From: Frank Li <Frank.li@nxp.com>
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: alexandre.belloni@bootlin.com, linux-i3c@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper
Date: Tue, 12 May 2026 13:03:36 -0400 [thread overview]
Message-ID: <agNdaBruGi5a3tg2@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260504113352.38490-12-adrian.hunter@intel.com>
On Mon, May 04, 2026 at 02:33:47PM +0300, Adrian Hunter wrote:
> Factor the reset-and-restore sequence out of i3c_hci_rpm_resume() into
> a separate helper.
>
> This allows the same logic to be reused for recovery paths in subsequent
> changes without duplicating suspend/resume handling.
>
> No functional change.
>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
>
> Changes in V3:
>
> None
>
> Changes in V2:
>
> Drop redundant i3c_hci_sync_irq_inactive(hci)
> from i3c_hci_reset_and_restore() because it is called by
> hci->io->suspend() anyway
>
>
> drivers/i3c/master/mipi-i3c-hci/core.c | 19 +++++++++++++++++--
> drivers/i3c/master/mipi-i3c-hci/hci.h | 2 ++
> 2 files changed, 19 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i3c/master/mipi-i3c-hci/core.c b/drivers/i3c/master/mipi-i3c-hci/core.c
> index 8274c84b16be..12a0122fb709 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/core.c
> +++ b/drivers/i3c/master/mipi-i3c-hci/core.c
> @@ -798,9 +798,8 @@ int i3c_hci_rpm_suspend(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(i3c_hci_rpm_suspend);
>
> -int i3c_hci_rpm_resume(struct device *dev)
> +static int i3c_hci_do_reset_and_restore(struct i3c_hci *hci)
> {
> - struct i3c_hci *hci = dev_get_drvdata(dev);
> int ret;
>
> ret = i3c_hci_reset_and_init(hci);
> @@ -821,6 +820,22 @@ int i3c_hci_rpm_resume(struct device *dev)
>
> return 0;
> }
> +
> +int i3c_hci_reset_and_restore(struct i3c_hci *hci)
> +{
> + i3c_hci_bus_disable(hci);
> +
> + hci->io->suspend(hci);
> +
> + return i3c_hci_do_reset_and_restore(hci);
> +}
> +
> +int i3c_hci_rpm_resume(struct device *dev)
> +{
> + struct i3c_hci *hci = dev_get_drvdata(dev);
> +
> + return i3c_hci_do_reset_and_restore(hci);
> +}
> EXPORT_SYMBOL_GPL(i3c_hci_rpm_resume);
>
> static int i3c_hci_runtime_suspend(struct device *dev)
> diff --git a/drivers/i3c/master/mipi-i3c-hci/hci.h b/drivers/i3c/master/mipi-i3c-hci/hci.h
> index 97c31a315a6e..a3151c26827e 100644
> --- a/drivers/i3c/master/mipi-i3c-hci/hci.h
> +++ b/drivers/i3c/master/mipi-i3c-hci/hci.h
> @@ -175,4 +175,6 @@ int i3c_hci_process_xfer(struct i3c_hci *hci, struct hci_xfer *xfer, int n);
> int i3c_hci_rpm_suspend(struct device *dev);
> int i3c_hci_rpm_resume(struct device *dev);
>
> +int i3c_hci_reset_and_restore(struct i3c_hci *hci);
> +
> #endif
> --
> 2.51.0
>
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-05-12 17:03 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-04 11:33 [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 01/16] i3c: mipi-i3c-hci: Fix suspend behavior when bus disable falls back to software reset Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 02/16] i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 03/16] i3c: mipi-i3c-hci: Prevent DMA enqueue while ring is aborting or in error Adrian Hunter
2026-05-12 16:44 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 04/16] i3c: mipi-i3c-hci: Wait for DMA ring restart to complete Adrian Hunter
2026-05-12 16:45 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 05/16] i3c: mipi-i3c-hci: Move hci_dma_xfer_done() definition Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 06/16] i3c: mipi-i3c-hci: Call hci_dma_xfer_done() from dequeue path Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 07/16] i3c: mipi-i3c-hci: Complete transfer lists immediately on error Adrian Hunter
2026-05-12 16:46 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 08/16] i3c: mipi-i3c-hci: Avoid restarting DMA ring after aborting wrong transfer Adrian Hunter
2026-05-12 16:50 ` Frank Li
2026-05-15 5:30 ` Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 09/16] i3c: mipi-i3c-hci: Add DMA ring abort/reset quirk for Intel controllers Adrian Hunter
2026-05-12 16:53 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 10/16] i3c: mipi-i3c-hci: Add DMA ring abort " Adrian Hunter
2026-05-12 17:01 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 11/16] i3c: mipi-i3c-hci: Factor out reset-and-restore helper Adrian Hunter
2026-05-12 17:03 ` Frank Li [this message]
2026-05-04 11:33 ` [PATCH V3 12/16] i3c: mipi-i3c-hci: Add DMA-mode recovery for internal controller errors Adrian Hunter
2026-05-04 11:33 ` [PATCH V3 13/16] i3c: mipi-i3c-hci: Wait for NoOp commands to complete Adrian Hunter
2026-05-12 18:05 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 14/16] i3c: mipi-i3c-hci: Base timeouts on actual transfer start time Adrian Hunter
2026-05-12 18:11 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 15/16] i3c: mipi-i3c-hci: Consolidate DMA ring allocation Adrian Hunter
2026-05-12 18:15 ` Frank Li
2026-05-04 11:33 ` [PATCH V3 16/16] i3c: mipi-i3c-hci: Increase DMA transfer ring size to maximum Adrian Hunter
2026-05-12 18:15 ` Frank Li
2026-05-12 12:35 ` [PATCH V3 00/16] i3c: mipi-i3c-hci: DMA abort, recovery and related improvements Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=agNdaBruGi5a3tg2@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox