From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Randy.Dunlap" Date: Tue, 25 May 2004 15:02:09 +0000 Subject: Re: IA64 test report:USB mouse donesn't work : 2.4.26 /Lion Message-Id: <20040525080209.4ef5271a.rddunlap@osdl.org> List-Id: References: <6E0C289723A0564F9A8279E236E8565F0766858F@pdsmsx402.pd.intel.com> In-Reply-To: <6E0C289723A0564F9A8279E236E8565F0766858F@pdsmsx402.pd.intel.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: linux-ia64@vger.kernel.org On Tue, 25 May 2004 20:07:12 +0800 Yu, Luming wrote: |=20 | After executing kudzu, and removing the PS/2 mouse configuration, the | USB mouse works pretty well.(I'm sorry for I diden't notice this point | beofre.) | So this issue is gone.=20 |=20 | The interesting thing is that PS/2 and USB mouse can work together | under 2.6. But 2.4 cannot. =20 Interesting in what way? or do you mean on this particular platform? In general, it's expected that PS/2 and USB mice can and do work together, in 2.6 and 2.4. | Thanks, | Luming |=20 | >-----Original Message----- | >From: linux-ia64-owner@vger.kernel.org=20 | >[mailto:linux-ia64-owner@vger.kernel.org] On Behalf Of Wang, Zhenyu Z | >Sent: Thursday, May 13, 2004 4:05 PM | >To: linux-ia64@vger.kernel.org; Brown, Len | >Cc: linux-acpi | >Subject: IA64 test report:USB mouse donesn't work : 2.4.26=20 | >/Lion 2004-5-12: 9/10 pass | > | >ACPI Test Report for 2.4 ia64 kernel + latest ACPI | > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D| > Hardware Configuration: | > ----------------------- | > System Name: ACPI-LION | > System Type: 4 way 800M Itanium, Lion | > M/B revision: N/A | > Processor version: N/A | > Firmware Versions: N/A | > I/O configuration summary: | > QLogic QLA12160, Seagate ST39205LC boot drive | > IDE floppy and CDROM | > Serial console | > PS/2 keyboard and mouse | > USB mouse | > Ethernet Pro 100 | > | > Software Configuration: | > ----------------------- | > 1.Bk pull form lia64.bkbits.net/linux-ia64-2.4 on 4/28 | >(Shanghai time) | > 2.Bk pull from | >linux-acpi.bkbits.net/linux-acpi-test-2.4.26 on 4/28 (Shanghai time) | >=09 | > ACPI Features Tested: (prioritized). | > -------------------- | > 1. Boot off SCSI disk tested ok | > 2. PS/2 keyboard tested ok | > 3. ATI (run X window system) tested ok=20 | > 4. PS/2 mouse tested ok | > 5. USB mouse Doesn't work (Both | >CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed) | > 6. NIC (eg. Ping or ftp) tested ok | > 7. IDE (eg. r/w floppy or CDROM) tested ok | > 8. SCI (eg. Press power button) tested ok | > 9. Soft Power off tested ok | > 10. serial console tested ok=20 | > | >Linux version 2.4.26 (root@acpi-lion) (gcc version 3.2) #3 SMP Wed May | >12 22:39:29 CST 2004 | >EFI v1.02 by INTEL: SALsystab=3D0x5ff26170 ACPI=3D0x5fe963e8 ACPI | >2.0=3D0x5fe96630 MPS=3D0x5ffd0000 SMBIOS=3D0xf00a0 | >ACPI: RSDP (v002 INTEL ) @ | >0x000000005fe96630 | >ACPI: XSDT (v001 INTEL SR460AC 0x00000003 MSFT 0x0100000a) @ | >0x000000005fe96658 | >ACPI: FADT (v003 INTEL SR460AC 0x00000006 MSFT 0x0100000a) @ | >0x000000005fe96700 | >ACPI: MADT (v001 INTEL SR460AC 0x0000000a MSFT 0x0100000a) @ | >0x000000005fe96838 | >ACPI: DSDT (v001 INTEL SR460AC4 0x00000006 MSFT 0x0100000a) @ | >0x0000000000000000 | >efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0 | >efi.trim_top: ignoring 448KB of memory at 0x1000 due to granule hole at | >0x0 | >efi.trim_top: ignoring 4KB of memory at 0x71000 due to granule hole at | >0x0 | >efi.trim_top: ignoring 8KB of memory at 0x72000 due to granule hole at | >0x0 | >efi.trim_top: ignoring 100KB of memory at 0x87000 due to=20 | >granule hole at | >0x0 | >efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to granule | >hole at 0x0 | >SAL v3.00: oem=3DINTEL MSL REF SAL , product| >SAL: entry:= pal_proc=3D0x5ff48010, sal_proc=3D0x5feb53e0 | >SAL: Platform features BusLock IRQ_Redirection=20 | >SAL: AP wakeup using external interrupt vector 0xf0 | >booting generic kernel on platform dig | >CPU 0: 51 virtual and 44 physical address bits | >iosapic_system_init: Disabling PC-AT compatible 8259 interrupts | >ACPI: Local APIC address 0xc0000000fee00000 | >ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled) | >CPU 0 (0x0000) enabled (BSP) | >ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x03] lsapic_eid[0x00] enabled) | >CPU 1 (0x0300) enabled | >ACPI: LSAPIC (acpi_id[0x02] lsapic_id[0x01] lsapic_eid[0x00] enabled) | >CPU 2 (0x0100) enabled | >ACPI: LSAPIC (acpi_id[0x03] lsapic_id[0x02] lsapic_eid[0x00] enabled) | >CPU 3 (0x0200) enabled | >ACPI: LSAPIC (acpi_id[0x04] lsapic_id[0xaa] lsapic_eid[0x00] disabled) | >CPU 4 (0xaa00) disabled | >ACPI: LSAPIC (acpi_id[0x05] lsapic_id[0xaa] lsapic_eid[0x00] disabled) | >CPU 5 (0xaa00) disabled | >ACPI: LSAPIC (acpi_id[0x06] lsapic_id[0xaa] lsapic_eid[0x00] disabled) | >CPU 6 (0xaa00) disabled | >ACPI: LSAPIC (acpi_id[0x07] lsapic_id[0xaa] lsapic_eid[0x00] disabled) | >CPU 7 (0xaa00) disabled | >ACPI: IOSAPIC (id[0x4] global_irq_base[0x0] address[00000000fec00000]) | > IOSAPIC v2.1, address 0xfec00000, GSIs 0x0-0x3f | >ACPI: PLAT_INT_SRC (low edge type[0x1] id[0x0002] eid[0x0] | >iosapic_vector[0x2] global_irq[0x3d] | >PLATFORM int 0x1: GSI 0x3d(low,edge) -> CPU 0x0200 vector 2 | >ACPI: PLAT_INT_SRC (low level type[0x3] id[0x0002] eid[0x0] | >iosapic_vector[0x1e] global_irq[0x3c] | >PLATFORM int 0x3: GSI 0x3c(low,level) -> CPU 0x0200 vector 30 | >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | >register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level | >4 CPUs available, 8 CPUs total | >On node 0 totalpages: 96473 | >zone(0): 96473 pages. | >zone(1): 0 pages. | >zone(2): 0 pages. | >Building zonelist for node : 0 | >Kernel command line: BOOT_IMAGE=3Dscsi0:\EFI\redhat\vmlinux.24 | >root=3D/dev/sda2 console=3DttyS0,9600n8 console=3Dtty0 ro | >FPSWA interface at 0x5fb34010, revision 1.12 | >CPU 0: base freq=133.332MHz, ITC ratio=12/2, ITC freqy9.996MHz | >Console: colour VGA+ 80x25 | >Calibrating delay loop... 797.80 BogoMIPS | >Placing software IO TLB between 0xe000000001848000 - 0xe000000001a48000 | >Memory: 1533024k/1543568k available (5939k code, 10608k reserved, 2890k | >data, 512k init) | >Dentry cache hash table entries: 131072 (order: 7, 2097152 bytes) | >Inode cache hash table entries: 131072 (order: 7, 2097152 bytes) | >Mount cache hash table entries: 1024 (order: 0, 16384 bytes) | >Buffer cache hash table entries: 131072 (order: 6, 1048576 bytes) | >Page-cache hash table entries: 131072 (order: 6, 1048576 bytes) | >POSIX conformance testing by UNIFIX | >Boot processor id 0x0/0x0 | >SMP: starting up secondaries. | >CPU 1: 51 virtual and 44 physical address bits | >CPU 1: base freq=133.332MHz, ITC ratio=12/2, ITC freqy9.996MHz | >Calibrating delay loop... 797.80 BogoMIPS | >CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 558 | >cycles) | >CPU1: CPU has booted. | >CPU 2: 51 virtual and 44 physical address bits | >CPU 2: base freq=133.332MHz, ITC ratio=12/2, ITC freqy9.996MHz | >Calibrating delay loop... 797.80 BogoMIPS | >CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 558 | >cycles) | >CPU2: CPU has booted. | >CPU 3: 51 virtual and 44 physical address bits | >CPU 3: base freq=133.332MHz, ITC ratio=12/2, ITC freqy9.996MHz | >Calibrating delay loop... 797.80 BogoMIPS | >CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 558 | >cycles) | >CPU3: CPU has booted. | >Before bogomips. | >Total of 4 processors activated (3189.20 BogoMIPS). | >Waiting on wait_init_idle (map =3D 0xe) | >All processors have done init_idle | >ACPI: Subsystem revision 20040326 | >PCI: Using SAL to access configuration space | > tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully | >acquired | >Parsing all Control | >Methods:....................................................... | >......... | >............................................................... | >......... | >...................................... | >Table [DSDT](id F004) - 934 Objects with 101 Devices 174 Methods 19 | >Regions | >ACPI Namespace successfully loaded at root e000000004c23718 | >evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode | >successful | >evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE]=20 | >2 regs at | >0000000000000C0C on int 9 | >evgpeblk-0925 [06] ev_create_gpe_block : Found 2 Wake, Enabled 0 | >Runtime GPEs in this block | >evgpeblk-0867 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE]=20 | >2 regs at | >0000000000000C16 on int 9 | >evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 1 | >Runtime GPEs in this block | >Completing Region/Field/Buffer/Package | >initialization:..................................................... | >Initialized 19/19 Regions 0/0 Fields 24/24 Buffers 10/12 Packages (943 | >nodes) | >Executing all Device _STA and_INI | >methods:....................................................... | >......... | >.................................. | >98 Devices found containing: 98 _STA, 7 _INI methods | >ACPI: Interpreter enabled | >ACPI: Using IOSAPIC for interrupt routing | >ACPI: System [ACPI] (supports S0 S4 S5) | >ACPI: PCI Root Bridge [PCI0] (00:00) | >alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] | >ACPI: Power Resource [URP1] (off) | >ACPI: Power Resource [URP2] (off) | >ACPI: Power Resource [FDDP] (off) | >ACPI: Power Resource [LPTP] (off) | >ACPI: PCI Root Bridge [PCI1] (00:01) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] | >ACPI: PCI Root Bridge [PCI2] (00:04) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] | >ACPI: PCI Root Bridge [PCI3] (00:08) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT] | >ACPI: PCI Root Bridge [PCI4] (00:0c) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT] | >ACPI: PCI Root Bridge [PCI5] (00:0f) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI5._PRT] | >ACPI: PCI Root Bridge [PCI6] (00:12) | >ACPI: PCI Interrupt Routing Table [\_SB_.PCI6._PRT] | >ACPI: PCI Root Bridge [CBN] (00:15) | >PCI->APIC IRQ transform: (00:03.2 INTD) -> CPU 0x0000 vector 48 | >PCI: no interrupt route for 00:00:03 pin B | >PCI->APIC IRQ transform: (00:05.0 INTA) -> CPU 0x0000 vector 49 | >PCI->APIC IRQ transform: (00:06.0 INTA) -> CPU 0x0000 vector 50 | >PCI->APIC IRQ transform: (01:02.0 INTA) -> CPU 0x0000 vector 51 | >PCI->APIC IRQ transform: (01:0f.0 INTA) -> CPU 0x0000 vector 52 | >PCI->APIC IRQ transform: (04:0f.0 INTA) -> CPU 0x0000 vector 52 | >PCI->APIC IRQ transform: (08:0f.0 INTA) -> CPU 0x0000 vector 53 | >PCI->APIC IRQ transform: (0c:0f.0 INTA) -> CPU 0x0000 vector 53 | >PCI->APIC IRQ transform: (0f:0f.0 INTA) -> CPU 0x0000 vector 54 | >PCI->APIC IRQ transform: (12:0f.0 INTA) -> CPU 0x0000 vector 54 | >Linux NET4.0 for Linux 2.4 | >Based upon Swansea University Computer Society NET3.039 | >Initializing RT netlink socket | >PAL Information Facility v0.5 | >EFI Variables Facility v0.06 2002-Dec-10 | >Total HugeTLB memory allocated, 0 | >Starting kswapd | >Journalled Block Device driver loaded | >Hugetlbfs mounted. | >Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | >ACPI: Power Button (FF) [PWRF] | >ACPI: Processor [CPU0] (supports C1) | >ACPI: Processor [CPU1] (supports C1) | >ACPI: Processor [CPU2] (supports C1) | >ACPI: Processor [CPU3] (supports C1) | >pty: 256 Unix98 ptys configured | >Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ | >DETECT_IRQ SERIAL_PCI SERIAL_ACPI enabled | >ttyS00 at 0x03f8 (irq =3D 44) is a 16550A | >ttyS01 at 0x02f8 (irq =3D 45) is a 16550A | >ttyS00 at port 0x03f8 (irq =3D 44) is a 16550A | >ttyS01 at port 0x02f8 (irq =3D 45) is a 16550A | >EFI Time Services Driver v0.4 | >loop: loaded (max 8 devices) | >Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 | >Copyright (c) 1999-2004 Intel Corporation. | >eepro100.c:v1.09j-t 9/29/99 Donald Becker | >http://www.scyld.com/network/eepro100.html | >eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V.=20 | >Savochkin | > and others | >PCI: Found IRQ 49 for device 00:05.0 | >eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:F9:F4:F6, IRQ | >49. | > Board assembly 727095-004, Physical connectors present: RJ45 | > Primary interface chip i82555 PHY #1. | > General self-test: passed. | > Serial sub-system self-test: passed. | > Internal registers self-test: passed. | > ROM checksum self-test: passed (0x04f4518b). | >Linux agpgart interface v0.99 (c) Jeff Hartmann | >agpgart: Maximum main memory to use for agp memory: 1403M | >agpgart: no supported devices found. | >[drm] Initialized r128 2.2.0 20010917 on minor 0 | >[drm] Initialized radeon 1.7.0 20020828 on minor 1 | >Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 | >ide: Assuming 33MHz system bus speed for PIO modes; override with | >idebus=3Dxx | >PIIX4: IDE controller at PCI slot 00:03.1 | >PCI: Found IRQ 0 for device 00:03.1 | >PIIX4: chipset revision 1 | >PIIX4: not 100% native mode: will probe irqs later | > ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio | > ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio | >hda: LS-120 S200 01 UHD Floppy, ATAPI FLOPPY drive | >hdc: CD-224E, ATAPI CD/DVD-ROM drive | >global_restore_flags: 10084a6010 (e000000004ab2490) | >ide0 at 0x1f0-0x1f7,0x3f6 on irq 34 | >global_restore_flags: 10084a2010 (e000000004ab2490) | >ide1 at 0x170-0x177,0x376 on irq 33 | >hdc: attached ide-cdrom driver. | >hdc: ATAPI 24X CD-ROM drive, 128kB Cache | >Uniform CD-ROM driver Revision: 3.12 | >hda: attached ide-floppy driver. | >hda: No disk in drive | >hda: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm | >SCSI subsystem driver Revision: 1.00 | >PCI: Found IRQ 51 for device 01:02.0 | >qla1280: QLA12160 found on PCI bus 1, dev 2 | >scsi(0): Reading NVRAM | >scsi(0:0): Resetting SCSI BUS | >scsi(0:1): Resetting SCSI BUS | >PCI: Found IRQ 51 for device 01:02.0 | >scsi0 : QLogic QLA12160 PCI to SCSI Host Adapter: bus 1 device 2 irq 51 | > Firmware version: 10.04.32, Driver version 3.23.37 | > Vendor: SEAGATE Model: ST39205LC Rev: 5063 | > Type: Direct-Access ANSI SCSI revision: 03 | >scsi(0:0:0:0): Sync: period 9, offset 24, Wide, DT, Tagged queuing: | >depth 255 | >scsi1 : SCSI host adapter emulation for IDE ATAPI devices | >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 | >SCSI device sda: 17921835 512-byte hdwr sectors (9176 MB) | >Partition check: | > sda: sda1 sda2 sda3 | >Fusion MPT base driver 2.05.11.03 | >Copyright (c) 1999-2003 LSI Logic Corporation | >mptbase: 0 MPT adapters found, 0 installed. | >Fusion MPT SCSI Host driver 2.05.11.03 | >cs4281: version v1.30.64 time 22:37:08 May 12 2004 | >cs4281: Unable to locate any cs4281 device with valid IDs 0x1013-0x6005 | >usb.c: registered new driver usbdevfs | >usb.c: registered new driver hub | >host/usb-uhci.c: $Revision: 1.275 $ time 22:37:51 May 12 2004 | >host/usb-uhci.c: High bandwidth mode enabled | >PCI: Found IRQ 48 for device 00:03.2 | >host/usb-uhci.c: USB UHCI at I/O 0x6f80, IRQ 48 | >host/usb-uhci.c: Detected 2 ports | >usb.c: new USB bus registered, assigned bus number 1 | >hub.c: USB hub found | >hub.c: 2 ports detected | >host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver | >usb.c: registered new driver hiddev | >usb.c: registered new driver hid | >hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik | >hid-core.c: USB HID support drivers | >Linux video capture interface: v1.00 | >mice: PS/2 mouse device common for all mice | >NET4: Linux TCP/IP 1.0 for NET4.0 | >IP Protocols: ICMP, UDP, TCP | >IP: routing cache hash table of 32768 buckets, 512Kbytes | >TCP: Hash tables configured (established 262144 bind 65536) | >NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. | >EXT3-fs: INFO: recovery required on readonly filesystem. | >EXT3-fs: write access will be enabled during recovery. | >hub.c: new USB device 00:03.2-2, assigned address 2 | >host/usb-uhci.c: interrupt, status 2, frame# 1236 | >input: USB HID v1.00 Mouse [413c:3010] on usb1:2.0 | >(recovery.c, 256): journal_recover: JBD: recovery, exit status 0, | >recovered transactions 675565 to 675973 | >(recovery.c, 258): journal_recover: JBD: Replayed 2841 and revoked 7/12 | >blocks | >kjournald starting. Commit interval 5 seconds | >EXT3-fs: recovery complete. | >EXT3-fs: mounted filesystem with ordered data mode. | >VFS: Mounted root (ext3 filesystem) readonly. | >Freeing unused kernel memory: 512kB freed | >EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal | >Adding Swap: 2040208k swap-space (priority -1) | >ide-floppy: hda: I/O error, pc =3D 0, key =3D 2, asc =3D 3a, ascq =3D = 0 | >usb.c: USB disconnect on device 00:03.2-2 address 2 | >ide-floppy: hda: I/O error, pc =3D 1b, key =3D 2, asc =3D 3a, ascq =3D = 0 | >hda: No disk in drive | >hub.c: new USB device 00:03.2-1, assigned address 3 | >host/usb-uhci.c: interrupt, status 2, frame# 792 | >input: USB HID v1.00 Mouse [413c:3010] on usb1:3.0 | >ide-floppy: hda: I/O error, pc =3D 0, key =3D 2, asc =3D 3a, ascq =3D = 0 | >ide-floppy: hda: I/O error, pc =3D 1b, key =3D 2, asc =3D 3a, ascq =3D = 0 | >hda: No disk in drive | >usb.c: USB disconnect on device 00:03.2-1 address 3 | >hub.c: new USB device 00:03.2-2, assigned address 4 | >host/usb-uhci.c: interrupt, status 2, frame# 1899 | >input: USB HID v1.00 Mouse [413c:3010] on usb1:4.0 | >ide-floppy: hda: I/O error, pc =3D 0, key =3D 2, asc =3D 3a, ascq =3D = 0 | >ide-floppy: hda: I/O error, pc =3D 1b, key =3D 2, asc =3D 3a, ascq =3D = 0 | >hda: No disk in drive | >ide-floppy: hda: I/O error, pc =3D 0, key =3D 2, asc =3D 3a, ascq =3D = 0 | >ide-floppy: hda: I/O error, pc =3D 1b, key =3D 2, asc =3D 3a, ascq =3D = 0 | >hda: No disk in drive | >ide-floppy: hda: I/O error, pc =3D 0, key =3D 2, asc =3D 3a, ascq =3D = 0 | >ide-floppy: hda: I/O error, pc =3D 1b, key =3D 2, asc =3D 3a, ascq =3D = 0 | >hda: No disk in drive | >hda: 1440kB, 2880 blocks, 512 sector size | >hda: 1440kB, 80/2/18 CHS, 150 kBps, 512 sector size, 720 rpm | > hda: | > hda: | > hda: | > hda: | > hda: | > | > CPU0 CPU1 CPU2 CPU3 =20 | > 32: 2159 0 12 6 IO-SAPIC-edge | >keyboard | > 33: 988 2 30 6 IO-SAPIC-edge ide1 | > 34: 319 11 13 2 IO-SAPIC-edge ide0 | > 39: 0 0 0 0 IO-SAPIC-level acpi | > 44: 5431 0 11 0 =20 | >IO-SAPIC-edge serial | > 45: 17 0 0 0 =20 | >IO-SAPIC-edge serial | > 48: 33 0 0 0 IO-SAPIC-level | >usb-uhci | > 49: 2413 9 60 16 IO-SAPIC-level eth0 | > 51: 7216 8 343 65 IO-SAPIC-level | >qla1280 | >239: 1350648 1349963 1349429 1340144 LSAPIC timer | >254: 58 18 55 37 LSAPIC IPI | >NMI: 0 0 0 0=20 | >ERR: 0 | > | >00:03.0 ISA bridge: Intel Corp. 82372FB PIIX5 ISA (rev 01) | > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- | >ParErr- Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 0 | > | >00:03.1 IDE interface: Intel Corp. 82372FB PIIX5 IDE (rev 01) (prog-if | >80 [Master]) | > Subsystem: Intel Corp.: Unknown device 414c | > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 64 | > Region 4: I/O ports at 1000 [size=16] | > | >00:03.2 USB Controller: Intel Corp. 82372FB PIIX5 USB (rev 01) (prog-if | >00 [UHCI]) | > Subsystem: Intel Corp.: Unknown device 414c | > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 64 | > Interrupt: pin D routed to IRQ 48 | > Region 4: I/O ports at 6f80 [size2] | > | >00:03.3 SMBus: Intel Corp. 82372FB PIIX5 SMBus (rev 01) | > Subsystem: Intel Corp.: Unknown device 414c | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin B routed to IRQ 0 | > Region 4: I/O ports at c000 [disabled] [size=16] | > | >00:04.0 PIC: Intel Corp. 683053 Programmable Interrupt Device (rev 01) | >(prog-if 20 [IO(X)-APIC]) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 0 (2000ns min, 2000ns max) | > | >00:05.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] | >(rev 08) | > Subsystem: Intel Corp. 82559 Fast Ethernet LAN on Motherboard | > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 | > Interrupt: pin A routed to IRQ 49 | > Region 0: Memory at 00000000fafe0000 (32-bit, non-prefetchable) | >[size=3D4K] | > Region 1: I/O ports at 6f00 [sized] | > Region 2: Memory at 00000000fae00000 (32-bit, non-prefetchable) | >[size=3D1M] | > Capabilities: [dc] Power Management version 2 | > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=3D0mA | >PME(D0+,D1+,D2+,D3hot+,D3cold+) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D2 PME- | > | >00:06.0 VGA compatible controller: ATI Technologies Inc Rage=20 | >XL (rev 27) | >(prog-if 00 [VGA]) | > Subsystem: Intel Corp.: Unknown device 414c | > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping+ SERR- FastB2B- | > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 64 (2000ns min), cache line size 10 | > Interrupt: pin A routed to IRQ 50 | > Region 0: Memory at 00000000fb000000 (32-bit, non-prefetchable) | >[size=16M] | > Region 1: I/O ports at 6800 [size%6] | > Region 2: Memory at 00000000faff0000 (32-bit, non-prefetchable) | >[size=3D4K] | > Expansion ROM at 00000000fafc0000 [disabled] [size=128K] | > Capabilities: [5c] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >00:10.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >01:02.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel | >Ultra3 SCSI Processor (rev 06) | > Subsystem: QLogic Corp.: Unknown device 0007 | > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 64 (16000ns min), cache line size 10 | > Interrupt: pin A routed to IRQ 51 | > Region 0: I/O ports at 8800 [size%6] | > Region 1: Memory at 00000000f1ff0000 (32-bit, non-prefetchable) | >[size=3D4K] | > Expansion ROM at 00000000f1fc0000 [disabled] [size=128K] | > Capabilities: [44] Power Management version 1 | > Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >01:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 52 | > Region 0: Memory at 00000000f1fe0000 (32-bit, non-prefetchable) | >[size%6] | > | >04:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 52 | > Region 0: Memory at 00000000e7ff0000 (32-bit, non-prefetchable) | >[size%6] | > | >08:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 53 | > Region 0: Memory at 00000000ddff0000 (32-bit, non-prefetchable) | >[size%6] | > | >0c:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 53 | > Region 0: Memory at 00000000d5ff0000 (32-bit, non-prefetchable) | >[size%6] | > | >0f:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 54 | > Region 0: Memory at 00000000cdff0000 (32-bit, non-prefetchable) | >[size%6] | > | >12:0f.0 PCI Hot-plug controller: Intel Corp. 82466GX=20 | >Integrated Hot-Plug | >Controller (IHPC) (rev 01) | > Subsystem: Intel Corp.: Unknown device 012b | > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Interrupt: pin A routed to IRQ 54 | > Region 0: Memory at 00000000c5ff0000 (32-bit, non-prefetchable) | >[size%6] | > | >15:00.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.1 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.2 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.3 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.4 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.5 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.6 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:00.7 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.1 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.2 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.3 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.4 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.5 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.6 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:01.7 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:04.0 Host bridge: Intel Corp. 460GX - 84460GX System Data Controller | >(SDC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Data Controller | >(SDC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:10.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:10.1 Host bridge: Intel Corp. 450NX - 82454NX/84460GX PCI Expander | >Bridge (rev 05) | > Subsystem: Intel Corp. 450NX - 82454NX/84460GX PCI Expander | >Bridge | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 128, cache line size 10 | > | >15:11.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:12.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:12.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >15:13.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:13.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >15:14.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:14.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >15:15.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:15.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >15:16.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:16.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | > | >15:17.0 Host bridge: Intel Corp. 460GX - 84460GX System Address | >Controller (SAC) (rev 03) | > Subsystem: Intel Corp. 460GX - 84460GX System Address Controller | >(SAC) | > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- | >ParErr- Stepping- SERR- FastB2B- | > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=FAst >TAbort- | >SERR- | >15:17.1 Host bridge: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) (rev 07) | > Subsystem: Intel Corp. 460GX - 82466GX Wide and fast PCI | >eXpander Bridge (WXB) | > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- | >ParErr+ Stepping- SERR+ FastB2B- | > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- | >SERR- Latency: 32, cache line size 10 | > Capabilities: [90] Power Management version 2 | > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=3D0mA | >PME(D0-,D1-,D2-,D3hot-,D3cold-) | > Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- | >- | >To unsubscribe from this list: send the line "unsubscribe=20 | >linux-ia64" in | >the body of a message to majordomo@vger.kernel.org | >More majordomo info at http://vger.kernel.org/majordomo-info.html | > | - | To unsubscribe from this list: send the line "unsubscribe linux-ia64" in | the body of a message to majordomo@vger.kernel.org | More majordomo info at http://vger.kernel.org/majordomo-info.html -- ~Randy