From: Martin Pool <mbp@sourcefrog.net>
To: linux-ia64@vger.kernel.org
Subject: oops in serial_out in 2.6.5
Date: Tue, 13 Apr 2004 06:37:58 +0000 [thread overview]
Message-ID: <20040413063757.GA11350@hp.com> (raw)
I'm (trying to) run Debian's 2.6.5-mckinley-smp on an hp rx2600. It
oopses at startup in setserial. The console is ttyS0, which points to
the management processor.
Loading the saved-state of the serial devices...
Cannot set serial info: Device or resource busy
/dev/ttyS0 at 0x0000 (irq = 49) is a 16550A
/dev/ttyS1 at 0x0000 (irq = 60) is a 16550A
Unable to handle kernel NULL pointer dereferencesetserial[203]: Oops 8804682956800 [1]
Pid: 203, CPU 0, comm: setserial
psr : 0000101008026018 ifs : 800000000000040a ip : [<a0000001002b8690>] Tainted: GF
ip is at serial_out+0xb0/0x1a0
unat: 0000000000000000 pfs : 000000000000038a rsc : 0000000000000003
rnat: 0000000000000040 bsps: e0000040fe1e4680 pr : a400000000169965
ldrs: 0000000000000000 ccv : 0000000000000002 fpsr: 0009804c0270033f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a0000001002bc890 b6 : a000000100002d70 b7 : a0000001002bc340
f6 : 1003ecccccccccccccccd f7 : 000000000000000000000
f8 : 1003e000000000101426b f9 : 1003e0000000005064c17
f10 : 1003e0000000051eb851f f11 : 1003e0000000000080000
r1 : a000000100790000 r2 : 0000000000000002 r3 : 0000000000000000
r8 : a0000001006b9373 r9 : a0000001006b9372 r10 : a000000100642820
r11 : a000000100642820 r12 : e00000405142fd70 r13 : e000004051428000
r14 : e00000405142fd80 r15 : a0000001006b9360 r16 : 0000000000000002
r17 : 0010000000000000 r18 : 0000000000000001 r19 : 0000000000000002
r20 : 0000000000000001 r21 : 0000000000000000 r22 : 0000000000000000
r23 : a0000001006428f8 r24 : a0000001006b935c r25 : a000000100642820
r26 : a000000100642820 r27 : e0000040509b3ab0 r28 : e00000405142fd88
r29 : e0000040509b3aa8 r30 : 0000000000000001 r31 : e00000405142fd84
Call Trace:
[<a000000100019800>] show_stack+0x80/0xa0
spà0000405142f940 bspà000040514292f8
[<a00000010003f910>] die+0x190/0x260
spà0000405142fb10 bspà000040514292c0
[<a000000100059e80>] ia64_do_page_fault+0x1e0/0x980
spà0000405142fb10 bspà00004051429258
[<a000000100011d20>] ia64_leave_kernel+0x0/0x280
spà0000405142fba0 bspà00004051429258
[<a0000001002b8690>] serial_out+0xb0/0x1a0
spà0000405142fd70 bspà00004051429208
[<a0000001002bc890>] serial8250_startup+0x550/0x6c0
spà0000405142fd70 bspà000040514291c8
[<a0000001002af980>] uart_startup+0x240/0x4e0
spà0000405142fd70 bspà00004051429178
[<a0000001002b1cf0>] uart_set_info+0x3f0/0xb20
spà0000405142fd90 bspà00004051429090
[<a0000001002b39f0>] uart_ioctl+0x2f0/0x3a0
spà0000405142fe20 bspà00004051429048
[<a0000001002841d0>] tty_ioctl+0x870/0xa60
spà0000405142fe20 bspà00004051428ff0
[<a000000100159850>] sys_ioctl+0x350/0x820
spà0000405142fe20 bspà00004051428f60
[<a000000100011b80>] ia64_ret_from_syscall+0x0/0x20
spà0000405142fe30 bspà00004051428f60
/dev/ttyS2 at 0x0000 (irq = 57) is a 16550A
/etc/rcS.d/S46setserial: line 152: 203 Segmentation fault ${SETSERIAL} -z $device $args
In case it helps here are some of the TOC dump fields:
<6>Entered OS INIT handler. PSPÿe301a0
Delaying for 5 seconds...
NaT bits 0000000000000000
pr 80000001ff606ca9
b0 a000000100018b90 ia64_pal_call_static+0x70/0xa0
ar.rsc 0000000000000003
cr.iip e00000003fae0da2 0xe00000003fae0da2
cr.ipsr 0000141008020018
cr.ifs 8000000000003060
xip a000000100018ba0 ia64_pal_call_static+0x80/0xa0
xpsr 0000101008026018
xfs 8000000000003060
b1 80000000ffe0d3d0 0x80000000ffe0d3d0
Backtrace of pid 204 (setserial)
Call Trace:
[<a000000100087520>] schedule+0x1080/0x1720
spà0000405142fda0 bspà00004051429208
[<a0000001000398e0>] __down_interruptible+0x280/0x460
spà0000405142fdb0 bspà00004051429190
[<a0000001002b57a0>] uart_get+0x340/0x380
spà0000405142fde0 bspà00004051429148
[<a0000001002b5860>] uart_open+0x80/0x320
spà0000405142fde0 bspà00004051429100
[<a000000100281ad0>] tty_open+0x550/0x8a0
spà0000405142fde0 bspà00004051429098
[<a000000100140b30>] chrdev_open+0x390/0x700
spà0000405142fdf0 bspà00004051429038
[<a000000100125560>] dentry_open+0x3a0/0x5a0
spà0000405142fe00 bspà00004051428fb8
[<a0000001001251a0>] filp_open+0xc0/0xe0
spà0000405142fe00 bspà00004051428f88
[<a000000100126030>] sys_open+0xb0/0x140
spà0000405142fe30 bspà00004051428f08
[<a000000100011b80>] ia64_ret_from_syscall+0x0/0x20
spà0000405142fe30 bspà00004051428f08
INIT dump complete. Please reboot now.
--
Martin
next reply other threads:[~2004-04-13 6:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-13 6:37 Martin Pool [this message]
2004-04-13 14:34 ` oops in serial_out in 2.6.5 Alex Williamson
2004-04-13 16:21 ` Matthew Wilcox
2004-04-13 23:55 ` Martin Pool
2004-04-14 15:25 ` Bjorn Helgaas
2004-04-15 2:35 ` Martin Pool
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040413063757.GA11350@hp.com \
--to=mbp@sourcefrog.net \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox