From: David Mosberger <davidm@napali.hpl.hp.com>
To: linux-ia64@vger.kernel.org
Subject: RE: flush_icache_range
Date: Thu, 02 Jun 2005 17:36:08 +0000 [thread overview]
Message-ID: <17055.17288.428883.146625@napali.hpl.hp.com> (raw)
In-Reply-To: <4236D7B5.8050408@bull.net>
>>>>> On Wed, 1 Jun 2005 20:00:30 -0700, "Jim Hull" <jim.hull@hp.com> said:
Jim> David:
>> If a CPU advertises an optimal stride-size of 128 bytes, that better
>> work for all CPUs in the system, even if the optimal stride for
>> another CPU is smaller, say 64 bytes.
Jim> Unfortunately, that's not how the ia64 architecture works.
Jim> Although the flushes are broadcast throughout the cache
Jim> coherence domain, the parameters returned by PAL are for that
Jim> specific processor only. This is because each PAL knows
Jim> nothing about the other (potentially heterogeneous) processors
Jim> - that depends on system knowledge.
Jim> Because there is no SAL interface to query all the PALs and
Jim> compute the minimum for you, this task falls on the OS to do.
Clearly PAL couldn't do that. What I had in mind was something else:
suppose you wanted to design a machine that can mix CPUs with L3
cache-line sizes of 128 and 256 bytes. In such a case, I'd have
_expected_ that either the 256 byte CPUs would also advertise a stride
of 128 (since they're designed to be backwards-compatible) or they
advertise a 256 byte stride but then take care of converting each "fc"
into a pair of 128-byte flushes on the bus.
I guess what you're saying is that the architecture imposes no such
constraint and the OS _must_ flush at the minium stride across all
CPUs. Right?
--david
next prev parent reply other threads:[~2005-06-02 17:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-15 12:40 flush_icache_range Zoltan Menyhart
2005-03-15 18:21 ` flush_icache_range David Mosberger
2005-03-16 10:58 ` flush_icache_range Zoltan Menyhart
2005-03-16 11:19 ` flush_icache_range Duraid Madina
2005-03-16 18:31 ` flush_icache_range David Mosberger
2005-05-20 14:17 ` flush_icache_range Zoltan Menyhart
2005-05-20 15:03 ` flush_icache_range David Mosberger
2005-05-23 13:43 ` flush_icache_range Zoltan Menyhart
2005-05-26 17:21 ` flush_icache_range David Mosberger
2005-05-26 17:39 ` flush_icache_range Seth, Rohit
2005-05-27 15:45 ` flush_icache_range Zoltan Menyhart
2005-05-27 15:56 ` flush_icache_range David Mosberger
2005-05-27 16:45 ` flush_icache_range Zoltan Menyhart
2005-05-27 16:55 ` flush_icache_range David Mosberger
2005-05-27 18:27 ` flush_icache_range Grant Grundler
2005-05-27 19:00 ` flush_icache_range Russ Anderson
2005-05-29 20:23 ` flush_icache_range Menyhart, Zoltan
2005-06-01 23:50 ` flush_icache_range David Mosberger
2005-06-02 3:00 ` flush_icache_range Jim Hull
2005-06-02 12:12 ` flush_icache_range Zoltan Menyhart
2005-06-02 14:25 ` flush_icache_range Zoltan Menyhart
2005-06-02 17:36 ` David Mosberger [this message]
2005-06-02 18:28 ` flush_icache_range David Mosberger
2005-06-02 18:31 ` flush_icache_range David Mosberger
2005-06-02 19:00 ` flush_icache_range Jim Hull
2005-06-02 21:37 ` flush_icache_range Menyhart, Zoltan
2005-06-02 22:23 ` flush_icache_range David Mosberger
2005-06-02 22:55 ` flush_icache_range Menyhart, Zoltan
2005-06-02 23:07 ` flush_icache_range David Mosberger
2005-06-03 12:35 ` flush_icache_range Zoltan Menyhart
2005-06-03 21:09 ` flush_icache_range David Mosberger
2005-06-13 11:20 ` flush_icache_range Zoltan Menyhart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17055.17288.428883.146625@napali.hpl.hp.com \
--to=davidm@napali.hpl.hp.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox