From: Frank Li <Frank.li@oss.nxp.com>
To: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: wsa+renesas@sang-engineering.com,
tommaso.merciai.xr@bp.renesas.com, alexandre.belloni@bootlin.com,
Frank.Li@nxp.com, p.zabel@pengutronix.de,
linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v5 01/17] i3c: renesas: Check that the transfer is valid before accessing it
Date: Mon, 13 Jul 2026 12:51:03 -0400 [thread overview]
Message-ID: <alUXd8KfIZnLKPR5@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260713130545.568657-2-claudiu.beznea+renesas@tuxon.dev>
On Mon, Jul 13, 2026 at 04:05:29PM +0300, Claudiu Beznea wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> The Renesas I3C driver uses an asynchronous model to transfer data. It
> prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
> The interrupt handler dequeues the transfer, updates/uses it, and signals
> the waiting thread.
>
> If the completion times out, the waiting thread dequeues the transfer and
> free it. If an interrupt fires after that, the handler may access freed
> memory, leading to crashes.
>
> Check that the transfer is still valid before accessing it in the
> interrupt handler. With it clear any status flags and disable all
> the interrupts to avoid triggering the same interrupts again.
>
> Fixes: d028219a9f14 ("i3c: master: Add basic driver for the Renesas I3C controller")
> Cc: stable@vger.kernel.org
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
>
> Changes in v5:
> - introduced renesas_i3c_irqs_mask_and_clear_locked() that keeps
> unified the IRQ mask and clean path
> - updated the patch description
>
> Changes in v4:
> - disable also the interrupts
> - dropped the Rb tag
>
> Changes in v3:
> - none
>
> Changes in v2:
> - clean the IRQ status bits before returning IRQ_HANDLED and adjusted the
> patch description to reflect this change
> - collected Frank's tag. Frank, please let me know if you consider
> I should drop your tag. Thanks!
>
> drivers/i3c/master/renesas-i3c.c | 52 +++++++++++++++++++++++++++-----
> 1 file changed, 45 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/i3c/master/renesas-i3c.c b/drivers/i3c/master/renesas-i3c.c
> index f39c449922ca..38b8428f464c 100644
> --- a/drivers/i3c/master/renesas-i3c.c
> +++ b/drivers/i3c/master/renesas-i3c.c
> @@ -433,6 +433,21 @@ static void renesas_i3c_enqueue_xfer(struct renesas_i3c *i3c, struct renesas_i3c
> }
> }
>
> +static void renesas_i3c_irqs_mask_and_clear_locked(struct renesas_i3c *i3c)
> +{
> + /* Disable all the interrupts. */
> + renesas_writel(i3c->regs, BIE, 0);
> + renesas_writel(i3c->regs, NTIE, 0);
> +
> + /* Clear normal transfer status flags. */
> + renesas_writel(i3c->regs, NTST, 0);
> +
> + /* Clear bus status flags. */
> + renesas_writel(i3c->regs, BST, 0);
> + /* Read back registers to confirm writes have fully propagated. */
> + renesas_readl(i3c->regs, BST);
> +}
> +
> static void renesas_i3c_wait_xfer(struct renesas_i3c *i3c, struct renesas_i3c_xfer *xfer)
> {
> unsigned long time_left;
> @@ -1014,6 +1029,11 @@ static irqreturn_t renesas_i3c_tx_isr(int irq, void *data)
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> xfer = i3c->xferqueue.cur;
> + if (!xfer) {
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> + return IRQ_HANDLED;
> + }
> +
> cmd = xfer->cmds;
>
> if (xfer->is_i2c_xfer) {
> @@ -1054,6 +1074,11 @@ static irqreturn_t renesas_i3c_resp_isr(int irq, void *data)
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> xfer = i3c->xferqueue.cur;
> + if (!xfer) {
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> + return IRQ_HANDLED;
> + }
> +
> cmd = xfer->cmds;
>
> /* Clear the Respone Queue Full status flag*/
> @@ -1138,6 +1163,11 @@ static irqreturn_t renesas_i3c_tend_isr(int irq, void *data)
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> xfer = i3c->xferqueue.cur;
> + if (!xfer) {
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> + return IRQ_HANDLED;
> + }
> +
> cmd = xfer->cmds;
>
> if (xfer->is_i2c_xfer) {
> @@ -1184,6 +1214,11 @@ static irqreturn_t renesas_i3c_rx_isr(int irq, void *data)
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> xfer = i3c->xferqueue.cur;
> + if (!xfer) {
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> + return IRQ_HANDLED;
> + }
> +
> cmd = xfer->cmds;
>
> if (xfer->is_i2c_xfer) {
> @@ -1234,15 +1269,13 @@ static irqreturn_t renesas_i3c_stop_isr(int irq, void *data)
> struct renesas_i3c_xfer *xfer;
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> - xfer = i3c->xferqueue.cur;
> -
> - /* read back registers to confirm writes have fully propagated */
> - renesas_writel(i3c->regs, BST, 0);
> - renesas_readl(i3c->regs, BST);
> - renesas_writel(i3c->regs, BIE, 0);
> - renesas_clear_bit(i3c->regs, NTST, NTST_TDBEF0 | NTST_RDBFF0);
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> renesas_clear_bit(i3c->regs, SCSTRCTL, SCSTRCTL_RWE);
>
> + xfer = i3c->xferqueue.cur;
> + if (!xfer)
> + return IRQ_HANDLED;
> +
> xfer->ret = 0;
> complete(&xfer->comp);
> }
> @@ -1259,6 +1292,11 @@ static irqreturn_t renesas_i3c_start_isr(int irq, void *data)
>
> scoped_guard(spinlock, &i3c->xferqueue.lock) {
> xfer = i3c->xferqueue.cur;
> + if (!xfer) {
> + renesas_i3c_irqs_mask_and_clear_locked(i3c);
> + return IRQ_HANDLED;
> + }
> +
> cmd = xfer->cmds;
>
> if (xfer->is_i2c_xfer) {
> --
> 2.43.0
>
--
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c
next prev parent reply other threads:[~2026-07-13 16:51 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 13:05 [PATCH v5 00/17] i3c: renesas: Suspend to RAM with power loss and runtime PM Claudiu Beznea
2026-07-13 13:05 ` [PATCH v5 01/17] i3c: renesas: Check that the transfer is valid before accessing it Claudiu Beznea
2026-07-13 13:24 ` sashiko-bot
2026-07-13 16:51 ` Frank Li [this message]
2026-07-13 13:05 ` [PATCH v5 02/17] i3c: renesas: Restore STDBR and EXTBR registers on resume Claudiu Beznea
2026-07-13 13:19 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 03/17] i3c: renesas: Follow the reset deassert order used in probe Claudiu Beznea
2026-07-13 13:14 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 04/17] i3c: renesas: Reconfigure the DATBAS register on re-attach Claudiu Beznea
2026-07-13 13:05 ` [PATCH v5 05/17] i3c: renesas: Reset the controller on resume Claudiu Beznea
2026-07-13 13:35 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 06/17] i3c: renesas: Perform Dynamic Address Assignment " Claudiu Beznea
2026-07-13 13:50 ` sashiko-bot
2026-07-13 16:59 ` Frank Li
2026-07-14 9:30 ` Claudiu Beznea
2026-07-14 18:57 ` Frank Li
2026-07-15 9:32 ` Claudiu Beznea
2026-07-15 16:47 ` Frank Li
2026-07-13 13:05 ` [PATCH v5 07/17] i3c: renesas: Clean DATBAS register on detach Claudiu Beznea
2026-07-13 13:45 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 08/17] i3c: renesas: Fix out-of-bounds access for newdevs mask Claudiu Beznea
2026-07-13 13:49 ` sashiko-bot
2026-07-13 17:01 ` Frank Li
2026-07-13 13:05 ` [PATCH v5 09/17] i3c: renesas: Use reset_control_bulk_{assert, deassert}() Claudiu Beznea
2026-07-13 17:02 ` Frank Li
2026-07-13 13:05 ` [PATCH v5 10/17] i3c: renesas: Return immediately if there is no transfer Claudiu Beznea
2026-07-13 14:04 ` sashiko-bot
2026-07-15 16:48 ` Frank Li
2026-07-13 13:05 ` [PATCH v5 11/17] i3c: renesas: Follow a unified pattern for transfer and command initialization Claudiu Beznea
2026-07-13 14:09 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 12/17] i3c: renesas: Drop the explicit memset() call Claudiu Beznea
2026-07-13 13:05 ` [PATCH v5 13/17] i3c: renesas: Update HW registers after SW computations are done Claudiu Beznea
2026-07-13 14:10 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 14/17] i3c: renesas: Organize structures to avoid unnecessary padding Claudiu Beznea
2026-07-13 14:15 ` sashiko-bot
2026-07-13 13:05 ` [PATCH v5 15/17] i3c: renesas: Use the "dev_name:irq_name" format for the interrupt name Claudiu Beznea
2026-07-13 13:05 ` [PATCH v5 16/17] i3c: renesas: Drop unnecessary tab Claudiu Beznea
2026-07-13 13:05 ` [PATCH v5 17/17] i3c: renesas: Add runtime PM support Claudiu Beznea
2026-07-13 14:33 ` sashiko-bot
2026-07-15 16:54 ` Frank Li
2026-07-16 9:33 ` Claudiu Beznea
2026-07-13 17:26 ` [PATCH v5 00/17] i3c: renesas: Suspend to RAM with power loss and runtime PM Tommaso Merciai
2026-07-20 16:58 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alUXd8KfIZnLKPR5@lizhi-Precision-Tower-5810 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-i3c@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=tommaso.merciai.xr@bp.renesas.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox