From: Horms <horms@verge.net.au>
To: linux-ia64@vger.kernel.org
Subject: Kexec/Kdump: whitespace cleanups
Date: Wed, 20 Sep 2006 02:43:00 +0000 [thread overview]
Message-ID: <20060920024544.628886000@tabatha.lab.ultramonkey.org> (raw)
Remove trailing whitespace introduced by IA64 Kexec/Kdump patch for 2.6.18-rc6
See: http://permalink.gmane.org/gmane.linux.ports.ia64/14988
Signed-Off-By: Simon Horman <horms@verge.net.au>
Index: linux-2.6/arch/ia64/kernel/crash.c
=================================--- linux-2.6.orig/arch/ia64/kernel/crash.c 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/arch/ia64/kernel/crash.c 2006-09-20 10:48:34.000000000 +0900
@@ -25,7 +25,7 @@
atomic_t kdump_cpu_freezed;
int kdump_on_init = 1;
-ssize_t
+ssize_t
copy_oldmem_page(unsigned long pfn, char *buf,
size_t csize, unsigned long offset, int userbuf)
{
@@ -131,7 +131,7 @@
#endif
}
-static void
+static void
machine_kdump_on_init(void)
{
local_irq_disable();
@@ -168,7 +168,7 @@
switch (val) {
case DIE_INIT_MONARCH_ENTER:
machine_kdump_on_init();
- break;
+ break;
case DIE_INIT_SLAVE_ENTER:
unw_init_running(kdump_cpu_freeze, NULL);
break;
@@ -178,12 +178,12 @@
#ifdef CONFIG_SYSCTL
static ctl_table kdump_on_init_table[] = {
- {
- .ctl_name = KERN_KDUMP_ON_INIT,
+ {
+ .ctl_name = KERN_KDUMP_ON_INIT,
.procname = "kdump_on_init",
- .data = &kdump_on_init,
+ .data = &kdump_on_init,
.maxlen = sizeof(int),
- .mode = 0644,
+ .mode = 0644,
.proc_handler = &proc_dointvec,
},
{ .ctl_name = 0 }
@@ -191,9 +191,9 @@
static ctl_table sys_table[] = {
{
- .ctl_name = CTL_KERN,
+ .ctl_name = CTL_KERN,
.procname = "kernel",
- .mode = 0555,
+ .mode = 0555,
.child = kdump_on_init_table,
},
{ .ctl_name = 0 }
@@ -216,7 +216,7 @@
#ifdef CONFIG_SYSCTL
if ((ret = register_sysctl_table(sys_table, 0)) != 0)
return ret;
-#endif
+#endif
return 0;
}
Index: linux-2.6/arch/ia64/kernel/efi.c
=================================--- linux-2.6.orig/arch/ia64/kernel/efi.c 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/arch/ia64/kernel/efi.c 2006-09-20 10:49:40.000000000 +0900
@@ -1126,7 +1126,7 @@
#ifdef CONFIG_KEXEC
insert_resource(res, &efi_memmap_res);
insert_resource(res, &boot_param_res);
- if (crashk_res.end > crashk_res.start)
+ if (crashk_res.end > crashk_res.start)
insert_resource(res, &crashk_res);
#endif
}
@@ -1137,12 +1137,12 @@
/* find a block of memory aligned to 64M exclude reserved regions
rsvd_regions are sorted
*/
-unsigned long
-kdump_find_rsvd_region (unsigned long size,
+unsigned long
+kdump_find_rsvd_region (unsigned long size,
struct rsvd_region *r, int n)
{
int i;
- u64 start, end;
+ u64 start, end;
u64 alignment = 1UL << _PAGE_SIZE_64M;
void *efi_map_start, *efi_map_end, *p;
efi_memory_desc_t *md;
@@ -1173,8 +1173,8 @@
return start;
}
- printk(KERN_WARNING "Cannot reserve 0x%lx byte of memory for crashdump\n",
+ printk(KERN_WARNING "Cannot reserve 0x%lx byte of memory for crashdump\n",
size);
return ~0UL;
}
-#endif
+#endif
Index: linux-2.6/arch/ia64/kernel/iosapic.c
=================================--- linux-2.6.orig/arch/ia64/kernel/iosapic.c 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/arch/ia64/kernel/iosapic.c 2006-09-20 10:48:46.000000000 +0900
@@ -301,7 +301,7 @@
list_for_each_entry(rte, &info->rtes,
rte_list) {
iosapic_write(rte->addr,
- IOSAPIC_RTE_LOW(rte->rte_index),
+ IOSAPIC_RTE_LOW(rte->rte_index),
IOSAPIC_MASK);
iosapic_eoi(rte->addr, vec);
}
Index: linux-2.6/arch/ia64/kernel/machine_kexec.c
=================================--- linux-2.6.orig/arch/ia64/kernel/machine_kexec.c 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/arch/ia64/kernel/machine_kexec.c 2006-09-20 10:47:43.000000000 +0900
@@ -102,7 +102,7 @@
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
-
+
/* Mask CMC and Performance Monitor interrupts */
ia64_setreg(_IA64_REG_CR_PMV, 1 << 16);
ia64_setreg(_IA64_REG_CR_CMCV, 1 << 16);
Index: linux-2.6/arch/ia64/kernel/setup.c
=================================--- linux-2.6.orig/arch/ia64/kernel/setup.c 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/arch/ia64/kernel/setup.c 2006-09-20 10:47:07.000000000 +0900
@@ -258,7 +258,7 @@
#ifdef CONFIG_KEXEC
/* crashkernel=size@offset specifies the size to reserve for a crash
* kernel.(offset is ingored for keep compatibility with other archs)
- * By reserving this memory we guarantee that linux
+ * By reserving this memory we guarantee that linux
* never set's it up as a DMA target.
* Useful for holding code to do something appropriate
* after a kernel panic.
@@ -270,7 +270,7 @@
size = memparse(from + 12, &from);
if (size) {
sort_regions(rsvd_region, n);
- base = kdump_find_rsvd_region(size,
+ base = kdump_find_rsvd_region(size,
rsvd_region, n);
if (base != ~0UL) {
rsvd_region[n].start Index: linux-2.6/include/asm-ia64/kexec.h
=================================--- linux-2.6.orig/include/asm-ia64/kexec.h 2006-09-20 10:46:56.000000000 +0900
+++ linux-2.6/include/asm-ia64/kexec.h 2006-09-20 10:47:30.000000000 +0900
@@ -44,7 +44,7 @@
extern void kexec_disable_iosapic(void);
extern void crash_save_this_cpu(void);
struct rsvd_region;
-extern unsigned long kdump_find_rsvd_region(unsigned long size,
+extern unsigned long kdump_find_rsvd_region(unsigned long size,
struct rsvd_region *rsvd_regions, int n);
extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
extern int kdump_status[];
--
Horms
H: http://www.vergenet.net/~horms/
W: http://www.valinux.co.jp/en/
reply other threads:[~2006-09-20 2:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060920024544.628886000@tabatha.lab.ultramonkey.org \
--to=horms@verge.net.au \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox