From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephane Eranian Date: Fri, 02 Apr 2004 17:07:48 +0000 Subject: Re: [Linux-ia64] elilo-3.0 PXE mode fix Message-Id: <20040402170748.GA688@frankl.hpl.hp.com> List-Id: References: <3AA03342E913FA4BA6D8BD0732BFC74B0547D016@pdsmsx402.pd.intel.com> In-Reply-To: <3AA03342E913FA4BA6D8BD0732BFC74B0547D016@pdsmsx402.pd.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ia64@vger.kernel.org Jack, On Fri, Apr 02, 2004 at 03:06:34PM +0800, Li, Jack wrote: > > I am also trying to setup PXE for IA64. Could you send a copy of your > pxe.conf file to me? And the boot strap you are using? Thanks. > I suggest you use elilo-3.4 instead of 3.0. The package contains an example of the dcph/pxe setup I used to test this. The problem was that the ISC DHCPD needed some extensions to support PXE/Ia64. Those extensions were added by Intel but I don't know if they ever made it into the official ISC DHCPD server, you'd have to check. Anyway, in the elilo-3.4 package, go to examples/netboot. You'll find a PXE config file. Hope this helps. PS: Brett Johnson is the new maintainer of the package and he has setup a SourceForge web for elilo: http://elilo.sf.net -- -Stephane