025-06-20 16:55 ` [PATCH 3/3] i3c: master: dw: " Jorge Marques
2025-06-20 18:48   ` Frank Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aFWscxcJgXCVjE1B@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=jorge.marques@analog.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pgaj@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox