public inbox for linux-ia64@vger.kernel.org
 help / color / mirror / Atom feed
From: Jesse Barnes <jbarnes@engr.sgi.com>
To: linux-ia64@vger.kernel.org
Subject: [PATCH] update sn2_defconfig to include new console
Date: Sat, 17 Jul 2004 21:04:08 +0000	[thread overview]
Message-ID: <200407171704.08219.jbarnes@engr.sgi.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 484 bytes --]

Now that Linus' tree has the new sn2 console driver, make sn2_defconfig enable 
it by default.  The device is major 204, minor 40.  Note that you'll probably 
have to update your elilo.conf and inittab to use the new driver, as it's 
called ttySG0 rather than ttyS0.

David, can you send this update to Linus along with whatever else you're going 
to have him pull for 2.6.8?  That'll keep things from being inconsistent.

Signed-off-by: Jesse Barnes <jbarnes@sgi.com>

Thanks,
Jesse

[-- Attachment #2: sn2-defconfig-console.patch --]
[-- Type: text/x-diff, Size: 2033 bytes --]

===== arch/ia64/configs/sn2_defconfig 1.8 vs edited =====
--- 1.8/arch/ia64/configs/sn2_defconfig	2004-06-24 06:42:21 -07:00
+++ edited/arch/ia64/configs/sn2_defconfig	2004-07-17 09:24:59 -07:00
@@ -24,6 +24,7 @@
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
@@ -85,6 +86,7 @@
 # Firmware Drivers
 #
 CONFIG_EFI_VARS=y
+# CONFIG_EFI_PCDP is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 
@@ -271,7 +273,6 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_MEGARAID is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_SVW is not set
@@ -527,8 +528,6 @@
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_STALDRV is not set
-CONFIG_SGI_L1_SERIAL=y
-CONFIG_SGI_L1_SERIAL_CONSOLE=y
 
 #
 # Serial drivers
@@ -538,6 +537,8 @@
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_SGI_L1_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -573,6 +574,11 @@
 # CONFIG_I2C is not set
 
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
 # Misc devices
 #
 
@@ -751,6 +757,7 @@
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -785,6 +792,7 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -885,6 +893,7 @@
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
@@ -935,6 +944,7 @@
 # CONFIG_CRYPTO_AES is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
 # CONFIG_CRYPTO_ARC4 is not set
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

             reply	other threads:[~2004-07-17 21:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-17 21:04 Jesse Barnes [this message]
2004-07-17 23:24 ` [PATCH] update sn2_defconfig to include new console Keith Owens
2004-07-18 19:34 ` Jesse Barnes
2004-07-18 19:57 ` Jesse Barnes
2004-07-18 20:15 ` Jesse Barnes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200407171704.08219.jbarnes@engr.sgi.com \
    --to=jbarnes@engr.sgi.com \
    --cc=linux-ia64@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox